INSTEON Home Kit Quick Start Guide

INSTEON Hub

The INSTEON Hub is the central component of your smart home system. It connects to your home network and allows you to control your INSTEON devices.

Status LED: Indicates the hub's operational state: ? Idle, ? Linking, ? Unlinking.
Ports: Features an Ethernet Port for network connectivity and a Power port for electrical connection.
Button: Includes a recessed Factory Reset Button.
Included Cables: Comes with an Ethernet Cable and a Power Cable. It is recommended to use only the cables provided with the unit.

Getting Started

Step 1: Download the App
Download and install the latest INSTEON for Hub App from your device's app store. Scan the QR Code for the free app.
Step 2: Setup Your Hub
Launch the INSTEON for Hub App and follow the on-screen instructions to set up your INSTEON Hub.
[+] Add INSTEON Hub
Step 3: Add Devices
Follow the on-screen instructions within the app to add your INSTEON devices to the hub.
[+] Add Device

Remote Access

Enable remote access to monitor and control your devices from anywhere. To configure remote access, navigate to Settings > House > Remote Access Guide within the app.

Support and Resources

ℹ️ For assistance, contact INSTEON Support at 866.243.8022.

For video tutorials, product support, and additional information, visit insteon.com/support.

? [Manual]
? [Video Tutorial]
? [Support Phone]

Device Overviews

On/Off Module

This module is used to control lights and appliances. It features a Status LED (? On, ? Off) and manual controls for On, Off, and a Set Button. It supports a maximum load of up to 1,800W/15A. Learn more at insteon.com/onoffmodule-qsg.

Motion Sensor

This sensor detects motion. Key components include a Status LED, a Wall Mount Retention Slot, Settings Jumpers for configuration, a 9V Battery compartment (battery included), and a Set Button. An internal view (with cover removed) is provided to show these components. Learn more at insteon.com/motionsensor-qsg.

Open/Close Sensor

This sensor is designed to detect the opening or closing of doors and windows. It includes a Set Button, a Status LED, and a Magnet component for sensing. The unit is powered by an AA Battery (battery included), as shown in the internal view (with cover removed). Learn more at insteon.com/openclosesensor-qsg.

Thermostat

This device manages your home's temperature. It features buttons for Temperature Adjust (up/down arrows), a Mode button, and a Set Button. A Status LED indicates its operational state, and the display shows the current temperature (e.g., 72°). Learn more at insteon.com/thermostat-qsg.

WiFi Camera

This camera provides visual monitoring for your home. It is equipped with a Day/Night Sensor, Night Vision LEDs, a Microphone, and a Speaker. Connectivity options include an Ethernet port, a Power port (DC5V2A), and an Audio Antenna. Learn more at insteon.com/wificamera-qsg.

	INSTEON Connected Kit Quick Start Guide: Setup and Device Overview Get started with your INSTEON Connected Kit. This quick start guide covers the setup of the INSTEON Hub and introduces key components like Dimmer Modules, Open/Close Sensors, Motion Sensors, Leak Sensors, Thermostats, and WiFi Cameras for a connected home experience.
	INSTEON Home Kit Quick Start Guide: Setup and Device Integration A comprehensive quick start guide for the INSTEON Home Kit, detailing the setup of the INSTEON Hub and integration of various smart home devices including On/Off Modules, Motion Sensors, Open/Close Sensors, Thermostats, and WiFi Cameras.
	INSTEON Assurance Kit Quick Start Guide: Setup and Device Installation A quick start guide for the INSTEON Assurance Kit, covering Hub setup, app installation, and adding devices like Dimmer Modules, Open/Close Sensors, Motion Sensors, and Leak Sensors.
	INSTEON Connected Kit Quick Start Guide A quick start guide for setting up the INSTEON Connected Kit, detailing the INSTEON Hub and various smart home devices including Dimmer Modules, Sensors, Thermostats, and WiFi Cameras.
	INSTEON Home Monitoring and Control Kit Quick Start Guide Begin your smart home journey with the INSTEON Home Monitoring and Control Kit. This quick start guide provides essential instructions for setting up the INSTEON Hub, connecting devices, configuring remote access, and automating your home environment.
	INSTEON Starter Kit Quick Start Guide A quick start guide for the INSTEON Starter Kit, covering hub setup, app installation, device pairing (Dimmer Module, Open/Close Sensor, Motion Sensor, Leak Sensor), remote access, and scheduling. Includes component details and support information.
	INSTEON Connected Kit Quick Start Guide Get started with your INSTEON Connected Kit. This guide provides setup instructions for the Hub and details on various INSTEON smart home devices including the Dimmer Module, Open/Close Sensor, Motion Sensor, Leak Sensor, Thermostat, and WiFi Camera.
	INSTEON Starter Kit Quick Start Guide: Setup and Control Your Smart Home Get started with your INSTEON Starter Kit. This guide provides instructions for setting up the INSTEON Hub, adding devices like On/Off Modules, Motion Sensors, and WiFi Cameras, and configuring remote access and schedules for your smart home.