Ayrton Rivale Profile Software Version History
| VERSION | RELEASE DATE | DMX CHART | MODIFICATIONS |
|---|---|---|---|
| V101 | 27-Sep-23 | V1 | First version |
| V102 | 19-Oct-23 | V1 | Adjusted Y alignment angle Fixed some bugs on Esim Improved zoom movement |
| V103 | 2-Nov-23 | V1 | Improved animation course when reset Added temperature protection when rotating and fixed gobos morphing Fixed the bug when reset at "All rotating gobos" mode, it shows gobo and gobo rot error. |
| V104 | 7-Dec-23 | V1 | The menu name "Log Collect" inside the Info menu changed to "Data Collect". Added a Total LED Hours in menu, to advoid the issue RMD reads the hours only for "75-100% dimmer" Added Gobo correction with 17% Cyran |
| V105 | 21-Dec-23 | V1 | Increased a little on CMY rotating range to improve CMY calibration Cancel timer when inside the calibration menus |
| V106 | 22-Dec-23 | V1 | Changed to only need input one time pins for calibration, relock only after reset/restore Improve light output at low DMX value Added "Standard" Mode Added "Clr cmy comp" to Menu Remove the timer when hidden menu Calibration and cmy comp were already unlocked Allowed relock the hidden menu by doing a power cycle |
| V107 | 19-Jan-23 | V107 | Continue to improve light output when at narrow beam and small IRIS & color engaged Display QR code in SN Add a double confirmation layer in clear CMY comp Identify first two letters in SN whether to reduce power when stacking gobo Add SN QR code in special menu Update NFC app Add Defog ON with all Head and Base Fans to maximum and Dimmer to Max and Zoom to Narrow |
| V108 | 28-Feb-24 | V107 | Data Collect reload Off Improved on Focus Slip issue |
| V109 | 11-Mar-24 | V109 | Signal selection inside the DMX addressing Add the RDM QR code Error display only 1 time CTO compensation for Magenta wheel Changing the focus driving to avoid losing steps Add gobo control for RA same as RV Remove all limitation on gobos Remove limitation on single gobo function for Mag version Fix gobo or color wheel mismatch issue |
| V110 | 24-Mar-24 | V109 | CTO compensation for fixed color wheel Magenta Add framing range Change votage in constant fans on mode Fix gobo control "full" issue Modify button function in address page Changed default framing position Fix random movement issue. |
| V111 | 24-May-24 | V109 | Use linear power drop when framing. Adding privacy policy concent in data collect/fixture manager. Adjust current for focus when light head points to 90°. Rectified Issue: Stop rotation by shortcut (CH6/7: 64-127) will no more affect Pan/Tilt movement (Ch1/3) |
| V112 | 31-May-24 | V112 | Modified option in "gobo correction" as ON/OFF instead of CTB/Cyan/OFF Added FS Mode Change defog fan logic. |
| V113 | 24-Jun-24 | V112 | Fix PAN/TILT Flip issue Added quick address setup via NFC |
| V114 | 12-Jul-24 | V114 | Adding Tracking 360 mode Improve Dimming issue on LED when blade not fully in Tilt acceleration curves modified for better and safer movement |
| V115 | 23-Sep-24 | V114 | CMY fade improved Iris fade improved Minor bug fixes |
| V116 | 16-Oct-24 | V114 | Add protection when Pan or Tilt Blocked Add 360SC for Pan and Tilt Degree Option Add 360SC in control Channel |
| V117 | 4-Dec-24 | V117 | Improved Defog Logic Improved Zoom/focus Pan&Tilt repositionning improved Framing Constant mode added New dimmer curve "Linear low" added |
| V118 | 13-Mar-25 | V118 | Add CMY path options, "Shortcut" as default, "Spinout" as option "Photoelectric Encoder" set as default (Restore Factory Settings) Encoder selection (Photoelectric or Magnetic) added in Control channel Continuous Pan & Tilt synchronization issue solved Encoder selection will automaticaly switch to Photoelectric during update |
| V119 | V118 | Spinout out CTO issue solved Improve CMY driving, to correct bug (random flash between colours) Improve iris synchronization (between multiple fixtures) |
|
| V120 | 23-Jun-25 | V118 | Improve PAN/TILT reset process to be more consistent on the positionning Add PAN/TILT Comp in option menu Fixed user mode A/B/C, where channel was not available |
NOTE: Updating software does not restore factory default settings
