8BitDo Retro Receiver for NGC - Instruction Manual

8BitDo Mod Kit for Original NGC Controller

1. With the controller off, press and hold B+START buttons for 3 seconds to enter its pairing mode, the Status LED blinks rapidly. (This is required for the very first time only)

2. Connect the NGC receiver to the USB port of your Windows device.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LB+LT, LS, Menu, RB+RT, View, Y, X, A, B, D-pad, RS

Ultimate Bluetooth Controller

1. Turn the Mode switch to BT position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, D-pad, RS

Ultimate 2.4G Controller

1. Turn the Mode switch to D position.

2. Press the Home button to turn on the controller.

3. Hold the Profile button for 5 seconds to switch to Bluetooth connection. (The controller will vibrate once)

4. Hold the Star button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

5. Connect the NGC receiver to the USB port of your Windows device.

6. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

7. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, D-pad, RS

Ultimate 2C Wireless Controller

1. Turn the Mode switch to BT position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, D-pad, RS

Ultimate 3-mode Controller for Xbox

1. Turn the Mode switch to BT position.

2. Press the Xbox button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, D-pad, RS

Pro 2 Bluetooth Gamepad

1. Turn the Mode switch to D position.

2. Press the Start button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LT, LB, D-pad, View, Menu, RT, RB, Y, B, A, X, Xbox, LS, RS

SN30 Pro+ Bluetooth Gamepad

1. Press the B+Start buttons to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

3. Connect the NGC receiver to the USB port of your Windows device.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LT, LB, D-pad, View, Menu, RT, RB, Y, B, A, X, Xbox, LS, RS

SN30 Pro Bluetooth Gamepad

1. Press the B+Start buttons to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

3. Connect the NGC receiver to the USB port of your Windows device.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LT, LB, D-pad, View, Menu, RT, RB, Y, B, A, X, Xbox, LS, RS

SN30 Pro for Android

1. Press the Xbox button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the USB port of your Windows device.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, D-pad, B, A, X, LS, RS

Lite 2

1. Turn the Mode switch to D position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, Xbox, D-pad, RS

Lite SE

1. Turn the Mode switch to D position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: View, Menu, LT, D-pad, LB, LS, RS, RT, Y, B, A, X, Xbox, RB

Lite

1. Turn the Mode switch to X position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LT, LB, D-pad, View, Menu, RT, RB, Y, B, A, X, Xbox, LS, RS

M30 Bluetooth Controller

1. Press the B+Start buttons to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

3. Connect the NGC receiver to the USB port of your Windows device.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LB, Menu, X, Y, LT, LS, View, RB, RT, B, A, Xbox

Micro Bluetooth Gamepad

1. Turn the Mode switch to D position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for a second to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: View, Menu, LT, RT, LB, RB, Y, D-pad, B, A, X, Xbox

NEOGEO Wireless Controller

1. Turn the Mode switch to BT position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LB, D-pad, View, Menu, RB, Y, B, A, X, Xbox

Arcade Stick V3

1. Turn the Mode switch to X position.

2. Turn the Connection switch to BT position.

3. Hold the Pair button for 3 seconds to enter its pairing mode, The four LEDs will start to blink clockwise. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, X, Y, View, RB, Menu, LB, LT, RT, B, A

8BitDo Mod Kit for Original N64 Controller

1. Turn the Mode switch to D position.

2. Press the Start button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

4. Connect the NGC receiver to the USB port of your Windows device.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Menu, X, LT, RT, LB, RB, D-pad, B, Y, A, LS

DualSense / DualSense Edge

1. With the controller off, press and hold Create+PS buttons for 3 seconds to enter its pairing mode, the Status LED blinks rapidly. (This is required for the very first time only)

2. Connect the NGC receiver to the USB port of your Windows device.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LT, LB, D-pad, View, Menu, RT, RB, Y, B, A, X, LS, RS, Xbox

DualShock 4

1. With the controller off, press and hold Share+PS buttons for 3 seconds to enter its pairing mode, the Status LED blinks rapidly. (This is required for the very first time only)

2. Connect the NGC receiver to the USB port of your Windows device.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: LT, LB, D-pad, View, Menu, RT, RB, Y, B, A, X, LS, RS, Xbox

Switch Pro

1. With the controller off, press and hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

2. Connect the NGC receiver to the USB port of your Windows device.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, D-pad, RS

Ultimate C Bluetooth Controller

1. Press the Home button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the USB port of your Windows device.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, D-pad, RS

Ultimate 2C Bluetooth Controller

1. Press the Home button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the USB port of your Windows device.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, D-pad, RS

Xbox One / Xbox Series / Xbox Elite Series 2 / Xbox Elite Series 2-Core / Xbox Adaptive Controller

1. Press the Xbox button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the USB port of your Windows device.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, Y, LS, B, A, X, LS, D-pad, RS

Wii U Pro

1. With the controller off, press and hold the Pair button for 3 seconds to enter its pairing mode, the Status LED blinks rapidly. (This is required for the very first time only)

2. Connect the NGC receiver to the USB port of your Windows device.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Xbox, View, Menu, LT, RT, LB, RB, LS, RS, Y, B, A, X, D-pad

8BitDo Mod Kit for Original NGC Controller

1. With the controller off, press and hold B+START buttons for 3 seconds to enter its pairing mode, the Status LED blinks rapidly. (This is required for the very first time only)

2. Connect the NGC receiver to the controller port of NGC console.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, R, Z, Y, X, LS, A, B, D-pad, RS

Ultimate Bluetooth Controller

1. Turn the Mode switch to BT position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Ultimate 2.4G Controller

1. Turn the Mode switch to D position.

2. Press the Home button to turn on the controller.

3. Hold the Profile button for 5 seconds to switch to Bluetooth connection. (The controller will vibrate once)

4. Hold the Star button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

5. Connect the NGC receiver to the controller port of NGC console.

6. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

7. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Ultimate 2C Wireless Controller

1. Turn the Mode switch to BT position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Ultimate C Bluetooth Controller

1. Press the Home button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Ultimate 2C Bluetooth Controller

1. Press the Home button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Ultimate 3-mode Controller for Xbox

1. Turn the Mode switch to BT position.

2. Press the Xbox button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Pro 2 Bluetooth Gamepad

1. Turn the Mode switch to D position.

2. Press the Start button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, RS

SN30 Pro+ Bluetooth Gamepad

1. Press the B+Start buttons to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, LS, RS

SN30 Pro Bluetooth Gamepad

1. Press the B+Start buttons to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, LS, RS

SN30 Pro for Android

1. Press the Xbox button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, LS, RS

Lite 2

1. Turn the Mode switch to D position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, LS, RS

Lite SE

1. Turn the Mode switch to D position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, Z, R, X, A, B, Y, LS, RS

Lite

1. Turn the Mode switch to X position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, LS, RS

M30 Bluetooth Controller

1. Press the B+Start buttons to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, START/PAUSE, Y, R, X, D-pad, Z, A, B

Micro Bluetooth Gamepad

1. Turn the Mode switch to D position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for a second to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, START/PAUSE, R, Z, X, D-pad, A, B, Y

NEOGEO Wireless Controller

1. Turn the Mode switch to BT position.

2. Press the Home button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: D-pad, Z, X, A, B, Y, START/PAUSE

Arcade Stick V3

1. Turn the Mode switch to X position.

2. Turn the Connection switch to BT position.

3. Hold the Pair button for 3 seconds to enter its pairing mode, The four LEDs will start to blink clockwise. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: Y, X, START/PAUSE, Z, D-pad, L, R, A, B

8BitDo Mod Kit for Original N64 Controller

1. Turn the Mode switch to D position.

2. Press the Start button to turn on the controller.

3. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

4. Connect the NGC receiver to the controller port of NGC console.

5. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

6. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: B, Z, RS, D-pad, START/PAUSE, A, LS

DualSense / DualSense Edge

1. With the controller off, press and hold Create+PS buttons for 3 seconds to enter its pairing mode, the Status LED blinks rapidly. (This is required for the very first time only)

2. Connect the NGC receiver to the controller port of NGC console.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, LS, RS

DualShock 4

1. With the controller off, press and hold Share+PS buttons for 3 seconds to enter its pairing mode, the Status LED blinks rapidly. (This is required for the very first time only)

2. Connect the NGC receiver to the controller port of NGC console.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, LS, RS

Switch Pro

1. With the controller off, press and hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to roll side to side. (This is required for the very first time only)

2. Connect the NGC receiver to the controller port of NGC console.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, D-pad, START/PAUSE, R, Z, X, A, B, Y, LS, RS

Ultimate C Bluetooth Controller

1. Press the Home button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Ultimate 2C Bluetooth Controller

1. Press the Home button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Xbox One / Xbox Series / Xbox Elite Series 2 / Xbox Elite Series 2-Core / Xbox Adaptive Controller

1. Press the Xbox button to turn on the controller.

2. Hold the Pair button for 3 seconds to enter its pairing mode, the Status LED will start to blink rapidly. (This is required for the very first time only)

3. Connect the NGC receiver to the controller port of NGC console.

4. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

5. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: START/PAUSE, L, R, Z, X, LS, A, B, Y, D-pad, RS

Wii U Pro

1. With the controller off, press and hold the Pair button for 3 seconds to enter its pairing mode, the Status LED blinks rapidly. (This is required for the very first time only)

2. Connect the NGC receiver to the controller port of NGC console.

3. Press the Pair button of the receiver, the Status LED starts to blink rapidly.

4. The Status LED of the controller and the receiver will remain solid to indicate a successful connection.

Button Layout: L, START/PAUSE, R, Z, LS, RS, X, A, B, Y, D-pad