Monster DNA MAX Bluetooth Speaker User Manual and Specifications
Your guide to operating and understanding the Monster DNA MAX portable Bluetooth speaker.
Speaker Function Operation
Buttons and Controls
- [Power Button]: Press once: answer/end call, play/pause. Press and hold for 2s: power on/off, call reject.
- [Volume Up/Next Track Button]: Press once: volume up. Press and hold for 2s: next track.
- [Volume Down/Previous Track Button]: Press once: volume down. Press and hold for 2s: previous track.
- [Monster Share™ Party Mode Button]: Press and hold 2s: set as transmitting speaker. Press once: set as receiving speaker. Connect up to 99 Monster DNA Speakers.
- [Bluetooth Pairing Button]: Press and hold for 2s: Bluetooth pairing.
Ports and Indicators
- [USB-C Charging Port]: For charging the speaker.
- [Battery Level Indication]: Press and hold "-" and "+" buttons for 1s to check battery level.
Visual Description of Speaker Layout
The speaker features a cylindrical design with controls located on the top surface. The top panel includes the [LED Ring], [Power Button], [Volume Up/Next Track Button], [Volume Down/Previous Track Button], and [Monster Share™ Party Mode Button]. The side panel features the [Bluetooth Pairing Button] and the [USB-C Charging Port]. The included [Wireless Charging Base] has a [Charging Base LED Indicator] and connects to a power source.
Pairing Instructions
First-Time Pairing
- Press and hold the [Power Button] for approximately 2 seconds to turn on the speaker.
- The speaker automatically enters pairing mode, indicated by the [LED Ring] flashing blue in a clockwise motion.
- Activate Bluetooth on your device and search for "Monster DNA MAX" speaker.
- Upon successful connection, the [LED Ring] lights up blue for 3 seconds, then turns off.
Manual Pairing
- After powering on, the speaker attempts to connect to the last connected device.
- To pair a new device, press and hold the [Bluetooth Pairing Button] for 2 seconds. The [LED Ring] will flash blue clockwise.
- Activate Bluetooth on your device and search for "Monster DNA MAX" speaker.
- Short press the [Bluetooth Pairing Button] again to disconnect.
Modes and Charging
Bluetooth Mode Operations
- Volume: Press [Volume +/- Button] once for volume up/down.
- Track Control: Press and hold [Volume +/- Button] for 2 seconds for next/previous track.
- Music Playback: Press [Power Button] once to start/pause music.
- Call Management: Press [Power Button] once to answer or end a call. Press and hold [Power Button] for 2 seconds to reject an incoming call.
USB and Wireless Charging
- USB-C Charging: Connect the included USB-C cable to the speaker's [USB-C Charging Port] and plug into a USB power source (e.g., wall adapter).
- Wireless Charging: Connect the [Wireless Charging Base] to a wall adapter and place the speaker directly on it.
- During charging, the [LED Ring] will 'breathe' with a white glow.
- Once fully charged, the [LED Ring] displays a solid white light for 5 seconds before turning off.
Charging Out (Reverse Charging)
Connect your device (e.g., a smartphone) to the speaker's [Charging Port] to initiate charging automatically.
Monster Share™ Party Mode
- Turn on all Monster DNA speakers intended for connection by pressing and holding the [Power Button] for 2 seconds.
- Connect to one Monster DNA speaker via Bluetooth. Then, press and hold the [Monster Share™ Party Mode Button] for 2 seconds to designate it as the main transmitting speaker. A flashing purple light indicates Party Mode transmission is in pairing mode.
- Single press the [Monster Share™ Party Mode Button] on all other speakers to set them as receiving speakers. A green light will flash in a circle during pairing and turn solid green once paired.
- If speakers are not paired within 30 seconds, the 'Monster Share™ Party Mode' pairing will time out. Restart the process to connect additional speakers.
- Press the [Monster Share™ Party Mode Button] again to exit Party Mode.
*Monster Share™ Party Mode is compatible with speakers enabled with Monster Share™ technology.
Auto Power Off
The speaker will automatically turn off after 15 minutes of inactivity (no connection or idling).
Product Specifications
- IP67-Rating: Waterproof, dust-proof, floats in water.
- Power: Up to 20 hours of battery life.
- Charge Time: 5 hours (5V/2A).
- Music Share: Supports sharing music to multiple speakers without requiring an application.
- Mobile Range: Up to 45 meters (150 ft).
- THD: ≤ 1%.
- Battery: 7.4V / 5000mAh (18650type).
- Output Charge: 5V / 2.4A.
- Charging Coil: Wireless Qi charging coil.
- Charging Port: USB Type-C™.
Package Includes
- (1) Wireless Speaker
- (1) Qi Charger (not IP67 rated)
- (1) USB Cable
- User Manual
Safety and Compliance
Charging: This Bluetooth device must be charged using the supplied charging unit only.
Battery Caution: The batteries in this product are not replaceable. Avoid exposing the battery to extremely low or high temperatures, or low air pressure at high altitudes, as this could result in an explosion or leakage of flammable liquid or gas. Dispose of the unit responsibly; do not dispose of in fire, ovens, or by crushing or cutting, as this could cause an explosion.
Warning: Do not dispose of the unit in fire or water. Never attempt to disassemble or reassemble. Recycle waste electrical products according to local authority advice. Keep the device and accessories out of reach of children and animals. Small parts may cause choking or serious injury if swallowed. Avoid exposing the device to temperatures below 0°C or above 45°C, as extreme temperatures can deform the device and reduce charging capacity and lifespan. Do not allow the device to get wet, as liquids can cause serious damage. Do not handle the device with wet hands.
Trademarks: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. iPhone, iPad, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for wireless power chargers. These limits are designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to try correcting it by reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer or technician.
Caution: Modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the product.
FCC Radiation Exposure: This equipment complies with FCC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and the user's body. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
California Proposition 65 Warning: WARNING: Cancer and Reproductive Harm - visit www.P65Warnings.ca.gov.
Manufacturing Information: Made in China - Model: 2MNBD1116. Manufactured, marketed, and distributed by Lifeworks Technology Group LLC.
Website and Support: For more information, visit www.monsterforever.com. For support, contact support@monsterforever.com.