INSTEON Assurance Kit Quick Start Guide: Setup and Device Installation

Introduction

This guide provides instructions for setting up your INSTEON Assurance Kit and its associated devices.

The INSTEON Assurance Kit includes a Hub, Dimmer Modules, Open/Close Sensors, Motion Sensors, and Leak Sensors, enabling a connected home experience.

INSTEON Hub

The INSTEON Hub is the central controller for your smart home devices.

Hub Components:

Status LED: Indicates the operational state of the Hub.
- Idle: Green flashing ?
- Linking: Blue flashing ?
- Unlinking: Red flashing ?
Ethernet Port: For connecting the Hub to your internet router.
Power Port: For connecting the Hub to a power source.
Factory Reset Button: Used for resetting the Hub to its default settings.

Included Cables:

Ethernet Cable
Power Cable

Setup Your Kit

Step 1: Connect the Hub

Connect the INSTEON Hub to power and your internet router using only the provided Ethernet and Power cables. Ensure the Hub is connected directly to a wall outlet, avoiding power strips and switched outlets.

[Diagram: INSTEON Hub connected via Ethernet cable to a router and via power cable to a wall outlet. A green checkmark ️✅ is shown. A power strip with a red cross ❌ is shown below, indicating it should not be used.]

INSTEON for Hub App

Step 2: Download and Install the App

Download and install the latest INSTEON for Hub App from your device's app store. You can search for "INSTEON for Hub".

[Diagram: A smartphone displaying the INSTEON for Hub app interface with an "INSTALL" button.]

You can also scan a QR code (not included here) to find the app in your store.

Step 3: Connect and Create Account

Connect your smartphone to the same network as the INSTEON Hub. Launch the INSTEON for Hub App and create a new account or sign in if you already have one.

[Diagram: A smartphone displaying the INSTEON app with options to "Sign In" and "Create an Account".]

Add Devices

Step 4: Add Your Devices

Follow the on-screen instructions within the INSTEON for Hub App to add your INSTEON devices, such as Dimmer Modules.

[Diagram: A smartphone displaying a large "+" icon, representing the action of adding a new device.]

For additional documentation, visit: insteon.com/support

INSTEON Device Overviews

Dimmer Module

The INSTEON Dimmer Module allows you to control the brightness of lights.

Status LED:
- On: Green ?
- Off: Red ?
Controls: On/Brighten, Off/Dim
Set Button: Used for linking and configuration.

It supports up to a 300W maximum load.

Learn more: insteon.com/dimmermodule-qsg

Open/Close Sensor

The INSTEON Open/Close Sensor detects when doors, windows, or cabinets are opened or closed.

Status LED: Green ?
Set Button: For linking and configuration.
Magnet: Used in conjunction with the sensor to detect open/close states.
Power: Powered by an included AA Battery.

[Diagram: Shows the Open/Close Sensor and its magnet. Another view shows the sensor with the cover removed, revealing the AA battery compartment and status LED.]

Learn more: insteon.com/openclosesensor-qsg

Motion Sensor

The INSTEON Motion Sensor detects movement within its range.

Status LED: Red ?
Set Button: For linking and configuration.
Wall Mount Retention Slot: For mounting the sensor.
Settings Jumpers: For configuring sensor behavior.
Power: Powered by an included 9V Battery.

[Diagram: Shows the Motion Sensor. Another view shows the sensor with the cover removed, revealing the 9V battery compartment, settings jumpers, and set button.]

Learn more: insteon.com/motionsensor-qsg

Leak Sensor

The INSTEON Leak Sensor detects the presence of water.

Status LED: Green ?
Set Button: For linking and configuration.
Water Contacts (Metal): Detect water when bridged.
Power: Powered by an included AA Battery.

[Diagram: Shows the Leak Sensor with its water contacts. Another view shows the sensor with the cover removed, revealing the AA battery compartment.]

Learn more: insteon.com/leaksensor-qsg

Remote Access

Enable remote access to monitor and control your INSTEON devices from outside your home. To configure remote access, navigate to Settings > House > Remote Access Guide within the INSTEON for Hub App to set up port forwarding.

[Diagram: A globe with a house icon and an airplane icon, symbolizing remote access from anywhere.]

Create a Schedule

You can create schedules for individual devices or entire scenes to automate your home. Access this feature by going to Settings and tapping "Schedules" in the INSTEON for Hub App.

[Diagram: Icons representing time-based scheduling: a clock for time, a sun for daytime events, and a moon/stars for nighttime events.]

Support

For assistance, contact INSTEON Support at 866.243.8022.

Protected under U.S. and foreign patents. Visit www.insteon.com/patents.

	INSTEON Connected Kit Quick Start Guide: Setup and Device Overview Get started with your INSTEON Connected Kit. This quick start guide covers the setup of the INSTEON Hub and introduces key components like Dimmer Modules, Open/Close Sensors, Motion Sensors, Leak Sensors, Thermostats, and WiFi Cameras for a connected home experience.
	INSTEON Starter Kit Quick Start Guide A quick start guide for the INSTEON Starter Kit, covering hub setup, app installation, device pairing (Dimmer Module, Open/Close Sensor, Motion Sensor, Leak Sensor), remote access, and scheduling. Includes component details and support information.
	Insteon Assurance Kit Quick Start Guide: Setup and Device Integration This Insteon Assurance Kit Quick Start Guide helps you set up your Insteon Hub and connect various smart home devices. Learn how to install and configure your Insteon system for remote access and automation.
	INSTEON Connected Kit Quick Start Guide A quick start guide for setting up the INSTEON Connected Kit, detailing the INSTEON Hub and various smart home devices including Dimmer Modules, Sensors, Thermostats, and WiFi Cameras.
	INSTEON Home Monitoring and Control Kit Quick Start Guide Begin your smart home journey with the INSTEON Home Monitoring and Control Kit. This quick start guide provides essential instructions for setting up the INSTEON Hub, connecting devices, configuring remote access, and automating your home environment.
	INSTEON Home Kit Quick Start Guide: Setup and Device Integration A comprehensive quick start guide for the INSTEON Home Kit, detailing the setup of the INSTEON Hub and integration of various smart home devices including On/Off Modules, Motion Sensors, Open/Close Sensors, Thermostats, and WiFi Cameras.
	INSTEON Home Kit Quick Start Guide A quick start guide for setting up the INSTEON Home Kit, including the INSTEON Hub and various smart home devices like On/Off Modules, Motion Sensors, Open/Close Sensors, Thermostats, and WiFi Cameras. Learn how to connect your devices and manage your smart home.
	INSTEON Connected Kit Quick Start Guide Get started with your INSTEON Connected Kit. This guide provides setup instructions for the Hub and details on various INSTEON smart home devices including the Dimmer Module, Open/Close Sensor, Motion Sensor, Leak Sensor, Thermostat, and WiFi Camera.