Genesis Zircon 660 PRO Gaming Mouse - Quick Installation Guide

Product Features

• 6 programmable buttons
• Mechanical switches with a lifespan of up to 80 million presses
• Precise optical sensor with up to 26000 DPI
• Advanced software with macro/profile editor
• Built-in memory
• Triple communication mode (Bluetooth | 2.4GHz | USB)
• Nano receiver storage
• Built-in rechargeable battery

Installation

Connect the included cable to a free USB port on your computer. Allow approximately 15 seconds for the drivers to install completely.

The mouse comes with software for advanced features. Download and install it from www.genesis-zone.com.

1. Open the installation folder.
2. Double-click the setup.exe file.
3. Follow the on-screen instructions to install the program.
4. After successful installation, the software icon will appear on the system tray. Double-click it to access the settings interface.

Connection Modes

Wired Mode

Move the switch on the bottom of the mouse to the USB|OFF position.

Connect the cable to a free USB port on your computer.

Tip: Wired mode allows simultaneous use of the mouse and charging the battery.

Wireless Mode

Pairing a New Device (Bluetooth)

1. Move the switch on the bottom of the mouse to the BT position.
2. Enable Bluetooth on the device you wish to pair with the mouse.
3. Use the channel selection button on the bottom of the mouse to select channel BT1 or BT2.
4. Simultaneously press and hold the left button, scroll wheel, and right button for approximately 5 seconds to enter pairing mode. The LED indicator will flash rapidly.
5. On your device, go to Bluetooth settings and select the "Zircon 660" mouse from the list.
6. Once pairing is successful, the mouse's LED will stop flashing.
7. The mouse is now ready for use.

Connecting to a Previously Paired Device

1. Turn on Bluetooth on the device previously paired with the mouse.
2. Switch the mouse to BT mode or wake it from hibernation.
3. The mouse will automatically connect to the device.

Connecting via USB Receiver

1. Turn on your computer or other compatible device.
2. Move the switch on the bottom of the mouse to the 2.4G position.
3. Connect the receiver to a free USB port on your computer.
4. The operating system will automatically install the necessary drivers.
5. The mouse is ready for use.

Notes:

• The device features intelligent energy management. Press any button to wake the mouse from hibernation (sleep) mode.
• An ON/OFF switch is included to conserve battery power when the mouse is not in use for extended periods.

Tip: For optimal wireless performance and reduced latency, connect the USB receiver as close as possible to the mouse, ensuring no obstructions interfere with the wireless signal.

Functionality

DPI Switch

Briefly press the DPI switch to change the sensor resolution. The LED indicator will flash three times in the previously set color to indicate the selected DPI level, then return to showing the battery level.

Charging the Battery

Connect the included USB-C cable to the mouse.

Plug the USB connector into a suitable power source (max. output DC 5V 0.5A).

During charging, the LED indicator will pulsate in a color corresponding to the battery level.

Note: The DPI indicator will flash when the battery level is critically low.

Caution: If the mouse is not used for an extended period, charge the battery every 3 months. Long-term storage with a low battery level or using chargers exceeding 5V 0.5A may damage the battery.

Battery Level Indicator

Diagram Description

The document includes a diagram of the Genesis Zircon 660 PRO mouse, showing its top view with numbered parts:

• 1. Left Click Button
• 2. Scroll Wheel / Middle Button
• 3. Right Click Button
• 4. Side Button (Forward)
• 5. Side Button (Back)
• 6. DPI Switch Button
• 7. Genesis Logo

The underside of the mouse features a mode selection switch (USB/BT/2.4G) and storage for the Nano receiver. The optical sensor is located on the underside.