Moen CIA™ M-CORE™ 3-Series Valve Trim with Integrated Diverter

Description

Metal construction with various finishes identified by suffix.

Operation

Lever style handle with temperature indicator on the escutcheon.
Variable volume control as handle is lifted in a 0 to 25° arc.
Temperature operates through an 110° arc of handle rotation (full cold to full hot).
Adjustable temperature limit stop to control maximum hot water temperature.
Pressure balancing mechanism maintains selected discharge temperature to ± 2°F.
Transfer valve is rotary 360° handle operation when used with 3 devices, 120° handle operation when used with 2 devices with detents at each flow position.

Cartridge

1213 Ceramic Disk Volume Control Cartridge.
Non-metallic/non-ferrous and plastic material.
Not compatible with back to back installations.

Standards

Third party certified to ASME A112.18.1/CSA B-125-1, ASSE 1016 and all applicable requirements reference therein.
Moen's M-CORE® pressure balance system is capable to meet the pressure and temperature variation requirements of ASSE 1016 when tested as low as 1.5 gpm (5.68 L/min).
ADA for lever handle.

Warranty

Lifetime limited warranty against leaks, drips and finish defects to the original homeowner.
10 year limited warranty when used in a multifamily installation.
5 year limited warranty when used in a commercial installation.
Visit www.moen.com/support for complete details and limitations.

Product Details

Models: UT3331 series

Note: Valves: U232 series and U362 series

Certifications: ADA ?, M-PACT™

Dimensions

Diagram Description: Front view showing a circular escutcheon with two handle openings. The overall width is 6-1/2" (165mm). The vertical dimension from the top to the bottom of the escutcheon is 9-3/8" (128mm). The distance between the centers of the two handle openings is 8-5/8" (219mm).

Finished Wall Line Diagram Description: Side view showing the valve trim installed in a wall. The trim extends 2" (51mm) from the finished wall line. The center of the lower handle connection is 3-1/4" (82mm) from the top of the trim. The center of the upper handle connection is 4-1/4" (108mm) from the top of the trim. The distance between the centers of the two handle connections is 2-1/4" (57mm). The depth of the valve body from the finished wall line is 2-3/4" (70mm).

Critical Dimensions: DO NOT SCALE

	Moen Align M-CORE 3-Series Valve Trim with Integrated Diverter Specifications Detailed specifications for the Moen Align M-CORE 3-Series Valve Trim with Integrated Diverter, including faucet description, operation, cartridge details, standards, warranty information, and critical dimensions.
	Moen 3887 Series Single Function Handshower w/Slide Bar Specifications Detailed specifications for the Moen 3887 series single function handshower with slide bar, including features, flow rates, standards compliance, and warranty information.
	Moen Single Function Handshower w/Slide Bar Specifications Detailed specifications for the Moen 3887 series single function handshower with slide bar, including features, flow rates, standards compliance, warranty information, and critical installation dimensions.
	MOEN Sinema Transitional Beverage Faucet S5535 Series Specifications and Dimensions Detailed specifications, critical dimensions, and warranty information for the MOEN Sinema Transitional Beverage Faucet, Model S5535 Series. Features include lever handle operation, 1.5 GPM flow rate, and Duralast cartridge.
	Moen 63170 LEGEND MOENTROL Single-Handle Tub/Shower Valve Specifications Detailed specifications for the Moen 63170 LEGEND MOENTROL single-handle tub/shower valve, including features, operation, cartridge, standards, warranty, and critical dimensions.
	Moen M-Core™ with Built-in Transfer Valve Installation Instructions Comprehensive installation guide for Moen M-Core™ valves (U232 and U362 series), detailing wall preparation, valve placement, assembly steps, plumbing connections, and warranty information.
	Moen M-Core 1" Handle Extension Kit Installation Guide Installation instructions and warranty information for the Moen M-Core 1" Handle Extension Kit, designed for M-Core tub/shower valves.
	Moen Colinet Single Handle Floor Mounted Tub Filler Faucet - Model S44507 Series Detailed specifications and installation information for the Moen Colinet Single Handle Floor Mounted Tub Filler Faucet, Model S44507 series. Features include metal construction, single function handheld shower, 59" double interlock spiral hose, and integral dual check valves. Complies with WaterSense and ASME standards.