MAULstandard Pin Boards
Model Numbers: 644 38, 644 42
Product Overview
The MAULstandard Pin Boards are designed for efficient presentation and organization. This document provides assembly and mounting instructions for the MAULstandard pin board series.
Included Components
The following components are typically included for mounting:
- 1 x Pin Board
- 2 x Mounting Brackets (L-shaped metal pieces)
- 2 x Screws (4 x Ø 4 x 30 mm)
- 4 x Wall Plugs (4 x Ø 6 x 30 mm)
Note: Ensure you have the correct tools for installation, such as a drill and screwdriver.
Mounting Instructions
Follow these steps for secure wall mounting:
Wall Mounting Configuration A
This diagram illustrates attaching a mounting bracket to the wall. A wall plug (Ø 6 x 30 mm) is inserted into a pre-drilled hole in the wall. A screw (Ø 4 x 30 mm) is then used to fix the bracket to the wall through the plug. The diagram indicates a required wall depth of at least 70 mm for the plug and shows the bracket positioned at an angle of approximately 30 degrees relative to the wall surface before final tightening.
Key Dimensions: 25 mm (distance from wall surface to bracket mounting point), ~30° (angle).
Wall Mounting Configuration B
This diagram shows how the pin board attaches to the wall-mounted bracket. The bracket has a lip or hook that engages with the back of the pin board. A specific distance of 24 mm is indicated, likely representing the clearance or engagement depth between the board and the wall via the bracket.
Key Dimension: 24 mm (clearance/engagement).
Important Safety Information & Warnings
WARNING! The enclosed assembly materials are intended exclusively for mounting on solid and firm surfaces such as massive masonry, solid brick, concrete, or solid wood walls. The wall covering should not exceed 3 mm in thickness. For other or unknown wall types, consult a specialist.
It is crucial to verify that the wall or ceiling construction, as well as the mounting materials used, are suitable for supporting the forces involved. Improper mounting can endanger the user.
Mounting should only be performed by qualified personnel.
Additional dimensions shown in diagrams suggest specific screw and plug sizes (e.g., Ø 3.5 mm x 35 mm screws, Ø 2.5 mm x 25 mm screws, Ø 8 mm x 45 mm wall plugs, Ø 6 mm x 35 mm wall plugs) which may be used depending on wall type and specific requirements. Always use fixings appropriate for your wall type.
Product Variants
The MAULstandard pin boards are available in various colors:
- Blue: Model 6443834 / 6444234
- Dark Blue: Model 6443835 / 6444235
- Orange: Model 6443843 / 6444243
