DEJSA Table Lamp
by IKEA
Important Safety Information
This lamp is intended for indoor use only.
If the flexible outer cable of this lamp becomes damaged, it must be replaced exclusively by the manufacturer, its authorized representative, or a qualified electrician to avoid hazards. If you are uncertain, please contact IKEA.
Assembly Instructions
Follow these steps to assemble your DEJSA table lamp:
-
Step 1: Install the Light Bulb
Carefully screw the light bulb into the lamp socket. Ensure it is securely fitted.
Diagram: A light bulb is shown being screwed into the lamp's socket with a circular arrow indicating the turning motion.
-
Step 2: Attach the Lampshade/Cover
Place the lampshade or cover over the lamp base, securing it in place.
Diagram: The lampshade or cover is shown being placed onto the lamp base, covering the installed light bulb. A circular arrow indicates the motion.
Diagram: An illustration shows two figures. One figure is holding a lamp base and looking at it with a question mark above its head, suggesting a query or need for help. Another figure is on the phone, holding an IKEA product, implying contact with customer support or a representative.
