NYMÅNE Floor Lamp

This document provides assembly and usage instructions for the IKEA NYMÅNE floor lamp.

Important Safety Information

Warning: If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or their service agent or a similarly qualified person to avoid a hazard. If you are uncertain, please contact IKEA.

This critical safety instruction regarding cable replacement is provided in multiple languages within the original document to ensure understanding across different regions.

Assembly Instructions

Follow these steps to assemble your NYMÅNE floor lamp:

Diagram 1: Illustrates attaching the lower pole section to the circular base. A hand is shown screwing the pole into the base.

Step 1: Attach Base Pole

Secure the lower pole section to the lamp base by screwing it in place.

Diagram 2: Shows the upper pole section being connected to the lower pole section. A hand is depicted tightening a knob to secure the connection.

Step 2: Connect Upper Pole

Connect the upper pole section to the lower pole section and tighten the securing knob.

Diagram 3: Depicts the lamp arm assembly being attached to the top of the pole. A hand is shown tightening a knob to secure the arm.

Step 3: Attach Lamp Arm

Attach the lamp arm assembly to the top of the pole and secure it using the provided knob.

Bulb Replacement

Important: When changing the bulb, use only a GU10 LED bulb. Do not use GU10 Halogen bulbs.

This instruction is crucial for safety and proper function, and is reiterated in numerous languages in the original document.

Diagram showing a hand inserting a GU10 LED bulb into the lamp socket.

Adjusting the Lamp

The lamp arm and head can be adjusted to direct light as needed.

Diagrams show how to adjust the angle and position of the lamp head and arm using the adjustment knobs. Arrows indicate rotational and tilting movements.

Adjust the lamp head by tilting it [arrow pointing down] and rotating it [arrow indicating rotation].
Further adjustments to the arm's position can be made using the knobs [arrows indicating rotation].
The lamp head can be rotated in a full circle [arrows indicating circular motion].

	NYMÅNE Wall/Reading Lamp Assembly and Safety Instructions \| IKEA Detailed assembly instructions, safety warnings, and usage guidelines for the IKEA NYMÅNE wall and reading lamp. Learn how to install, replace the bulb, and ensure safe operation. Includes FCC compliance information.
	IKEA NYMÅNE Installation Guide This document provides installation instructions for the IKEA NYMÅNE wall/reading lamp. It includes safety precautions, assembly steps, and important information regarding bulb replacement.
	IKEA NYMÅNE Lamp: Assembly and Safety Guide Detailed assembly instructions and essential safety information for the IKEA NYMÅNE lamp, covering polarized plug safety, mounting, bulb replacement, and usage. Includes multilingual safety warnings.
	ANTIFONI Floor Lamp - Assembly and Usage Guide Concise guide for the IKEA ANTIFONI floor lamp, covering essential safety warnings about the power cord, assembly steps, and bulb replacement instructions using GU10 LED bulbs.
	IKEA HEKTOGRAM Floor Uplighter and Reading Lamp Assembly Instructions Step-by-step assembly instructions and safety guidelines for the IKEA HEKTOGRAM floor uplighter and reading lamp. Learn how to assemble, replace the bulb, and use the product safely.
	IKEA ISJAKT Floor Lamp Assembly Instructions Step-by-step assembly guide for the IKEA ISJAKT LED floor and reading lamp. Includes safety information and detailed descriptions of assembly steps.
	VÅGHÖJD LED Floor Lamp Assembly Instructions Assembly instructions and safety information for the IKEA VÅGHÖJD LED floor lamp, covering cable and light source replacement.
	NYMÅNE Wall Lamp Assembly and Safety Guide Comprehensive guide for assembling and safely installing the IKEA NYMÅNE wall lamp. Includes instructions on cable management, wall mounting, and replacing bulbs with GU10 LED types.