FL 3IN1 Series
120/140mm Unique Addressable RGB Fans
Installation
This section provides instructions for installing the FL 3IN1 Series fans.
Components:
- A: Fan (x3)
- B: Fan Hub (x1)
- C: Screws (x12)
- D: Cables (x1)
- E: Fan Screws (x3)
Diagram 1: Fan and Accessory Layout
Visual representation of the fan, fan hub, screws, and cables included in the package.
Diagram 2: Fan Mounting
Illustrates the process of mounting the fan to the computer case using screws.
Diagram 3: Fan Hub Connection
Shows how to connect the fans to the fan hub.
Connection
This section details the electrical connections for the fans.
Diagram 4: Standard Connection
Illustrates a typical connection setup for the fan, showing connections to a 4-PIN CPU_FAN header, with labels for +5V, D, and GND.
Diagram 5: RGB Connection
Illustrates the connection for RGB lighting, showing a 4-PIN connector with labels for +5V, D, and GND.
Environmental Information (RoHS Compliance)
The following table indicates the presence of hazardous substances in the components, in compliance with SJ/T 11364.
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr+6) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Plastic | O | O | O | O | O | O |
| Silicone Rubber | O | O | O | O | O | O |
| Integrated Circuit | O | O | O | O | O | O |
| Wire Material | O | O | O | O | O | O |
Notes:
- 'O' indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirement specified in GB/T 26572.
- 'X' indicates that the content of at least one hazardous substance in some homogeneous material of the component exceeds the limit requirement specified in GB/T 26572, but due to the limitations of technological development, there is no mature alternative solution. This complies with the environmental directives of the EU RoHS regulations.
- The Environmental Protection Use Period mark indicates that the environmental protection use period of the product under normal working temperature and humidity conditions is 10 years.
