Westfalia Tow Bar System for Renault Clio 4 Estate
Model Numbers: 316336600001 (SI 197), 316337600001 (SI 198)
Important Information: Please consult the vehicle's registration document for detailed usage characteristics. This tow bar system, when installed according to our recommendations, will provide complete satisfaction. Westfalia disclaims all responsibility in case of unauthorized modifications or improper use of the product.
Vehicle Compatibility and Technical Specifications
Vehicle: Renault Clio 4 Estate
Functional Type: 7R
| Specification | Details |
|---|---|
| Class and Attachment Type | A50-X |
| Homologation | e24*55R*01*0313 (316336) - e24*55R*01*0314 (316337) |
| D-Value | 7.06 kN |
| Max Vertical Load (S) | 75 kg |
| Towing Capacity | Refer to vehicle registration document |
According to European Directive 94/20, the maximum towing capacity of the tow bar system is determined by the test value "D", calculated as: D = (T x C) / (T + C) x 0.00981 = 7.06 kN, where T is the maximum gross mass of the towing vehicle (in kg) and C is the maximum towing capacity of the towing vehicle (in kg).
General Specifications
- Maximum towing weight: 1200 kg
- Maximum load on the tow ball: 75 kg
- Maximum load for bicycle carriers (3 units): 60 kg
- Maximum load for bicycle carriers (2 units): 30 kg
- Estimated installation time: 60 minutes
Parts List
The following parts are included for the respective models:
Model 316336 600 001 (SI 197)
| Component Group | Part Description | Quantity |
|---|---|---|
| X | HM 10 x 35 Cl 8.8 | 2 |
| M10 Cl10 | 2 | |
| CS 10 | 2 | |
| Y | HM 10 x 35 Cl 8.8 | 2 |
| CS 10 | 2 | |
| W | HM 10 x 100 Cl 10.9 | 4 |
| M10 Cl10 | 4 | |
| CS 10 | 4 | |
| L 10 / 36 x 2 | 4 | |
| 32 / 20 x 10 | 4 | |
| 20 / 10 x 69 | 4 | |
| Z | HM 12 x 65 Cl 8.8 | 2 |
| M12 Cl8 | 2 | |
| CS 12 | 2 | |
| L 12/27 | 1 |
Model 316337 600 001 (SI 198)
| Component Group | Part Description | Quantity |
|---|---|---|
| X | HM 10 x 35 Cl 8.8 | 2 |
| M10 Cl10 | 2 | |
| CS 10 | 2 | |
| Y | HM 10 x 35 Cl 8.8 | 2 |
| CS 10 | 2 | |
| W | HM 10 x 100 Cl 10.9 | 4 |
| M10 Cl10 | 4 | |
| CS 10 | 4 | |
| L 10 / 36 x 2 | 4 | |
| 32 / 20 x 10 | 4 | |
| 20 / 10 x 69 | 4 | |
| Z | HM 12 x 100 Cl 10.9 | 2 |
| M12 Cl10 | 2 | |
| CS 12 | 2 |
Installation Instructions
-
Step 01: Vehicle Preparation
Access the vehicle's rear underside. This may involve removing the rear bumper cover. Tools indicated: Socket wrench (size 24), Screwdriver (size 20).
-
Step 02: Trunk Access
Open the vehicle's trunk and remove the spare tire to gain access to the mounting area.
-
Step 03: Mounting Bracket Placement
Position the main tow bar frame components and side mounting brackets onto the vehicle chassis at the designated points. Arrows in the diagram indicate the correct orientation and insertion points for the components.
-
Step 04: Attaching Side Brackets (L & R)
Secure the left (L) and right (R) side mounting brackets to the vehicle chassis using the specified bolts. Torque specification: M10 - Cl10 bolts tightened to 67 Nm. Tools required: Torque wrench and standard wrenches (sizes 16-17).
-
Step 05: Mounting the Tow Bar Frame
Slide the main tow bar assembly onto the previously attached side brackets. Ensure proper alignment.
-
Step 06: Finalizing Frame Attachment
Secure the main tow bar frame to the side brackets using the provided hardware. Torque specification: M10 - Cl8 bolts tightened to 47 Nm. Tools required: Torque wrench and standard wrenches (sizes 16-17).
-
Step 07: Attaching the Tow Ball
Mount the tow ball assembly onto the tow bar frame. Torque specification: M12 - Cl8 bolts tightened to 81 Nm. Tools required: Torque wrench and standard wrenches (sizes 18-19).
-
Step 08: Electrical Connector Installation
Install the electrical connector housing and any associated wiring components. Torque specification: M12 - Cl10 bolts tightened to 114 Nm. Tools required: Torque wrench and standard wrenches (sizes 18-19).
Declaration of Correct Installation
The undersigned company declares that the tow bar system, model type [Insert Model Type Here], has been installed correctly, adhering to all mounting points and specifications provided by the vehicle manufacturer.
This declaration is made for the vehicle: Clio 4 Estate, License Plate: [Field for License Plate], Date: [Field for Date].
Furthermore, the vehicle user has been informed about the proper USE and MAINTENANCE of the device.
[Placeholder for Company Stamp and Signature]
