ZONDA 9-FX SOFTWARE VERSION HISTORY
| VERSION | RELEASE DATE | DMX CHART | MODIFICATIONS |
| V110 | 14-Mar-22 | V1 | First Release |
| Error Record function added | |||
| Minor bug fix | |||
| sACN improved | |||
| V112 | 27-May-22 | V1 | Tilt range default set to 540° |
| New Vdeo Mapping | |||
| V113 | 30-Jun-22 | V113 | Extended Mode 3 added:
|
Extended Modes 2 & 3 removed:
| |||
| V120 | 31-Oct-22 | V113B | LED Pixels Maps select menu (Gen1 & Gen2) |
| LED Bin info menu added | |||
| Effect synchronisation bug fix | |||
| sACN & ArtNet improvement | |||
| Pan & Tilt speed menu modified | |||
| Unicast function modified | |||
| V121 | 17-Dec-22 | V113B | Chase effects improved |
| Corrected address issue : | |||
| V122 | 16-Mar-23 | V113B |
|
| Optimized Interface to show software version on lower right of Display | |||
Improved the CCT chanel :
| |||
| Added folder channel to store different type of effect | |||
| Improved the consistencies between effect LED and power LED when dimmer off | |||
| Corrected the bug of Chase1 when move the Chase size | |||
| Modified Chase Fade, work with Speed(ch28) and Fade(ch29) | |||
| Fixed the strange behavior on the chase effect when background dimmer at 0 | |||
| Corrected some chase effects | |||
| Corrected background color in PIXLE mode | |||
| Improved the white channel when I pass from 256 to 255 | |||
| Improve color shift problem. | |||
| Increased the maximum playspeed of liquid LED to 800% of the original content speed | |||
| Remove fade time when at default speeds on the liquid effect | |||
| Added Channel 25 to adjust effect background Size | |||
| Improved interaction between Channel 51 and Channel 36, and interaction between different effects | |||
| Improved the Channel 51/cross fade behavior (cross fade between power led and pixel control) | |||
| Added the menu of "Reset From MAC" for IP address | |||
| Basic and Standard modes modified to have same address menu | |||
| Added "Extend Ring" mode | |||
| Removed RDM queued message | |||
| Hide store dimmer enable function. | |||
| Fix a chase issue in channel 36 | |||
| Fix the "DMX output" option | |||
| Fix Liquid effect issue | |||
| Upgrade RDM Code | |||
| Fix Fan issue | |||
| Change default mode to extended pixel | |||
| V123 | 3-Dec-24 | V123 | Fix a flash issue when using strobe, dim out and go to open with the dimmer at 0% |
| Add Tungsten Simulation | |||
| Add Tracking360 | |||
| V124 | 7-Aug-24 | V124 | Add PAN and TILT Option "360SC" |
| Correct the RDM Modele ID "0A86" | |||
| Improve Dimmer in Low level | |||
| V130 | 23-Jun-25 | V130 | Add Function to read and set address, universe and signal via Fixture Manager Software |
| Added C39 options for "set LED BIN" | |||
| V131 | 3-Jul-25 | V130 | Added C39 options for "set LED BIN" |
NOTE: Updating software does not restore factory default settings
