NYMÅNE Wall Lamp
By IKEA
Important Safety Information
⚠️ External Cable/Cord Damage: If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their service agent, or a similarly qualified person to avoid hazards. If you are uncertain, please contact IKEA.
⚠️ Fittings: Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.
⚠️ Flexible Cable Attachment: If the flexible cables connected to this luminaire are within reach, they should be carefully and thoroughly attached to the wall to reduce the risk of strangulation.
Assembly Instructions
Follow these steps to assemble your NYMÅNE wall lamp:
Step 1: Prepare the Mounting Bracket
Diagram showing the mounting bracket being attached to the lamp body.
Step 2: Mount the Bracket to the Wall
Diagram illustrating wall mounting. It shows a screw and wall plug, with an example of incorrect usage crossed out. The mounting bracket is then shown being attached to the wall with screws.
Step 3: Attach the Lamp Body
Diagram showing the lamp body being attached to the wall bracket. Close-up views detail the insertion and tightening of screws.
Bulb Replacement
Important: When changing the bulb:
- Use only GU10 LED bulbs.
- Do not use GU10 Halogen bulbs.
Diagram illustrating bulb replacement, showing the removal of an old bulb and the insertion of a new GU10 LED bulb.
Lamp Head Adjustment
The lamp heads can be adjusted to direct light as needed. Diagrams illustrating the adjustment of the lamp heads, showing rotational movement.
