KUGGIS

Getting Started

[Note] Please read these instructions carefully before assembly. Ensure you have all parts and tools required.

[Question] If you are unsure about any step, refer to the diagrams or seek assistance.

[Do Not] Do not attempt to force parts together or use incorrect methods.

Step 1: Assemble the Base Frame

Take two side panels. Insert four (4x) dowels/pins into the pre-drilled holes on one panel. Align the second panel and press them together until secure.

Diagram Description: Two side panels are shown being joined. An inset shows four pins being inserted into holes, followed by the panels being pushed together.

Step 2: Attach Another Side Panel

Attach another side panel to the assembled section. Insert one (1x) dowel/pin and press until you hear a [Click] indicating it is secured.

Diagram Description: A third side panel is being attached to the existing structure. An inset shows one pin being inserted and the panel clicking into place.

Step 3: Add Remaining Side Panels

Attach the fourth side panel. Insert four (4x) dowels/pins into the corresponding holes, then insert one (1x) dowel/pin. Press to secure each connection until a [Click] is heard.

Diagram Description: The fourth side panel is being attached. Insets show multiple pins being inserted and securing with a [Click] sound.

Step 4: Attach the Bottom Panel

Attach the bottom panel to the assembled frame. Insert eight (8x) dowels/pins into the designated holes, followed by two (2x) additional dowels/pins. Press to secure each connection until a [Click] is heard.

Diagram Description: The bottom panel is being attached to the frame. Insets show numerous pins being inserted and securing with a [Click] sound.

Step 5: Form the Box and Secure

Carefully fold the structure into the final box shape. Insert nine (9x) dowels/pins into the corner holes. Press down firmly on each corner to secure the structure until a [Click] is heard.

Diagram Description: The partially assembled sides are being folded into a box. An inset shows pins being inserted into corners and a hand pressing down to secure them with a [Click] sound.

Step 6: Place the Lid

Place the lid onto the assembled storage box.

Diagram Description: The lid is shown being placed on top of the completed box.