Monster X6 All-in-One PA Speaker
Quick Start Guide
For complete operational guidelines, please refer to your user manual.
Bluetooth® Pair Audio Device
Set the unit source to Bluetooth®.
Long press the BT Button for 2 seconds to enter into pairing status. Refer to the Controls section for button locations.
Select "MONSTER X6" from your Bluetooth® enabled audio device.
The unit will announce "Connected," when successfully paired.
The blue Bluetooth® indicator light will remain on.
Use the Play Button to play or pause audio.
TWS (True Wireless System) Dual Pairing
(Both unit A and B need to be in close proximity to each other)
Long press the TWS Button to enter into pairing status. The Bluetooth® indicator LED will alternate flashing blue and red.
Press and hold the TWS Button of unit A to enter TWS searching mode while unit B is set to Bluetooth® pairing mode.
The unit A (TX) Bluetooth® indicator LED will light up purple when connected, while the indicator LED for unit B (RX) will be solid red. The unit will announce, "Synchronized."
DISCONNECT: Short press the TWS button.
Controls
The control panel features various buttons and indicators for operating the speaker. Specific button functions include playback control, Bluetooth pairing, TWS pairing, and lighting adjustments.
Diagram Description: The control panel image shows a central display screen surrounded by several buttons for playback, mode selection, volume, and lighting control.
Lighting
Short press the LIGHTING button to cycle through the available light modes. The LED display will indicate the mode number, such as "L01, L02, L03... OFF."
Available light modes include: DANCE, SPIN, SWIRL, DYNAMIC, FOLLOW, SPARK, SUNSET, MOOD, PACE, RED, GREEN, BLUE, AMBER, PURPLE, TEAL, and OFF.
Note: Only the following modes work with FM Radio audio sources: RED, GREEN, BLUE, AMBER, PURPLE, TEAL, and OFF.
DANCE LIGHT MODES: High frequencies are displayed on the top light bar, low frequencies on the four side light bars, and mid-range frequencies on the light ring around the subwoofer.
LIGHTS OFF: Long press the LIGHTING button.
Speaker Diagram Description
The speaker unit features several illuminated elements:
- A: Indicates the top section, likely a port or handle.
- B: Refers to the vertical light bars located on the sides of the speaker.
- C: Highlights the circular light ring surrounding the main subwoofer, as well as the front speaker grille.
