The Stanley CH18311 Chipper is a compact, hydraulic-powered, underwater chipping hammer used for medium chipping of concrete, masonry, and rock.
The ergonomic "D" handle with inside trigger prevents accidental operation of the tool. The handle is Plastisol coated for diver comfort. The CH18 has a slide latch design tool bit retainer that will accept .580 hex shank, round collar tool bits. Painted hi-visibility yellow.
[Image Description: A yellow, heavy-duty hydraulic chipping hammer with a distinctive "D" shaped handle, connected to hydraulic hoses.]
Specifications
| Category | Details |
|---|---|
| Steel Capacity | .580 Hex Shank, Round Collar Tool Bits |
| Handle Type | "D" Handle, with Inside Trigger |
| Circuit Type | Open Center |
| Flow Range | 7-9 gpm / 26-34 lpm |
| Optimum Flow | 8 gpm / 30 lpm |
| Working Pressure | 1500-2000 psi / 105-140 bar |
| Full Relief Setting | 2250 psi / 155 bar |
| Weight (less tool bit) | 18.2 lbs / 8.2 kg |
| Length | 20" / 51 cm |
| Hydraulic Ports | -6 SAE O-ring |
| Couplers | No (See Accessories) |
| Hose Whips | Yes (3/8" NPT Male thread) |
Features
- Ergonomic "D" handle with inside trigger
- Stainless Steel spool and fasteners
- Handle is Plastisol coated for diver comfort
- Uses standard .580 hex shank, round collar tool bits
- High power to weight ratio
- Operates in any position
Ordering Information
Part Number
CH18311: Chipping Hammer, Underwater, .580 Hex Shank, Round Collar, Slide Retainer, less couplers
Accessories
- 03971: Flush-Face Coupling Set, 3/8" NPT
- 03974: Flush-Face Coupling Set, 3/8" NPT
- 31848: Dual Hose, 50' x 1/2", with couplers
- 31972: Dual Hose, 25' x 1/2", with couplers
- 58633: Twinned Hose, 25' x 1/2", with couplers
- 58634: Twinned Hose, 50' x 1/2", with couplers
- 02278: Flat Chisel, 1" x 18", .580 Hex Shank, Round Collar
- 02279: Bull Point, 1" x 18", .580 Hex Shank, Round Collar
- 03690: Chisel Bit, 1" x 9", .580 Hex Shank, Round Collar
- 03963: Chisel Bit, 2" x 5", .580 Hex Shank, Round Collar
When hydraulic hose exceeds 100' (30.4 m) in length, increase I.D. of both pressure and return hose. For more information, consult Stanley Hydraulic Tools.
Important Information
To fill out a Product Warranty Recording form and for information on your warranty, visit stanleyhydraulic.com and select the Warranty tab. The warranty recording form must be submitted to validate the warranty.
