TONOR

About This Manual

Thank you for purchasing the TONOR wireless microphone. This manual is designed to help users understand all aspects of this microphone and how to use it. TONOR is dedicated to providing the ultimate user experience, incorporating extensive knowledge and passion for audio technology into building high-performance microphones that are high quality and easy to use.

Enjoy your microphone!

— TONOR Team

Package Contents

The package includes:

• Two (2) wireless microphones, each featuring an IR pairing window and an LCD display.
• Two (2) anti-roll rings for the microphones.

(Visual description: An illustration shows two handheld wireless microphones, each with a display screen and an 'IR' label, and two anti-roll rings, indicating 'x2' for quantity.)

Operating Environments & Notes

• Keep the device away from water.
• Use the device in a well-ventilated environment, away from fire.
• As a wireless device, keep it away from other interfering sources.
• Do not disassemble the device.
• Use the standard power supply; high voltage may damage the device.
• When the battery is low, the microphone or receiver will automatically shut down. Please charge it.
• It is recommended to use the original charging cable for all charging equipment, or a Type-A to Type-C charging cable.
• It is not recommended to use the equipment while charging.

Specifications

1. Frequency range: 538.1-597.8MHz
2. Channels: 100 channels per channel (CHA/CHB)
3. RF power: 10dBm
4. Frequency response: 40Hz-18kHz
5. T.H.D: ≤0.5%
6. Mic Battery: Lithium battery 14650 3.7V/1100mAh
7. Mic Charging Time: 3-4 hours
8. Mic Battery Life: 10 hours
9. Receiver powered: DC 13.5V, 1000mA
10. Working distance: Up to 80m

Microphone Operation Instruction

(Visual description: A diagram illustrates two microphones and a receiver. Each microphone has volume up (VOL+) and volume down (VOL-) buttons, an LCD display showing frequency (e.g., CH:000, 538.10MHz), battery level, and an IR window. A power switch with an LED indicator is also visible. The receiver has a wireless charging point.)

1. Volume +: When adjusting the volume, the screen will display from U00 to U16.
2. Volume -: When adjusting the volume, the screen will display from U00 to U16. Note that when the volume is adjusted to U00, it will return to U12 for hearing protection the next time it is turned on.
3. Frequency Number: CHA ranges from CH000 to CH099. CHB ranges from CH100 to CH199.
4. Current Frequency: Displays the current operating frequency.
5. Microphone real-time battery level: Indicates the current battery charge.
6. IR Infrared Pairing Window: Used for infrared pairing with the receiver.
7. Power Switch with LED Indicator: Press and hold for two seconds to turn the microphone on and off. The power indicator light is always green when the microphone is turned on.
8. Wireless Charging Point: Point for wireless charging.

Steps to Pair

1. Turn on both the microphone and receiver.
2. Recommended Automatic Setting: Press and hold the 'set' button for 2 seconds for CHA to automatically search for the best frequency. When the receiver selects a frequency, align the microphone IR window with the receiver IR window within 20cm. Click the 'set' button and wait for 3 seconds. If the frequencies of the microphone and receiver are consistent, pairing is successful. If unsuccessful, click the 'set' button again and wait 3 seconds to pair again.
3. Optional Manual Setting: Click the receiver's 'up' button (5) or 'down' button (7) to choose the desired free frequency for CHA. Align the CHA IR window with the receiver IR window within 20cm. Click the 'set' button for CHA to pair. If the frequencies are consistent, pairing is successful. If unsuccessful, click the 'set' button again and wait 3 seconds to pair again.
4. Repeat step 2 or 3 for CHB to complete its pairing.
5. The pairing steps for CHB are identical to CHA. When operating CHB, simply follow the buttons on CHB.
6. Multiple Sets Used Together: Make sure all devices are turned off. Then, turn on the first set of receivers and pair CHA and CHB according to step 2. Keep the paired microphone and receiver turned on. Subsequently, turn on the second set of receivers and repeat step 2, and so on. Keep paired devices turned on until all devices are paired. It is recommended that up to 6-7 sets be used simultaneously.

Troubleshooting

• One microphone has no sound, but others do:
  • Turn on all microphones.
  • Reconnect the microphone and receiver according to the 'Steps to Pair'.
• Received signal with noise or interference:
  • Change to other frequencies.
  • Check whether the receiving distance exceeds the maximum range.
• Microphone cannot be turned on:
  • Check whether the microphone is fully charged.

EU Declaration of Conformity & RoHS Directive (2011/65/EU)

Fujian EastWest Lifewit Technology Co., LTD declares that the radio equipment type TW550 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: https://www.tonormic.com/pages/eu-declaration-of-conformity

Conditions and Restrictions for Using Frequencies

There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the information for your country at the following address: https://www.tonormic.com/pages/permitted-frequency-bands

Warranty

TONOR provides 2 years of after-sales service, including free replacement for products that are NOT damaged due to accident, alteration, misuse, negligence, or abuse. If the Amazon return policy period (30 days) is exceeded, customers can still contact TONOR-MIC through their Shopify store for assistance. TONOR is committed to serving customers with full sincerity.

FCC Statement

US MX

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

ISED Statement

CA

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

FR

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Important Notes on Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

ISED Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be installed and operated with a minimum distance of 0mm between the radiator and your body.

L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. Cet équipement doit être installé et utilisé avec une distance minimale de 0 mm entre le radiateur et votre corps.

This device operates on a no-interference, no-protection basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. For further details, consult Innovation, Science and Economic Development Canada's Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Wireless Microphones in the TV Bands.

Operating Frequency Tables

CHA/100CH Frequencies

CHB/100CH Frequencies

⚠️ (Warning symbol) This symbol indicates that you are responsible for returning all used electrical and electronic devices to corresponding collection points. For more information, visit: www.quefairedemesdechets.fr

?? (French flag emoji) Les piles et batteries se recyclent. À DÉPOSER EN MAGASIN OU À DÉCHÉTTERIE. Points de collecte sur www.quefairedemesdechets.fr

Country codes for compliance: AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK(NI).