Moen Colinet™ Single Handle Single Riser Floor Mounted Tub Filler Faucet
Description
- Metal construction with various finishes identified by suffix.
- Designed to be installed through a 1, 4-3/4" diameter hole.
- Single function handheld shower.
- 59" double interlock spiral hose (metal).
- Includes integral dual check valves for backflow protection.
Operation
- Pivot action lever style handle.
- Pull diverter to switch between faucet and handshower.
Flow Rate
- Faucet designed to deliver 6 gpm (22.7 L/min) at 45psi.
- Handshower designed to deliver 1.75 gpm (6.6 L/min) at 80psi.
Standards
- Third-party certified to: WaterSense®, ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein.
- ADA compliant for lever handle.
Warranty
- Lifetime limited warranty against leaks, drips, and finish defects to the original homeowner.
- 10-year limited warranty when used in a multifamily installation.
- 5-year limited warranty when used in a commercial installation.
- Visit www.moen.com/support for complete details and limitations.
Specifications
Model: S44507 series
Floor Mount Rough-In Kit: TS50100 (Joist) TS50110 (Concrete)
Critical Dimensions:
The diagram shows the faucet with various measurements. The overall height from the floor to the top of the spout is approximately 29-32" (737-813mm). The spout reach is 11" (280mm) and the height to the spout outlet is 10" (254mm). The faucet requires a minimum of 1" (25mm) clearance above the tub. The rough-in kit dimensions indicate a range of 10-1/2" to 18" (267 to 457mm) from the wall to the center of the pipes. The handheld shower is positioned on the riser, with a distance of 5" (127mm) from the riser to the shower head. The riser itself has a diameter of approximately 2-1/8" (51mm). The base of the faucet on the floor has a diameter of 5-3/8" (127mm). The rough-in hole in the floor is 4-3/4" (121mm) in diameter. The diagram also indicates a WaterSense certification logo.
For more information, call 1-800-BUY-MOEN or visit www.moen.com.