Safety Data Sheet
Section 1. Product and Company Identification
1.1 Model Number: SCS638S v1
1.2 Description: High Strength Retainer 50ml
Unique Formula Identifier (UFI): RDDW-NU1X-300C-WGW3
1.3 Manufacturer: Jack Sealey Ltd. t/a Sealey Group. Kempson Way, Bury St. Edmunds, Suffolk, IP32 7AR UK
Jack Sealey (EU) Ltd t/a Sealey Group. Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
Email: technicalcompliance@sealey.co.uk
1.4 Emergency telephone number: 44 (0) 1284 757 500 (Office Hours)
Date of source compilation: 24/02/2015
Section 2. Hazards Identification
2.1 Classification of the substance or mixture. STOT SE 3: H335; Aquatic Chronic 3: H412; Eye Dam. 1: H318; Skin Irrit. 2: H315; Skin Sens. 1: H317; -: EUH208
Risk phrases: R20: Harmful by inhalation. R36/37/38: Irritating to eyes, respiratory system and skin. R43: May cause sensitisation by skin contact.
Safety phrases: S24: Avoid contact with skin. S37: Wear suitable gloves.
2.2 Label elements.
Hazard pictogram(s): [Not specified in text]
Signal Word: Danger
Hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary statements:
- P261: Avoid breathing vapours.
- P264: Wash contaminated skin thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P302+352: IF ON SKIN: Wash with plenty of water.
- P304+340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P305+351+338: IF EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P312: Call a POISON CENTER/doctor if you feel unwell.
- P321: Specific treatment (see information on this label).
- P332+313: If skin irritation occurs: Get medical advice/attention.
- P337+313: If eye irritation persists: Get medical advice/attention.
2.3 Other hazards. None identified.
Section 3. Substances
1For full text of Statements, see Section 16.
| Chemical Name | CAS No. | Concentration | Classification | Hazard Statements |
|---|---|---|---|---|
| Acrylic Resin | 109-16-0 | 31% | Not classified | - |
| Polyglycol Dimethacrylate | 923-26-2 | 24.3% | Not classified | - |
| 2-Hydroxypropyl Methacrylate | 15625-89-5 | 12.1% | Eye Irrit. 2, Skin Irrit. 2, Skin Sens. 1 | H319, H315, H317 |
| 2,2-Bis(Acryloyloxymethyl)Butyl Acrylate | 79-10-7 | 3% | Flam. Liq. 3, Acute Tox. 4, Acute Tox. 4, Acute Tox. 4 | H226, H332, H312, H302 |
| Acrylic Acid | 99-97-8 | 3% | Skin Corr. 1A, Aquatic Acute 1, Org. Perox. E | H314, H400, H242 |
| Cumene Hydroperoxide | 80-15-9 | 1% | Acute Tox. 3, Acute Tox. 4, Acute Tox. 4, Acute Tox. 4, STOT RE 2 | H331, H312, H302, H373 |
| N,N-Dimethyl-P-Toluidine | 99-97-8 | 0.5% | Skin Corr. 1B, Aquatic Chronic 2, Acute Tox. 3 | H314, H411, H331 |
| 1-Acetyl-2-Phenylhydrazine | 114-83-0 | 0.5% | Acute Tox. 3, Acute Tox. 3, STOT RE 2 | H311, H301, H373 |
| Cumene | 98-82-8 | 0.34% | Aquatic Chronic 3 | H412 |
Section 4. First Aid Measures
4.1 Description of first aid measures
First Aid measures, general. Call a poison centre or a doctor if unwell. Quote UFI in Section 1.2.
Inhalation Remove casualty from exposure ensuring one's own safety whilst doing so. Get medical attention if any discomfort continues.
Skin Contact Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash immediately with plenty of soap and water.
Eye Contact Bathe the eye with running water for 15 minutes. Consult a doctor.
Ingestion Wash out mouth with water. Get medical attention if any discomfort continues.
4.2. Most important symptoms and effects, both acute and delayed
Skin contact: There may be irritation and redness at the site of contact. Irritation or pain may occur at the site of contact. An itchy rash may occur at the site of contact. Blistering may occur.
Eye contact: There may be irritation and pain. The eyes may water profusely. Corneal burns may occur.
Ingestion: There may be soreness and redness of the mouth and throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.
4.3. Indication of any immediate medical attention and special treatment needed
Immediate / special treatment: Eye bathing equipment should be available on the premises.
Section 5. Fire Fighting Measures
5.1. Extinguishing media Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers.
5.2. Special hazards arising from the substance or mixture In combustion emits toxic fumes of carbon dioxide / carbon monoxide. In combustion emits toxic fumes of nitrogen oxides. In combustion emits toxic fumes of sulphur oxides.
5.3. Advice for fire-fighters Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Section 6. Accidental Release Measures
6.1. Personal precautions, protective equipment and emergency procedures If outside do not approach from downwind. If outside keep bystanders upwind and away from danger point. Mark out the contaminated area with signs and prevent access to unauthorised personnel. Turn leaking containers leak-side up to prevent the escape of liquid.
6.2. Environmental precautions Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3. Methods and material for containment and cleaning up Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
6.4. Reference to other sections See Section 7 for information on Safe Handling. See Section 8 for information of Personal Protective Equipment. See Section 13 for information on disposal.
Section 7. Handling and Storage
7.1. Precautions for safe handling Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area. Do not handle in a confined space. Avoid the formation or spread of mists in the air.
7.2. Conditions for safe storage, including any incompatibilities Store in a cool, well ventilated area. Keep container tightly closed.
7.3. Specific end use(s) Intended for use as a High Strength Retainer: Model Number identified in 1.1 with Description stated in 1.2.
Section 8. Exposure Controls/Personal Protection
8.1. Control parameters
Workplace exposure limits.
| Substance | CAS number | Long term | Short term | ||
|---|---|---|---|---|---|
| ppm | mg.m3 | ppm | mg.m3 | ||
| Cumene | 98-82-8 | 25 | 125 | 50 | 250 |
Appropriate Engineering Controls Ensure there is sufficient ventilation of the area.
Eye/Face Protection Safety glasses with side shields or chemical safety goggles. Ensure eye bath is to hand.
Skin Protection EN 374 Chemical resistant protective gloves. Wear suitable protective clothing.
Respiratory Protection Self-contained breathing apparatus must be available in case of emergency.
Section 9. Physical and Chemical Properties
9.1. Information on basic physical and chemical properties
The following information is not a technical specification or sales specification.
(a) Appearance: Green liquid.
(b) Odour: Sweet smell.
(c) Odour threshold: No data available.
(d) pH: Not applicable.
(e) Melting point/freezing point: > 100oC
(f) Initial boiling point and boiling range: No data available.
(g) Flash point: > 93oC
(h) Evaporation rate: No data available.
(i) Flammability (solid, gas): No data available.
(j) Upper/lower flammability or explosive limits: No data available.
(k) Vapour pressure: < = 666.6Pa
(l) Vapour density: 1.08
(m) Relative density: No data available.
(n) Solubility(ies): < 0.1% soluble in water.
(o) Partition coefficient: n-octanol/water: No data available.
(p) Auto-ignition temperature: No data available.
(q) Decomposition temperature: No data available.
(r) Viscosity: No data available.
(s) Explosive properties: No data available.
(t) Oxidising properties. No data available.
9.2 Other information -
Section 10. Stability and Reactivity
10.1. Reactivity Stable under recommended transport or storage conditions.
10.2. Chemical stability Stable under normal conditions.
10.3. Possibility of hazardous reactions Hazardous reactions will not occur under normal transport or storage conditions.
10.4. Conditions to avoid Decomposition may occur on exposure to conditions or materials listed below. Heat. Direct sunlight. Sources of ignition.
10.5. Incompatible materials Strong oxidising agents. Strong acids.
10.6. Hazardous decomposition products In combustion emits toxic fumes.
Section 11. Toxicological Information
11.1. Information on toxicological effects
Hazardous ingredients:
- 2-HYDROXYPROPYL METHACRYLATE: ORL MUS LD50 7964 mg/kg
- 2,2-BIS(ACRYLOYLOXYMETHYL)BUTYL ACRYLATE: IPR RAT LD50 55 mg/kg, ORL RAT LD50 5190 mg/kg
- ACRYLIC ACID: IPR RAT LD50 22 mg/kg, ORL MUS LD50 830 mg/kg, ORL RAT LD50 1250 mg/kg, SCU MUS LD50 1590 mg/kg
- CUMENE HYDROPEROXIDE: ORL MUS LD50 5 mg/kg, ORL RAT LD50 382 mg/kg, SCU RAT LD50 382 mg/kg
- N,N-DIMETHYL,P-TOLUIDINE: IPR MUS LD50 212 mg/kg
- CUMENE: ORL MUS LD50 12750 mg/kg, ORL RAT LD50 1400 mg/kg
Relevant effects for mixture:
- Acute toxicity (harmful): INH (calculated)
- Irritation: OPT, INH, DRM (calculated)
- Sensitisation: DRM (calculated)
Symptoms / routes of exposure
Skin contact: There may be irritation and redness at the site of contact. Irritation or pain may occur at the site of contact. An itchy rash may occur at the site of contact. Blistering may occur.
Eye contact: There may be irritation and pain. The eyes may water profusely. Corneal burns may occur.
Ingestion: There may be soreness and redness of the mouth and throat.
Inhalation: There may be irritation of the throat with a feeling of tightness in the chest. Exposure may cause coughing or wheezing.
Delayed / immediate effects: Immediate effects can be expected after short-term exposure.
Section 12. Ecological Information
12.1. Toxicity No data available.
12.2. Persistence and degradability No data available.
12.3. Bioaccumulative potential No data available.
12.4. Mobility in soil No data available.
12.5. Results of PBT and vPvB assessment This product is not identified as a PBT/vPvB substance.
12.6. Other adverse effects No data available.
Section 13. Disposal Considerations
13.1. Waste treatment methods Dispose of in accordance with local authority regulations.
Section 14. Transport Information
This product does not require classification for transport.
Section 15. Regulatory Information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture No data available.
15.2. Chemical safety assessment No data available.
Section 16. Additional Information
Full text of Statements used in Section 3;
- H226: Flammable liquid and vapour.
- H242: Heating may cause a fire.
- H301: Toxic if swallowed.
- H302: Harmful if swallowed.
- H311: Toxic in contact with skin.
- H312: Harmful in contact with skin.
- H314: Causes severe skin burns and eye damage.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H331: Toxic if inhaled.
- H332: Harmful if inhaled.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H400: Very toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
- H412: Harmful to aquatic life with long lasting effects.
The above information is believed to be accurate and represents the best information currently available.
No warranty is expressed or implied by the above information.
We assume no liability resulting from use of the above information.
The end user should conduct their own investigations to determine the suitability of the above information for their particular purpose.
Issue level Date Revisions
- 1 08/04/2016 First issue.
- 2 27/03/2017 Format only.
- 3 10/01/2025 Section 3 / Section 8.
- 4 15/01/2025 Section 1.2 Section 4
- 5 13/08/2025 Template
