TONOR UHF Wireless Microphone Instruction Manual

ABOUT THIS MANUAL

Thank you for purchasing TONOR wireless microphone. This manual is intended to help you understand all about this microphone and how to use it. TONOR always strives for the ultimate user experience. All our knowledge and passion for audio technology are incorporated into building microphones with high performance for you. The TONOR microphone is high quality and easy to use to achieve the best user experience.

Enjoy your microphone!

TONOR Team

Package Including

The package includes:

• 1 x Wireless Microphone
• 2 x Microphone Covers
• 1 x Anti-roll Ring

OPERATING ENVIRONMENTS & NOTES

• When using this device, keep it away from water.
• Use the device in a ventilated environment, keep it away from fire.
• Since it's a wireless device, please keep it away from other interfering sources.
• Do not take apart the device.
• Please use the standard power supply; high voltage may damage the device.
• When the battery is low, the mic or receiver will automatically shut down. Please charge it.
• Recommended to use the original charging cable for all charging equipment. Or use a Type-A to Type-C charging cable.
• Not recommended to use equipment while charging.

SPECIFICATIONS

1. Frequency range: 538.1-597.8MHz
2. Channels: 100ch/each channel
3. RF power: 10dBm
4. Frequency response: 40Hz-18kHz
5. T.H.D: ≤0.5%
6. Mic Battery: Lithium battery 14650 3.7V/1100mAh
7. Mic Charging Time: 3-4 hours
8. Mic Battery Life: 10 hours
9. Receiver powered: DC 13.5V, 1000mA
10. Working distance: Up to 80m

MICROPHONE OPERATION INSTRUCTION

1. Volume +: When adjusting the volume, the screen will display from U00 to U16.

2. Volume -: When adjusting the volume, the screen will display from U00 to U16. Note that when the volume is adjusted to U00, it will return to U12 for hearing protection next time it is turned on.

3. Frequency Number: CHA from CH000 to CH099. CHB from CH100 to CH199.

4. Current Frequency

5. Microphone real-time battery level

6. IR Infrared Pairing Window

7. Power Switch with LED Indicator: Press and hold for two seconds to turn on and off the microphone. The power indicator light is always green when the mic is turned on.

8. Wireless Charging Point

STEPS TO PAIR

1. Turn on the microphone and receiver.
2. Recommended Automatic setting: Press and hold the set button for 2 seconds for CHA to automatically search for the best frequency. When the receiver selects the frequency, align the microphone IR window with the receiver IR window within 20cm. Click the set button, and wait for 3 seconds. When the frequencies of the microphone and receiver are consistent, pairing is successful. If unsuccessful, click the set button again and wait 3 seconds to pair again.
3. Optional Manual setting: Click receiver up button 5 or down button 7 to choose the free frequency needed for CHA. Align the CHA IR window with the receiver IR window for CHA within 20cm. Click set button for CHA to pair. When the frequencies of the microphone and receiver are consistent, pairing is successful. If unsuccessful, click the set button again and wait 3 seconds to pair again.
4. Repeat step 2 or 3 for others to finish pairing for CHB.
5. The pairing steps of CHB are the same as CHA. When operating CHB, just follow the buttons on CHB.
6. Multiple sets used together:
   • Make sure all devices are turned off. Then turn on the first set of receivers and pair CHA and CHB according to step 2. Keep the paired microphone and receiver turned on.
   • Later turn on the second set of receivers and repeat step 2, and so on. Please keep paired devices turned on until all devices are paired. It is recommended that up to 6-7 sets be used at the same time.

TROUBLESHOOTING

• Problem: Turn on all the microphones, but one of them has no sound.
• Solution: Reconnect the microphone and receiver according to the STEPS TO PAIR.
• Problem: Received signal with noise or interference.
• Solutions:
  • Change to other frequencies.
  • Check whether the receiving distance exceeds the maximum range.
• Problem: Microphone cannot be turned on.
• Solution: Check whether the microphone is fully charged.

EU Declaration of conformity

RoHS Directive (2011/65/EU)

Hereby, Fujian EastWest Lifewit Technology Co.,LTD declares that the radio equipment type TW790 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: https://www.tonormic.com/pages/eu-declaration-of-conformity

Conditions and restrictions for using frequencies

There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the information for your country at the following address: https://www.tonormic.com/pages/permitted-frequency-bands

WARRANTY

TONOR provides 2 years of after-sales service, free replacement to products that are NOT damaged resulting from accident, alteration, misuse, negligence, or abuse. If exceeding 30 days of Amazon return policy, you can still contact us through our Shopify TONOR-MIC. We will serve you with full sincerity!

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required.

For further details, consult Innovation, Science and Economic Development Canada's Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Wireless Microphones in the I/Bands.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used installed and operated with minimum distance 0mm between the radiator and your body.

Operating Frequency

CHA/100CH

CHB/100CH

Country Codes for Frequency Usage:

AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK(NI)

Contact Information

Website: https://www.tonormic.com

Support Email: support@tonormic.com

Disposal Information

European Union: You are responsible for the proper disposal of all used electrical and electronic equipment at designated collection points. For more information, visit www.quefairedemesdechets.fr.

France: Batteries and accumulators are recyclable. Dispose of them at designated collection points. Visit www.quefairedemesdechets.fr for collection points.

Manufacturer Information

Fujian EastWest Lifewit Technology Co., LTD | RM 1201-1205, BLD 18, 2ND PHASE OF INNOVATION PARK, FUZHOU 350108, CHINA

EASTWEST ELECTRONIC COMMERCE CO US LIMITED | 3500 SOUTH DUPONT HIGHWAY, SUITE G106 DOVER, DE 19901 UNITED STATES

LIFEWIT LIMITED | UNIT 2, VINCENT HOUSE, FIRCROFT WAY, EDENBRIDGE UNITED KINGDOM

Lifewit GmbH | Friedenstraße 5 97072 Wuerzburg Germany

MADE IN CHINA