SANDLÖPARE Storage Trunk

Step 1: Preparation and Base Assembly

Review the assembly instructions before starting. [question] If you are unsure about any step, consult the guide.

Dispose of packaging materials responsibly. [information] ?️

Attach the base or frame components as shown in the diagram. This may involve securing parts using a specific method indicated by the arrows.

Step 2: Forming the Trunk Body

Unfold the main body of the storage trunk. [arrow]

Insert or fold any internal dividers or base supports into place. [arrow]

Step 3: Attaching the Lid

Place the lid onto the assembled trunk body. [arrow]

Step 4: Securing the Trunk

Close the lid. Secure any latches or closures as indicated by the diagram. [arrow]

The storage trunk is now ready for use.