INGATORP Drop-Leaf Table

Assembly Instructions

Before you begin, ensure you have the necessary tools: screwdrivers and a hammer.

Important Safety Information:

• Do not assemble on a soft surface like a carpet, as this can damage the parts.
• Ensure all parts are correctly aligned before tightening screws.
• If you encounter any difficulties, contact IKEA customer support.

Parts List:

The following parts are included in the package:

• Screws: 4x (100325), 8x (100038), 11x (112628), 2x (130424), 2x (123492), 4x (109510), 1x (101350), 16x (100507), 8x (101343)
• Dowels: 4x (110912), 1x (100843), 1x (100002), 6x (100507), 6x (101350), 4x (101343), 2x (101350)
• Cam Locks: 2x (110630), 8x (100712), 8x (100843)
• Brackets: 2x (139833), 4x (120171)
• Other: 1x (117616), 1x (120202)

Assembly Steps:

Step 1: Prepare the tabletop. Open the drop-leaf sections and place them on a protected surface.

Step 2: Attach the central support beam using the provided dowels and screws.

Step 3: Secure the side supports using screws.

Step 4: Attach the corner brackets to the underside of the tabletop using screws.

Step 5: Assemble the drawer frame. Connect the sides and front/back panels.

Step 6: Attach the drawer runners to the drawer frame using screws.

Step 7: Insert dowels into the drawer frame.

Step 8: Place the assembled drawer into the table frame.

Step 9: Secure the drawer mechanism with screws.

Step 10: Attach the legs. Insert the threaded bolts into the legs and then screw them into the designated holes on the table frame.

Step 11: Secure the legs using the provided brackets and cam locks.

Step 12: Attach the crossbars to the legs using dowels.

Step 13: Connect the crossbars to the legs using screws and dowels.

Step 14: Attach the remaining crossbars to the legs.

Step 15: Tighten all connections using the provided tool.

Step 16: Slide the drawer into place. Ensure it clicks securely.

Step 17: Attach the drawer front panel using screws.

Step 18: Attach the drawer knob to the drawer front.

Step 19: Attach the drawer handle.

Step 20: Assemble the side panels for the drop-leaf mechanism.

Step 21: Connect the side panels to the table frame.

Step 22: Slide the drop-leaf panel into the assembled side panels.

Step 23: Secure the drop-leaf panel.

Step 24: Attach the drop-leaf support with screws.

Step 25: Attach the drawer knob and handle.

Step 26: Extend the drop-leaf sections.

Step 27: Secure the drop-leaf sections in the extended position.

Final Check: Ensure all screws are tightened and the table is stable. Refer to the diagrams for visual guidance throughout the assembly process.

Care Instructions: Wipe clean with a damp cloth. Avoid harsh chemicals.