Introduction
About the Watchmark Ultra
The Watchmark Ultra is a multifunctional smartwatch designed for individuals with an active lifestyle. It features built-in speakers and a microphone, allowing users to answer calls directly from their wrist. The watch also includes 19 sports modes and various health functions.
Device Configuration
Contents of the package:
- Smartwatch (color and material may vary depending on the selected model)
- Charger (color and material may vary depending on the selected model)
- Strap (color and material may vary depending on the selected model)
Hardware Requirements
- iOS 10.0 and above
- Android 5.0 and above
- Supported Bluetooth: 5.1
Compatible operating systems are indicated by text labels: "Android 5.0+" and "iOS 10.0+".
Charging Instructions
This smartwatch utilizes magnetic charging. Connect the charging cable to the USB input and the rear charging pins of the device. Charging will commence automatically once connected, indicated by a charging icon on the screen.
A full charge takes approximately 2 hours. It is advised not to use the watch while it is charging.
Caution: Do not connect the magnetic charging cable to any two pins simultaneously with conductive material, as this may result in a short circuit.
Additional Information
Before using the equipment, carefully read the entire operating manual. It is recommended to use only the original battery, charger, and accessories included with the device. The manufacturer or distributor is not responsible for the use of third-party accessories.
The functions described in this manual are general for smartwatches; specific models may differ from the standard description.
Before first use, charge the device for at least 2 hours. Download and install the companion application, and grant all necessary consents requested by the smartphone. Incomplete consent may limit device functionality. The smartphone will only request access to functions essential for the smartwatch's proper operation.
The company reserves the right to modify the content of this manual.
How to Wear a Smartwatch
Wearing a Watch
The strap for this watch model is 22mm wide and is replaceable. Additional straps are available in different colors and materials.
For general wear, position the smartwatch like a regular watch, approximately one finger above the wrist bone.
To optimize heart rate monitoring during exercise, wear the device slightly higher on the wrist (about 2 fingers above the wrist bone) for enhanced comfort and stability. Activities like cycling or lifting weights can alter the watch's position due to wrist bending. If the watch is worn too low on the wrist bone, measurements may be interrupted, highlighting the importance of correct positioning.
Replacing the Belt
Before using the watch, attach the original strap. Exercise caution and protect your nails when attaching the telescopes to the watch.
Putting on the Belt
- Insert one end of the strap, including the telescope, into the recess of the watch case.
- On the other side, slide the telescope into the recess and attach it to the watch.
Removing the Belt
- On one side, press the circle on the telescope and gently move it inward.
- Pull up until the telescope detaches from the watch.
Apps and Features
Installing the Application
The companion application for the Ultra smartwatch model is "FitCloudPro". It can be downloaded from the Google Play Store or the Apple App Store.
After installation, enable Bluetooth on your phone and open the application. You can create an account or proceed without registration. Complete the required data and authorize access. Providing all requested consents is necessary for the application to function correctly.
To connect the watch, select "Device" and then "Scanning" within the app, and choose the watch model (NX3).
To utilize the smartwatch's calling and receiving functions, connect your watch via Bluetooth. On your phone, go to Bluetooth settings and connect to the device named "BT-85E". On the watch, access the top menu, select the earphone icon, and turn on "Audio mode". Without this connection, certain functions will not be active.
Features Available in the Smartwatch
Time, Date, Day of the Week
The display shows the current time, date, and day of the week on the main screen.
Pedometer
Counts daily steps, resetting at midnight (00:00). Step data is visible in the application or on the first tab of the main screen.
Calories Burned Counter
Calculates the amount of calories burned per day. Calorie burn data can be viewed in the first tab of the home screen or within the application.
Distance Traveled
Provides information on the distance covered during the day. This data is accessible via the first tab on the right of the main screen or within the application.
Adjusting Screen Brightness
Adjusting the screen backlight brightness helps protect your eyes from excessive brightness, especially at night, and conserves the watch's battery. This feature is located in the drop-down menu on the main screen.
Blood Pressure (BP)
Arterial pressure is the force of blood against artery walls during heart contraction and relaxation. The accepted norm for systolic blood pressure is 120 mm Hg, and for diastolic blood pressure, it is 80 mm Hg. The blood pressure measurement function is found in the watch menu under the name "BP".
Saturation (SPO2)
This function reports the level of blood oxygenation. A standard result is between 95% and 100%. A drop in oxygenation levels can be detrimental to health. The saturation measurement function is located in the watch menu under the name "Blood oxygen".
Pulse
Pulse refers to the number of heart muscle beats per minute. The accepted norm is between 60 and 100 beats per minute. An elevated pulse is called tachycardia, and a decreased pulse is called bradycardia; both can be health concerns. The heart rate measurement function is located in the watch menu under the name "Pulse".
*Disclaimer: Health decisions should not be based solely on smartwatch test results. For accurate measurements, users should measure health functions at rest using traditional medical devices and avoid measuring while exercising, smoking, or drinking alcohol. This smartwatch is not a medical device; measurement results are for illustrative purposes only.
"Find Phone" Function
After pairing the device with the application on your phone, you can quickly locate your phone. Selecting the "Find phone" option will cause the phone to vibrate and ring. This function is accessible in the watch menu.
Stopper
This function is used to control and measure short periods of time. It is available in the watch menu.
Minute Timer
The timer allows for countdowns. This function is accessible in the watch menu.
Alarm
To view set alarms, navigate to the menu and select "Alarm". To activate an alarm, use the application. Further details are on page 18.
Sleep Monitor
This feature analyzes sleep patterns, showing the number of hours slept and distinguishing between light and deep sleep phases. The sleep monitoring function is located in the watch menu and on the third tab of the main screen.
Music Control
After connecting the watch to your phone via the application and playing music, you can pause, resume, rewind songs, and adjust the volume. To control music, start playback on your phone, then access the music function on the watch, which is located in the menu.
Monitoring a Woman's Cycle
You can monitor your menstrual cycle using your smartwatch. To use this function, activate it in the application and personalize settings according to your preferences. More information is available on page 20.
Sports Modes
The watch offers 19 sports modes to help control training goals by monitoring steps, heart rate, calories, and distance. Training data can be found in the application after synchronization or in the watch menu under "Physical activity log". In sports mode, parameters like time, calories burned, and heart rate are measured based on the selected function. Sports functions are located in the watch menu. Additional sports modes can be added via the application. More information is on page 20.
Changing the Dial Theme
The watch provides several dial themes to choose from. To change dials, long-press the main screen for approximately 3 seconds. More dials can be downloaded via the app. More information is on page 17.
Weather
After connecting to the application, the watch displays the day's temperature. The weather function is located in the watch menu or on the fourth tab of the main screen. More information is on page 19.
Notifications/Messages
Upon connecting the watch to your phone via the application and Bluetooth, and granting necessary consents, incoming messages and social media notifications will appear on the watch. This function must be enabled in the application settings for notifications to display. More information is on page 17.
Connections
Connecting the watch to your phone via Bluetooth enables making calls from the smartwatch with high sound quality. Once connected, your phone's contacts will be displayed on the watch. To make a call, you can manually enter a number or select from your most frequent contacts.
Frequent Contacts
Access your most frequently dialed contacts on your watch for quick calls. To add contacts, use the application. More information is on page 17.
Do Not Disturb Mode
This mode prevents all notifications from appearing. To enable it, select the moon icon ? from the drop-down menu on the main screen.
Resetting and Settings
Resetting to Factory Settings
A factory reset allows you to restore your watch to its original state, erasing all data and settings. The reset function is located within the settings menu on the watch.
Settings
Within the settings menu, you can:
- Set backlight time and screen brightness
- Set the response time of the G-sensor function
- Set vibration intensity
- Select the main menu style
- Turn on battery saver mode
- Set the watch language
- Set a password
- Restore factory settings
- Turn off the device
Functions Available in the Dedicated Application
Measurement History
The application stores a history of measurements made by the watch. To view your history, select "Home" in the app.
Notifications
The notification function allows you to read the beginning of messages on the smartwatch screen. Notifications can originate from applications like Facebook, Instagram, Skype, and Messenger. To enable this feature, go to "Device" and then select "Notification Settings".
Changing the Dial Theme
Various dial themes are available in the dedicated app. To select watch faces, navigate to "Device" and then "Watch face selection" in the app. Downloading themes requires data or Wi-Fi to be enabled on your phone.
Frequent Contacts
To add contacts, select "Device" and then "Contacts" in the application.
Phone Camera Control
This function allows remote photo-taking using your phone's camera by activating the shutter button via a watch shake. To take a photo, select "Device" and then "Remote Camera". This is useful for taking group photos from a distance.
Find Your Device
Selecting the "Search for watch" function in the application will trigger a vibration alarm on the watch, aiding in its location.
Alarms
To set an alarm on your watch, specify the time and alarm time in the app. Navigate to "Device" and then "Alarms" in the application.
Motion Reminder
The application allows setting hourly reminders. If the watch detects prolonged inactivity, it prompts the user to engage in activity. To enable this feature, select "Device" and then "Inactivity Reminder".
Hydration Reminder
You can set cyclical reminders every 30-180 minutes to prompt you to drink water. To enable this feature, select "Device" and then "Hydration reminder" in the application.
Waking Up the Screen with a Movement of the Wrist (G-Sensor)
To enable or disable turning on the watch screen with a wrist movement, select "Device" in the application and then "Wake up with a wrist movement".
Weather
To display current weather, enable the application's access to your phone's location and activate the weather information function within the application. Go to "Device" and then "Weather Info."
Automatic Heart Rate Monitoring
The application allows setting the frequency for periodic heart rate measurements. Automatic measurements are performed without user intervention. To enable this feature, select "Device" and then "Continuous heart rate monitoring" in the app. Note that enabling automatic measurements reduces battery life.
Additional Sports Modes
In addition to the basic sports modes, you can add more via the application. To do so, select "Device" and then "Sports push".
Monitoring a Woman's Cycle
To activate this function, go to "Profile" and select "Menstrual Calendar". You must grant calendar access. The application offers three options: menstrual cycle, pregnancy preparation cycle, and pregnancy cycle. After entering data, the smartwatch records menstrual cycles and provides reminders for the next due date. To set parameters, go to "Profile" and then "Menstrual Calendar" in the application.
Goals
The app allows setting daily goals for steps taken, distance covered, and calories burned. The watch monitors progress towards these goals. Depending on the chosen watch face, you can track daily achievements. To set goals, go to "Profile" and then "Goal."
Unit Settings
To adjust units for length, mass, and temperature, go to "Profile" and then "Units" in the application.
General Information
Technical Data
IP67 Waterproof: Allows use while washing hands or in rainy conditions.
Battery: 400mAh, modern lithium-polymer battery with high capacity.
Processor: RTL8762DK, an innovative processor with high performance.
Outdoor: Constructed with durable materials and features an easy-to-clean silicone strap.
**The IP67 standard permits water temperatures from +10 to +35 degrees Celsius and immersion up to 1 meter for 30 minutes. The watch is not suitable for hot baths or saunas as it is not steam resistant, nor is it intended for swimming. Its design is focused on supporting user health.
The image displays three variations of the smartwatch, showcasing different strap colors and designs, each showing the time "09:40", date "Wed 04/06", step count "10349", and heart rate "104".
