8BitDo Ultimate Wired Controller for Xbox - Instruction Manual

Brand: 8BitDo

Controller Layout

The controller features a standard layout with two analog sticks, a D-pad, face buttons (A, B, X, Y), shoulder buttons (LB, RB), triggers (LT, RT), menu, view, share, and profile buttons. It also includes a 3.5mm audio jack and a microphone mute switch. The controller has a white status LED and a profile LED.

Key Components:

D-pad: Directional input
Left Stick (LSB): Analog input
Right Stick (RSB): Analog input
Face Buttons: A, B, X, Y for actions
Shoulder Buttons: LB, RB
Triggers: LT, RT
Menu Button: Access game menus
View Button: View in-game information
Share Button: Capture and share gameplay
Profile Button: Cycle through profiles
3.5mm Audio Jack: For headset connection
Microphone Mute Switch: Mute/unmute microphone
Status LED: Indicates connection status
Profile LED: Indicates active profile

Connectivity

Xbox Series X / Xbox Series S / Xbox One

Connect the controller to your Xbox console using the provided USB cable. The status LED will turn solid when the connection is established and the controller is ready for use.

Windows 10

Connect the controller to your Windows 10 device via its USB cable. The status LED will turn solid when the connection is established. A minimum system requirement of Windows 10 version 1903 or above is needed.

Button Mapping

The controller allows for quick button swapping for temporary remapping. For permanent customization, use the 8BitDo Ultimate Software.

Press and hold any two of the following buttons: A, B, X, Y, LB, RB, LSB, RSB.
Press the Star button to swap the selected buttons. The profile LED will blink to confirm the swap.
To cancel the swap, press and hold the swapped buttons again and then press the Star button. The button mapping will revert to default when the controller is turned off.

Note: Button mapping resets to default upon controller power off. For persistent changes, use the Ultimate Software.

Volume Control

Adjust in-game volume and voice chat balance using button combinations.

In-game Volume: Press and hold the Profile button + Up/Down directional buttons to increase/decrease in-game volume. A beep indicates maximum/minimum volume.
Voice/Game Volume Balance: Press and hold the Profile button + Left/Right directional buttons to adjust the balance. Pressing Left increases game volume while decreasing voice chat volume. Pressing Right decreases game volume while increasing voice chat volume. A vibration indicates the middle (default) value.

Ultimate Software

The 8BitDo Ultimate Software provides advanced customization options for your controller, including button mapping, stick and trigger sensitivity adjustments, and vibration control.

Visit app.8bitdo.com to download and use the software. The profile LED lights up when a profile is enabled.

Support

For further information and additional support, please visit support.8bitdo.com.

	8BitDo Ultimate Wired Controller for Xbox - Instruction Manual This manual provides instructions for the 8BitDo Ultimate Wired Controller for Xbox, covering connectivity, button mapping, volume control, and software customization for Xbox Series X/S, Xbox One, and Windows 10.
	8BitDo Pro 2 Wired Controller for Xbox: Instruction Manual & Features Comprehensive guide to the 8BitDo Pro 2 Wired Controller for Xbox, covering connectivity, button mapping, volume control, and software customization. Learn how to enhance your gaming experience with detailed instructions.
	8BitDo Ultimate C Wired Controller for Xbox - User Manual Detailed user guide for the 8BitDo Ultimate C Wired Controller for Xbox, covering button functions, connectivity, features, and troubleshooting for an optimal gaming experience.
	8BitDo Ultimate 3-mode Controller for Xbox: User Manual & Guide Comprehensive guide to the 8BitDo Ultimate 3-mode Controller for Xbox, covering features, connectivity (Bluetooth, 2.4GHz, USB), button layout, software customization, and setup for Xbox, PC, Android, and Switch.
	8BitDo Retro Receiver for NGC: Instruction Manual & Compatibility Guide A comprehensive guide to connecting various 8BitDo controllers and other compatible gamepads to your Nintendo GameCube or Windows PC using the 8BitDo Retro Receiver for NGC. Includes detailed pairing instructions and button layouts for numerous controllers.
	8BitDo M30 Wired Controller for Xbox: Setup and Usage Guide Comprehensive guide for the 8BitDo M30 Wired Controller for Xbox, covering setup for Xbox consoles and Windows PCs, volume control, safety warnings, and software features.
	8BitDo Ultimate Mini Wired Controller for Xbox - Official User Manual Comprehensive user manual for the 8BitDo Ultimate Mini Wired Controller for Xbox. Learn about connectivity, features like customizable light effects, brightness, and speed control, plus important safety information.
	8BitDo Pro 2 Wired Controller for Xbox - Instruction Manual Official instruction manual for the 8BitDo Pro 2 Wired Controller for Xbox, detailing setup, connectivity, button mapping, volume control, software, and safety warnings.