Warranty Information
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered/removed serial number invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Contact the Customer Service Department at 1 (800) 328-7363, Monday through Friday, between 8:00 am and 4:30 pm (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Warranty is valid only in North America.
Important Safety Warnings
⚠️ WARNING: Please follow all instructions to ensure your child's safety. Keep these instructions for future reference.
⚠️ WARNING: Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out; always use the safety harness and ensure children are properly positioned.
⚠️ WARNING: Never leave children unattended.
General Precautions
- Items like purses, shopping bags, parcels, or diaper bags may alter the stroller's balance, creating a hazardous, unstable condition.
- Ensure the stroller is fully opened and locked before allowing a child near it.
- NEVER use the stroller on stairways or escalators.
- NEVER allow your stroller to be used as a toy.
Weight Limits
- Storage Basket: Maximum 5 lbs (2.26 kg)
- Parent Tray & Child Tray: Maximum 3 lbs (1.36 kg)
- Seat Belt Storage Pocket (for seat belt only): Maximum 1 lb (0.45 kg)
- Front Seat: Maximum 50 lbs (22.68 kg)
- Rear Seat: Maximum 50 lbs (22.68 kg)
- Platform/Jumpseat: Maximum 60 lbs (27.21 kg)
- Platform/Jump Seat Child Requirements: Minimum 2 1/2 years old, maximum 40 inches (101.6 cm) tall.
- Combined weight for children on platform/jump seat: Maximum 110 lbs (49.89 kg) may cause excessive wear and stress.
Cleaning and Maintenance
- Clean with mild household soap or detergent and warm water using a sponge or clean cloth.
- Regularly check for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.
- Discontinue use if the stroller malfunctions or becomes damaged. Contact customer service for repair or replacement parts.
If you experience difficulty with assembly, missing parts, or use, DO NOT return to the store. Contact Customer Service directly at 1-800-328-7363 (Monday-Friday, 8:00 am - 4:30 pm PST).
Parts Identification
- Front Canopy
- Cup Holders (x2)
- Parent Tray
- Child Tray
- Front Wheel
- Fender
- Rear Axle
Assembly Instructions
Front Wheels
To attach front wheels: Unlock the release lever. Unfold stroller frame by sliding the thumb trigger left and squeezing the pull trigger while pulling backward on the handle. Lean stroller back so it rests on the handle with legs pointing upward. Position front wheels over front leg tubes, aligning housing holes with legs. Push down firmly until wheels lock. Tug wheels to ensure they are securely attached.
Fender
Align the front fender with the front frame assembly. Insert 3 screws through the underside of the front frame assembly into the fender's plastic tubes. Tighten screws until snug, but do not overtighten.
Rear Wheels
Position the rear axle over the rear leg tubes with brake pedals facing backward. Push down equally on both sides until wheels lock into place.
Child Tray
To attach: Push the tray downward onto each side of the front armrests until it snaps into place. Ensure it is securely latched.
To access the child seat: Pull one side of the release lever on the underside of the child tray and lift upward. The tray will lift and rotate out of the way.
To rotate the child tray for infant car seat attachment: Press red buttons on both sides to rotate down 90 degrees.
To remove the child tray: Pull both release levers on the underside and lift upward.
Cup Holders
To attach: Push cup holders downward onto armrests until they snap into place. To remove, pull the release lever on the underside.
Canopy
To attach: Line up male fittings on the canopy with slots on the armrest and push downward until snapped into place. To open, push forward on the front edge. To fold, pull backward on the front edge. To remove, press the snap button under the armrest and pull.
Parent Tray
To attach: Position the tray with hinges facing forward. Snap the tray to the stand at the top of the frame. Ensure it is securely latched.
Operation and Safety
Brakes
⚠️ WARNING: Always set brakes when the stroller is not being pushed to prevent it from rolling away. NEVER leave the stroller unattended on a hill or incline.
To engage brakes: Apply light downward pressure to the brake lever on each rear wheel. You may need slight forward/backward movement to align brake teeth with wheel brake cluster. Check that the stroller does not move and brakes are applied. To release, gently lift the brake lever.
Securing the Child
Front Seat - 5-Point Harness:
- Shoulder straps have 3 attachment positions. Select the position that places the strap level with or below the child's shoulder. Feed strap through appropriate slots (accessible from the rear of the seat) and reattach to the crotch buckle.
- Carefully place the child in the seat. Bring the safety harness around the child's waist and over the shoulders. Place the crotch strap between the child's legs. Insert male ends of shoulder/waist belts into the crotch strap buckle. Tighten harness for a snug fit.
- Release mechanism requires moderate effort to prevent accidental release by the child. Buckles may be stiff when first used.
Travel System - Safety Belt:
- Strap the safety belt over the infant car seat through the seat belt slots. Connect buckles.
- IT IS VERY IMPORTANT THAT THE INFANT CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED AROUND THE INFANT CAR SEAT.
Jump Seat - 3-Point Harness:
- Secure the child with the 3-point harness when sitting on the jump seat. The harness part is stored in the pocket on the back of the front seat.
Platform - Safety Belt:
- Secure the stand feature safety belt behind the child and engage the buckle. This is the same belt used for the rear infant car seat.
Reclining Seats
The front seat has two recline positions. To recline, rotate the recline bar and press backward on the seat back. To place in upright position, press upward on the seat back while rotating the recline bar.
⚠️ WARNING: The upright position should be used only for a child at least 6 months old.
Attaching Infant Car Seat
The infant car seat can be attached in either the front or rear seating position.
To attach in front seating position: Attach child tray in front position and rotate to vertical. Recline seat back. Position car seat facing rearward so shell fits into child tray and latches. Check car seat is firmly locked. Strap safety belt over car seat through slots and connect buckles. Tighten strap for a snug fit. IT IS VERY IMPORTANT THAT THE INFANT CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED AROUND THE INFANT CAR SEAT.
To attach in rear seating position: Attach child tray in front position and rotate to vertical. Turn car seat support tabs on stroller frame. Position car seat facing rearward so shell fits into child tray and latches. Check car seat is firmly locked. Strap safety belt over car seat through slots and connect buckles. Tighten strap for a snug fit. IT IS VERY IMPORTANT THAT THE INFANT CAR SEAT STRAP IS ALWAYS TIGHTLY FASTENED AROUND THE INFANT CAR SEAT.
To remove Infant Car Seat: Squeeze release handle at foot-end of seat and lift upward.
Jump Seat Usage
The rear platform and jump seat accommodate children at least 2 1/2 years old, with good balance and coordination, and not over 40 inches tall.
To use jump seat, remove child tray if attached.
Platform Usage
Position child on the platform facing forward, holding the frame. Secure the stand feature safety belt behind the child. Ensure child's feet are fully on the platform.
Folding and Unfolding the Stroller
⚠️ WARNING: Care must be taken when folding and unfolding to prevent finger entrapment.
Close canopy. It is recommended to remove the child tray from the rear seat before folding.
To fold: Pull stroller backward slightly to rotate front wheels forward. Slide red fold lock with thumb while squeezing large red fold button on handle, then push forward on handle. Release handle and push forward until folded. Lock release lever.
Maintenance
Seat Pad Cleaning
Clean the seat pad using only mild household soap or detergent and warm water on a sponge or clean cloth.
General Maintenance
Regularly check the stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.
