NORDVIKEN Extendable Table Assembly Instructions
This document provides assembly instructions for the NORDVIKEN extendable table.
Tools Required
The following tools are recommended for assembly:
- Screwdriver (Phillips head)
- Hammer
Important Safety Information
- Do not use power tools for assembly as they may damage the product.
- Assemble on a soft surface, like a rug, to prevent scratches.
- Ensure all parts are correctly identified before starting assembly.
- If you encounter difficulties, contact IKEA customer support.
Parts List
The following parts are included in the package:
- 18x Screw (164409)
- 4x Dowel (183331, 112996)
- 8x Screw (109548)
- 8x Screw (109546)
- 4x Screw (108530)
- 16x Screw (109021)
- 4x Screw (222925)
- 32x Dowel (101350)
- 4x Cam lock (110530)
- 4x Bracket (122483)
- 2x Screw (100223)
- 4x Connector (110972)
- 4x Dowel (101350)
- 8x Screw (109546)
- 8x Nut (100712)
- 8x Washer (100843)
- 8x Threaded rod (100018)
- 4x Threaded rod (100018)
- 1x Allen key (120202)
- 1x Allen key (100092)
- 16x Screw (109338)
- 4x Hinge (109338)
- 4x Mounting plate (109221)
- 4x Cam lock (110630)
- 2x Support bracket (10003961)
- 2x Support bracket (10003961)
- 4x Foot (10004568, 10005381)
- 4x Foot (10004568, 10005381)
- 4x Base plate (10003975, 10005468)
- 3x Protective pads (108357)
- 4x Screw (157780)
Assembly Steps
- Step 1: Prepare the Legs Attach the leg components using the provided dowels and screws. Ensure correct orientation as per the diagrams.
- Step 2: Assemble the Frame Connect the leg assemblies and crossbars using screws and cam locks.
- Step 3: Attach Support Brackets Secure the support brackets to the frame using screws.
- Step 4: Install Feet Attach the feet to the bottom of the legs.
- Step 5: Connect Tabletop Sections Assemble the tabletop sections, ensuring they are properly aligned.
- Step 6: Attach Tabletop to Frame Carefully place the assembled tabletop onto the frame and secure it using the provided screws.
- Step 7: Extend the Table Follow the diagrams to extend the table by sliding the sections.
- Step 8: Secure Extensions Use the locking mechanism to secure the extended tabletop sections.
- Step 9: Final Touches Apply protective pads to the bottom of the legs if applicable.
Note: Refer to the detailed diagrams provided in the original document for precise placement and orientation of parts.