TONOR TW880 UHF Wireless Microphone

About This Manual

Thank you for purchasing the TONOR wireless microphone. This manual is intended to help you understand all about this microphone and how to use it. TONOR always strives for the ultimate user experience. All our knowledge and passion for audio technology are incorporated into building microphones with high performance for you. The TONOR microphone is high quality and easy to use to achieve the best user experience.

Enjoy your microphone!

TONOR Team

Package Including

The package includes:

• 8 x Microphone
• 1 x Receiver
• 8 x Anti-slip ring
• 8 x Mic cover
• 1 x Charging adapter
• 1 x 6.35mm cable
• 1 x Manual

Specifications

• Frequency Response: 40Hz-18kHz
• Maximum Radio-frequency Power Transmitted: 0.961dBm
• Operating Frequency: A MIC: 538.2-544.8MHz, B MIC: 545.4-552MHz, C MIC: 553.8-560.4MHz, D MIC: 561-567.6MHz, E MIC: 569.4-576MHz, F MIC: 576.6-583.2MHz, G MIC: 585-591.6MHz, H MIC: 592.2-598.8MHz
• Operating Range: Up to 90m
• Frequency Stability: ±10ppm
• SNR: 96dB
• Sound Distortion: 0.03%
• Mic Input Sensitivity: -52dB±3dB
• RF Sensitivity: -95dBm
• Operating Temperature: 0°C to +55°C
• Antenna: Monopole antenna
• Antenna gain: 3dBi

Operating Environments & Notes

• When using this device, keep it away from water. ?
• Use the device in a ventilated environment, keep it away from fire. ?
• Since it's a wireless device, please keep it away from other interfering sources. ?
• Do not take apart the device. ?️
• Please use the standard power supply; high voltage may damage the device. ⚡
• Please place the used batteries into the recycle bin; do not litter them. ♻️

Microphone Operation Instruction

1. Display Screen: Shows current frequency, mute status, and battery level.

2. On/Off Switch: Press to turn on. Long press for 2 seconds to turn off.

3. Tail Tube: Houses the battery compartment.

4. HI-LO Button: Press to switch between high and low power output, or to select channels during pairing.

5. Battery Compartment: Insert 2*AA batteries, ensuring correct polarity.

Note on Mute: Click the power button to mute the microphone; 'MUTE' will appear on the display. Click again to unmute.

Note on Frequency Display: The default frequency is displayed. After 10 seconds, it switches to the corresponding microphone number (e.g., CH A).

INIT Indicator: 'INIT' appears when the microphone and receiver are not locked. This does not affect normal use. For multiple sets, re-pairing is required to avoid interference.

CODE Indicator: 'CODE' appears when the microphone and receiver are locked, preventing interference with other sets.

Receiver Instruction

1. Receiving Antenna: Erect for optimal signal reception.

2. Volume Adjusting Buttons (A-H): Control the volume for each microphone channel.

3. LCD Display Screen (A/B/C/D and E/F/G/H): Displays current frequency, microphone number, volume levels, and signal strength (AF/RF).

4. Power Switch: Long press for 2 seconds to turn the receiver on/off.

When the receiver is powered on and microphones are not installed, the LCD screen will show channel information.

When the receiver is powered on and microphones are installed, the LCD screen will display detailed information for each channel.

Troubleshooting

• No Sound from One Microphone: Reconnect the microphone or bodypack and receiver.
• Noisy or Interfered Signal: Change to other channels or check if the receiving distance exceeds the maximum range.
• Microphone Not Turning On: Check battery installation (polarity) and try new batteries.
• Repeated Microphone Numbers: Turn off the problematic microphone. Press and hold the power button for about 8 seconds until 'CH' appears, then release. Short press the 'HI-LO button' to select a channel (A-H) and short press the power button to confirm.

Note on Switching Mode: Press and hold the power button for 8 seconds to enter the microphone sequence switching mode. The screen will flash 10 times and exit automatically if no operation is performed.

Using Multiple Sets: Pair each set according to the pairing steps. Turn all on and press the HI-LO button on each microphone to set unique frequencies.

Steps to Pair

1. Ensure the receiver is off.
2. Turn off the microphone. Press and hold the HI-LO Button and Power Button simultaneously to enter pairing mode. The microphone screen will flash quickly; release both buttons.
3. Turn on the receiver. Wait 5 seconds. Click the HI/LO button on the handheld microphone until the screen is steady and no longer flashes. The RF light on the receiver should become steady, indicating successful pairing.
4. If pairing multiple microphones, repeat steps 1-3 for each microphone.

Compliance Information

EU Declaration of Conformity

Fujian EastWest Lifewit Technology Co., LTD declares that the radio equipment type TW880 complies with Directive 2014/53/EU (RoHS Directive 2011/65/EU). The full text of the EU declaration of conformity is available at: https://www.tonormic.com/pages/eu-declaration-of-conformity

Conditions and Restrictions for Using Frequencies

Information regarding special conditions and restrictions for using frequencies in your country can be found at: https://www.tonormic.com/pages/permitted-frequency-bands

FCC Statement (US, MX)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Statement (CA)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

FR

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

• (1) L' appareil ne doit pas produire de brouillage;
• (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.

TW880 Frequency List

Frequency List by Region:

Warranty

TONOR provides a 2-year after-sales service, with free replacement for products that are NOT damaged due to accident, alteration, misuse, negligence, or abuse. If exceeding the Amazon return policy (30 days), customers can still contact TONOR via Shopify for assistance.

Shopify Link: https://www.tonormic.com

Email: support@tonormic.com