Product Overview
The Monster MS32103 package includes:
- Speaker Unit
- USB-C Charging Cable
- Quick Start Guide & Warranty Letter
Speaker Controls and Ports
The speaker features various controls and ports for easy operation:
- Power On/Off Button
- Multi Function Button (MFB) - Used for pairing, music play/pause, and call management.
- Volume Control "+" Button - Increases volume and skips to the next track.
- Volume Control "-" Button - Decreases volume and skips to the previous track.
- Function Indicator - LED light indicating status.
- Microphone
- USB-C Charging port
Power and Charging
For optimal performance, the speaker should be fully charged before initial use. The package includes a USB-C charging cable, designed for charging only (no data transfer). It connects to a computer USB output or other standard USB compatible charging devices. Charging requires a 5V 1A or above power adapter (not included).
Caution:
- Only use a computer USB output or a standard 5-volt power adapter for charging.
- Damage may occur if a non-standard USB power adapter is used.
- Do not charge if the connector or device is wet or damaged.
Operation Instructions
Power On/Off
- Power On: Press and hold the Power On/Off Button for approximately 2 seconds. An opening tone will be heard.
- Power Off: Press and hold the Power On/Off Button for approximately 2 seconds again. A shutdown tone will be heard.
- Auto-Off Caution: If no Bluetooth device is connected, the speaker will automatically turn off within about 15 minutes.
Pairing
- Upon first unboxing and powering on, the speaker automatically enters pairing mode.
- To disconnect a connected Bluetooth device and pair a new one, press and hold the MFB for about 2 seconds.
- If the speaker does not connect to any Bluetooth device, it will automatically enter pairing mode.
- To pair, enable Bluetooth on the mobile phone, search for Monster devices, and connect. A tone will confirm successful connection, and the white LED indicator will change from breathing to off.
Volume Control
Short press the Volume "+" or "-" Button to adjust the volume up or down.
Music Playback
- Play/Pause: In music playback mode, press the MFB.
- Track Forward: In music playback mode, press and hold the Volume "+" Button for 2 seconds.
- Track Backward: In music playback mode, press and hold the Volume "-" Button for 2 seconds.
Call Management
- Answer Incoming Call: Short press the multifunction key.
- Reject Call: Press and hold the multifunction key for about 2 seconds.
- End Call: Short press the multifunction key.
Voice Control
When the speaker is connected to a phone, double-click the multi-function button to enable or disable the voice assistant.
Advanced Settings
Power Saving Setting
If the speaker is turned on but not connected to a Bluetooth device, it will automatically power off after 15 minutes to conserve energy.
Reset Paired Device List
After powering on, simultaneously press the Volume "+" and Volume "-" Buttons for about 3 seconds to reset the list of paired devices.
LED Indicator Guide
| Status | Description | Voice/Tone |
|---|
| Power On | White LED stays on about 1 second | Opening Tone |
| Power Off | LED off | "Goodbye" |
| Pairing | White LED breathing | "Discovering" |
| Bluetooth connected | LED off | "Your device is connected" |
| Bluetooth playback | LED off | - |
| Battery low | - | "Battery low" |
| Charging | Red LED lights when charging, turns off after fully charged | - |
Battery Use Caution
- Fully charge the speaker before use.
- It is not recommended to replace the battery privately.
- The battery (battery pack or battery pack combination) must not be exposed to sunshine, fire, or similar overheated environments.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
FCC ID: 2AVD2-MS32103
