Inphic M1 PRO Dual Mode Mouse
User Manual and Technical Specifications
Key Description
The Inphic M1 PRO is a dual-mode mouse designed for versatile connectivity.
Connectivity Options
2.4 GHz Wireless Connection
1. Remove the receiver from the bottom of the mouse. 2. Plug the receiver into the USB port of your device. (Please keep the receiver safe.)
Bluetooth Connection
BT 5.0 Mode: Press and switch the mode to BT 5.0. The indicator light will flash slowly. Press the button again for about three seconds. The light will flash rapidly. In a few moments, the BT device named 'BT 5.0 Mouse' should appear in the list of discovered BT devices. Select it, then click 'Continue' to begin the pairing process. After successful pairing, the corresponding indicator light will stay on for 2 seconds and then turn off, indicating the mouse is ready for use.
BT 4.0 Mode: Press and switch the mode to BT 4.0. The indicator light will flash slowly. Press the button again for about three seconds. The light will flash rapidly. In a few moments, the BT device named 'BT 4.0 Mouse' should appear in the list of discovered BT devices. Select it, then click 'Continue' to begin the pairing process. After successful pairing, the corresponding indicator light will stay on for 2 seconds and then turn off, indicating the mouse is ready for use.
Technical Parameters
- Product Number: M1 PRO
- Max Acceleration: 14 inches/sec
- Scroll Wheel: Yes
- Wireless Operating Distance: 10 meters
- BT Technology: BT 5.0 / BT 4.0
- Wireless Technology: Advanced 2.4 GHz wireless connectivity
- Battery Type: Li-polymer rechargeable battery
- Battery Capacity: 700mAh
- Built-in Battery Voltage: 3.7V
- Tracking System: Optical tracking
Operating System Compatibility
- Windows 8, Windows 10, Android 5.0 and above
- macOS 10.13 and above
- Linux 2.6+
- Chrome OS
Warranty Policy
Care-Free Warranty: Inphic offers a 12-month warranty from the date of purchase for defects caused by faulty material or workmanship. For warranty service, contact Inphic customer support via email at support@inphic.cn.
Customer Feedback
Inphic values customer feedback. To submit a review or share your experience:
- Log into your account on Amazon.com.
- Click on 'Your Orders'.
- Click on the specific Inphic product you purchased.
- Post your review in the middle of the page.
Your feedback helps Inphic improve its products and services.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
