USER MANUAL

Cleaning

To maintain the surface finish of your product, wipe clean regularly, using a clean damp cloth and dry cloth to polish. Do not use abrasive cleaning agents or materials on the product surface as you may invalidate your guarantee. Should any harsh chemicals come into contact with the surface of the product during bathroom cleaning, rinse off immediately, wipe clean and dry.

Congratulations on your purchase

Thank you for choosing Better Bathrooms. Please read this manual before installing your product and keep for future reference.

And welcome to our growing gang of savvy shoppers. We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.

As one of the UK's largest independent bathroom stores, we've received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100. We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

• log in to your account and contact our customer services team via your self-serve portal - betterbathrooms.com/CustomerAccount/Login
• contact us via betterbathrooms.com/content/contact-us

Product Details

Product name: Wave Wall Mounted Basin Mixer-Matte Black

Product Codes: BeBa-13156, BeBa-13157, BeBa-11061, BeBa-10720, BeBa-26720, BeBa-26722, BeBa-11060, BeBa-10722, BeBa-26711, BeBa-27761, BeBa-26714, BeBa-26716

Product Images: The document displays a range of wall-mounted basin mixers in various styles, including straight spouts, curved spouts, and different handle designs, all presented in a matte black finish.

Important Information

Please read these instructions thoroughly and retain for future reference

• Pressures should meet minimum stated on the website
• Pressures must be balanced for optimum performance
• Always check for pipes and cables before drilling
• System must be flushed through prior to installation

Flow Rate

Installation

Note: Before starting the installation of a new mixer, turn off water supply. HOT supply to the left and COLD supply to right.

1. Determine the fixing position and prepare recess for the faucet body. Make the recess in the wall according to the dimension of the faucet body, the recess should be approximately 190mm x 45mm. The faucet body should be fitted below the finished surface to allow the cover plate to fit correctly and flush against the wall.

   Figure B: Illustrates preparing the wall recess and positioning the faucet body.

2. Position the faucet body in place and mark through the pre-drilled screw holes on the body, then drill the marked points before inserting wall plugs into the wall holes.

   Figure C: Shows marking and drilling points for wall plugs.

3. Connect the pipe supplies as shown in Figure B, then check for leaks before fitting plate. Once checked, turn off water supply.

   Figure B (referenced again): Illustrates pipe connections.

4. Apply silicone to the back of the cover plate as shown in Figure D and leave to dry for 24 hours.

   Figure D: Depicts applying silicone sealant to the cover plate.

5. Fit handle and spout using the screws provided.

   Figure E: Shows fitting the handle and spout.

6. Installation is complete, turn on water supply.

   Figure F: Indicates the final step of turning on the water supply.

Tools Required

• Spanner, Hammer, Screw Driver, PTFE etc.

Screws and plugs supplied are for masonry only; for any other structure, a suitable plug and screw must be used.

Parts / Diagrams

Figure A: This diagram shows the assembly of the wall-mounted basin mixer. It labels the following components: Fixing Kit, Faucet body, Cover plate, Spout, Lever handle, and Tails (hot and cold water inlets).

The diagram also indicates dimensions for the tails, showing G1/2 connection, minimum/maximum lengths (e.g., 27Min-40Max), and overall lengths (e.g., 180mm, 200mm, 243mm, 255mm).

Contents / Dimension Drawings

The document includes dimension drawings for various models, referencing specific product codes:

• BeBa-13156, BeBa-13157, BeBa-26720, BeBa-26722, BeBa-26711, BeBa-27761
• BeBa-11061, BeBa-10720, BeBa-11060, BeBa-10722, BeBa-26714, BeBa-26716

These drawings provide detailed measurements for installation, including recess dimensions (e.g., 190mm x 45mm), pipe connection sizes (G1/2), and overall product dimensions.