Inphic MS1 2.4G Wireless Mouse

Key Description

The Inphic MS1 2.4G Wireless Mouse features the following: Left key, Scroll Wheel, Forward button, Backward button, Battery indicator, 800/1200/1600 DPI switch, Right key, USB-C charging port, Power switch, Tracing engine, and USB Receiver.

The USB receiver is located on the bottom of the mouse.

Instructions for use:

1. Take out the receiver.
2. Plug the USB receiver into the computer's interface.
3. Power on the mouse to use.

Package Contents

• Inphic Wireless Mouse
• USB Receiver
• Charging Cable
• User Manual

Technical Parameters

• Model number: MS1
• Max. speed: 14 inches/second
• Scroll Wheel (Y/N): Yes
• Wireless operating distance: Up to 10m if without any interference
• Wireless technology: Advanced 2.4 GHz wireless connectivity
• Battery capacity: 400mAh
• Built-in battery voltage: 3.7V
• Rated operating current: ≤8mA
• Tracking System: Optical tracking

Operating System Compatibility

Compatible with: Windows Vista, Windows 7, Windows 8, Windows 10 and above; Android 5.0 and above; IOS13 and above; Mac OS X 10.10 and above, Chrome OS; Linux kernel 2.6+

Tips

1. The mouse can generally be fully charged in 2~3 hours and can be used for about 30 days after full charging. Battery life depends on different usage situations and the device.
2. The left and right buttons are mute (≤ 25dB), excluding side keys and scroll wheel.
3. The mouse is shipped with a protective film on non-slip mats; please remove it before use.
4. Please note that one mouse is equipped with one specific USB receiver. Please keep it well.

FCC Requirement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.