GROWNSY W2 Double Bottle Warmer: Fast Warming Function Reference Chart
This document provides a reference chart for the fast warming function of the GROWNSY W2 Double Bottle Warmer. It outlines recommended warming times based on bottle material, capacity, and warming mode.
Warming Modes:
- Fast & Sterilize: For quick warming and sterilization.
- 24H / Food Heating: For constant warming or heating food.
- Milk Warming: For warming milk.
Important Notes for Fast Warming:
- Please put the lid on while fast warming.
- Add 80ml / 2.7oz purified water for fast warming ('Fast & Sterilize').
- Add purified water to MAX for constant warming ('24H' / Food Heating) or milk warming ('Milk Warming').
Plastic Bottles
Capacities: 60mL / 2oz, 120mL / 4oz, 180mL / 6oz, 240mL / 8oz
| Capacity | Fast & Sterilize | 24H / Food Heating | Milk Warming | Additional Warming Times |
| 60mL / 2oz | 5 min | 7 min | 8 min | 10 min |
| 120mL / 4oz | 4 min | 6 min | 7 min | 8 min |
| 180mL / 6oz | 8 min | 10 min | 11 min | 13 min |
| 240mL / 8oz | 6 min | 7 min | 8 min | 10 min |
Glass Bottles
Capacities: Approximately 80ml / 2.7oz, and an unspecified capacity.
| Capacity | Fast & Sterilize | 24H / Food Heating | Milk Warming | Additional Warming Times |
| 80ml / 2.7oz | 4 min | 6 min | 7 min | 9 min |
| [Unspecified Capacity] | 3 min | 5 min | 5 min | 6 min |
Milk Bags
Capacities: [Capacity 1], [Capacity 2]
| Capacity | Fast & Sterilize | 24H / Food Heating | Milk Warming | Additional Warming Times |
| [Capacity 1] | 3 min | 5 min | 7 min | 8 min |
| [Capacity 2] | 3 min | 4 min | 5 min | 6 min |
Important Usage and Maintenance Information
Usage Recommendations:
- Take the baby bottle out in time to avoid over-heating.
- The times listed are recommendations ONLY. This reference sheet does not provide accurate times as initial temperature, bottle material, and ambient temperature will impact the final milk temperature.
- Check the milk temperature by sprinkling a few drops on the inside of your wrist:
- If the milk temperature is lower than expected, please continue heating for 0.5 / 1 minute.
- If the milk temperature is higher than expected, please cool the milk for a while before feeding.
Maintenance:
- Please descale the bottle warmer regularly to prevent malfunction such as automatic shutdown and inability to warm the milk.
