MOEN
Specifications
Description
- Various finishes identified by suffix
- Handheld shower
- 69" double interlock spiral hose (metal)
- Double check valve in handle
- 30" slide bar with push button height selection
Operation
- Single function
- Handshower holder rotates to adjust angle of handshower
Flow
EP suffix models are limited to 2.0 gpm (7.6 L/min) max for products manufactured prior to June 30, 2018. EP suffix models manufactured after June 30, 2018 are limited to 1.75 gpm (6.7 L/min) max.
Standards
- Designed and manufactured to comply with the applicable requirements of ASME A112.18.1/CSA B-125.1 and ASSE 1014 and all applicable specifications referenced therein
- EP suffix models are third party certified to WaterSense®
Warranty
- Lifetime limited warranty against leaks, drips and finish defects to the original homeowner
- 10 year limited warranty when used in a multifamily installation
- 5 year limited warranty when used in a commercial installation
- Visit www.moen.com/support for complete details and limitations
Single Function Handshower w/Slide Bar
Models: 3887 series
The WaterSense® certification indicates that EP Suffix models meet EPA criteria for water efficiency and performance. This certification is provided by IAPMO R&T.
Critical Dimensions
(DO NOT SCALE)
The diagram illustrates the critical dimensions for mounting and installation. The slide bar assembly has an overall height of 30-5/8 inches (778mm). The handshower wand can be adjusted along the slide bar, with its height measured from the bottom of the slide bar being 8-1/4 inches (210mm). For wall mounting, a hole size of 5/8 inches (17mm) is required. The slide bar is designed to accommodate walls with a maximum thickness of 1-1/2 inches. The diagram also indicates a "Finished Wall Line" and notes that a "Drop ell" is sold separately.
Contact Information
For more information, call: 1-800-BUY-MOEN
Visit: www.moen.com