Stanley CH18 Underwater Chipping Hammer
Product Overview
The Stanley CH18311 Chipper is a compact, hydraulic-powered underwater chipping hammer designed for medium chipping tasks on concrete, masonry, and rock.
[Image Description: The Stanley CH18 Underwater Chipping Hammer is depicted. It is predominantly yellow with black grips on the handle and black hydraulic hoses. The tool features an ergonomic "D" handle with an integrated trigger for safe operation. The product is painted in a hi-visibility yellow.]
The ergonomic "D" handle with its inside trigger is designed to prevent accidental operation. The handle is coated with Plastisol for enhanced comfort for the user. The CH18 features a slide latch design for the tool bit retainer, which accepts standard .580 hex shank, round collar tool bits. The tool is finished in a hi-visibility yellow.
Specifications
| Steel Capacity | .580 Hex Shank, Round Collar Tool Bits |
|---|---|
| Handle Type | "D" Handle, with Inside Trigger |
| Circuit Type | Open Center |
| Flow Range | 7-9 gpm / 26-34 lpm |
| Optimum Flow | 8 gpm / 30 lpm |
| Working Pressure | 1500-2000 psi / 105-140 bar |
| Full Relief Setting | 2250 psi / 155 bar |
| Weight (less tool bit) | 18.2 lbs / 8.2 kg |
| Length | 20" / 51 cm |
| Hydraulic Ports | 7/16 SAE O-ring |
| Couplers | No (See Accessories) |
| Hose Whips | Yes (3/8" NPT Male thread) |
Features
- Ergonomic "D" handle with inside trigger
- Stainless Steel spool and fasteners
- Handle is Plastisol coated for diver comfort
- Uses standard .580 hex shank, round collar tool bits
- High power to weight ratio
- Operates in any position
Ordering Information
Part Number
CH18311: Chipping Hammer, Underwater, .580 Hex Shank, Round Collar, Slide Retainer, less couplers
Accessories
| Part Number | Description |
|---|---|
| 03971 | Flush-Face Coupling Set, ½" NPT |
| 03974 | Flush-Face Coupling Set, ½" NPT |
| 31848 | Dual Hose, 50' x ½", with couplers |
| 31972 | Dual Hose, 25' x ½", with couplers |
| 58633 | Twinned Hose, 25' x ½", with couplers |
| 58634 | Twinned Hose, 50' x ½", with couplers |
| 02278 | Flat Chisel, 1" x 18", .580 Hex Shank, Round Collar |
| 02279 | Bull Point, 1" x 18", .580 Hex Shank, Round Collar |
| 03690 | Chisel Bit, 1" x 9", .580 Hex Shank, Round Collar |
| 03963 | Chisel Bit, 2" x 5", .580 Hex Shank, Round Collar |
When hydraulic hose exceeds 100' (30.4 m) in length, it is recommended to increase the inside diameter (I.D.) of both the pressure and return hose. For more information, consult Stanley Hydraulic Tools.
Important Information
To complete a Product Warranty Recording form and find information regarding your warranty, please visit stanleyhydraulic.com and navigate to the Warranty section.
[Image Description: A screenshot of the Stanley Hydraulic Underwater Tools website is shown. The page features a background image related to underwater work and the slogan "Make Something Great™". Visible navigation links include "NEWSROOM", "WHAT'S NEW", "COMPANY INFO", "CONTACT US", "FEEDBACK", and "WARRANTY". A prominent button reads "> GO TO UNDERWATER PAGE". A red arrow is pointing to the "WARRANTY" link on the navigation bar.]
Please note that the warranty recording form must be submitted to validate the warranty.
Stanley Hydraulic Tools, its parts, accessories, and allied equipment are subject to design improvements, specification changes, and price adjustments at any time without prior notice and without obligation for units already sold. Weights, dimensions, and operating specifications listed herein are subject to change without notice. For applications where specifications are critical, please consult Stanley Hydraulic Tools.
Stanley Hydraulic Tools | 3810 SE Naef Road | Milwaukie, Oregon 97267 | +01.503.659.5660 | 800.972.2647 | www.stanleyhydraulic.com
