MOEN

Buy it for looks. Buy it for life. ${ }^{\circledR}$

There is more than 1 version of this model. Page down to identify the version you have.

DESCRIPTION

Duralock ${ }^{\text {TM }}$ quick connect installation
Metal construction with various finishes identified by suffix
$1 / 2^{\prime \prime}$ IPS connections
Includes metal pop-up waste assembly

OPERATION

Cross and lever style handles
Maximum handle rotation angle is $90^{\circ}$ to full on for either handle
Hot side counterclockwise to open (clockwise to close)
Cold side clockwise to open (counterclockwise to close)

FLOW

Water usage is limited to these maximum flow rates as indicated by the corresponding product markings
$1.2$ gpm max ($4.5 \mathrm{~L} / \mathrm{min}$) at 60 ps
$1.5$ gpm max ($5.7 \mathrm{~L} / \mathrm{min}$) at 60 ps

CARTRIDGE

$1234^{\text {TM }}$ Duralast ${ }^{\text {TM }}$ cartridge
Nonmetallic, nonferrous and stainless steel material

STANDARDS

Third party certified to WaterSense, ${ }^{\circledR}$ ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein
Certified to NSF 61/9 & 372
Products marked with 1.2 gpm are compliant with California water efficiency regulations
Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
ADA for lever handles

WARRANTY

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
5 year warranty if used in commercial installations

Specifications

The Weymouth ${ }^{\text {TM }}$ Two-Handle Widespread Lavatory Faucet is available in cross handle (Models: TS42114 series) and lever handle (Models: TS42108 series) versions. The valves used are 9000 and 69000 series.

Installation Notes:

This faucet is designed to be installed through 3 holes, with a minimum diameter of 1-1/8".
For deck thickness between 1-1/2" and 3", use service kit #175709.
Valves install through a 1-1/4" diameter hole.

The diagram shows the overall dimensions of the faucet components. The handles are 4" (101mm) from the deck, with the cross handle being 1-1/2" (38mm) wide and the lever handle being 3" (76mm) long. The valve bodies are 2-1/2" (64mm) high. The spout has a height of 5-1/4" (133mm) from the deck to the top of the spout base, and the spout reach is 5-3/4" (146mm). The maximum deck thickness accommodated is 1-1/4" (32mm). The centers for the hot and cold inlets are 8" (203mm) to 18" (406mm) apart.

The faucet is certified by IAPMO R&T to meet EPA WaterSense criteria, indicating water efficiency.

	Moen Weymouth Single Handle Pre-Rinse Spring Pulldown Kitchen Faucet Specifications Detailed specifications for the Moen Weymouth Single Handle Pre-Rinse Spring Pulldown Kitchen Faucet (Model Series S73104EW), covering features, operation, flow, cartridge, standards, warranty, and installation dimensions.
	MOEN Sinema Transitional Beverage Faucet S5535 Series Specifications and Dimensions Detailed specifications, critical dimensions, and warranty information for the MOEN Sinema Transitional Beverage Faucet, Model S5535 Series. Features include lever handle operation, 1.5 GPM flow rate, and Duralast cartridge.
	Moen Waterhill S711 Series Single-Handle Kitchen Faucet Specifications Detailed specifications for the Moen Waterhill Single-Handle Kitchen Faucet, Model S711 series, including features, operation, flow rate, cartridge, standards, warranty, and critical dimensions.
	Moen EVA Two Handle Widespread Lavatory Faucet T6420 Series Specifications Detailed specifications for the Moen EVA Two Handle Widespread Lavatory Faucet, Model T6420 series. Includes information on design, operation, flow rate, cartridge, standards, and warranty.
	Moen S1311 Series 9" Two Function Rainshower Specifications Detailed specifications for the Moen S1311 Series 9-inch two-function rainshower, including features, operation, flow rates, standards, and warranty information. Learn about its metal construction, brass swivel ball assembly, and WaterSense certification.
	Moen Colinet Single Handle Floor Mounted Tub Filler Faucet - Model S44507 Series Detailed specifications and installation information for the Moen Colinet Single Handle Floor Mounted Tub Filler Faucet, Model S44507 series. Features include metal construction, single function handheld shower, 59" double interlock spiral hose, and integral dual check valves. Complies with WaterSense and ASME standards.
	Moen Colinet Single-Handle Lavatory Faucet S44101 Series Specifications Detailed specifications for the Moen Colinet Single-Handle Lavatory Faucet, Model S44101 series, including features, operation, flow rate, cartridge type, standards compliance, and warranty information. Includes critical dimensions for installation.
	MOEN Weylon Single-Handle Kitchen Pullout Faucet 87303 Series Specifications Detailed specifications for the MOEN Weylon Single-Handle Kitchen Pullout Faucet (Model 87303 series), covering faucet description, operation, flow, cartridge, standards, and warranty. Includes critical dimensions and contact information.