PARKSIDE PHKP 500 SE Hot Glue Gun: Operation, Safety, and Maintenance Manual

Introduction

Pictograms Used

• ? Read instruction manual!
• V~ Volt (AC)
• W Watts (Effective power)
• Ⓢ Safety class II
• ⚠️ Observe caution and safety notes!
• ?⚡ Keep children away from electrical devices!
• ? For indoor use only!
• ⚡ Risk of loss of life by electric shock from damaged mains lead or mains plug!
• ? Danger of burns from nozzle or glue (up to 200 °C)!
• [Cordless operation symbol] Cordless working
• ? Wear protective gloves!
• ♻️ Dispose packaging and appliance in an environmentally-friendly way!

Device Overview (Diagram Description)

The hot glue gun features the following components:

Additional components include:

• Interchangeable Nozzles (A): Two nozzles are provided, one short and one long, for different applications.
• Usage Examples (B-F): Images demonstrate various uses such as crafting, organizing supplies, and joining materials.

Introduction to the Device

Familiarise yourself with all safety instructions and functions before operating the machine. Keep these instructions in a safe place and pass them on with the tool if it changes ownership.

Features

• Feed channel
• Check indicator
• Charger connection
• Charger with stand
• Feed clamp
• Wire stand
• Drip tray
• Nozzle
• Nozzle heat shield
• Glue gun connection
• Mains lead

Included Items

• 1 Hot glue gun PHKP 500 SE
• 1 Charger with stand
• 1 Mains lead
• 1 Wire stand
• 1 Replacement nozzle (short)
• 1 Interchangeable nozzle (long)
• 6 Glue sticks
• 1 Carry case
• 1 Operating instructions

Technical Details

• Nominal voltage: 230 V~ 50 Hz
• Nominal power: approx. 40 W (500 W)
• Heating up time: approx. 4 min.
• Protection class: II [Double Insulated]

Proper Use

This device is intended for gluing wood, cardboard, packaging, PVC, carpet, seals, plastic, leather, ceramic, glass, and textiles using hot-melt adhesive. Materials to be glued must be clean, dry, and free of grease. Any other use or modification is considered improper and may lead to dangers. The manufacturer is not liable for loss or damage from improper use. The tool is not intended for commercial use.

Safety Notes

ATTENTION! Please read all instructions and advice. Failure to observe them may result in electric shock, fire, and/or serious injury. Keep all safety advice and instructions for future reference.

1. Workplace Safety

• Keep your working area clean and clutter-free. Untidy or poorly lit areas can lead to accidents.
• Do not allow the device to become wet or operate it in a moist environment.
• Keep children and other people away while operating the tool, as distractions can cause loss of control.
• Persons lacking knowledge, experience, or with limited physical/sensory/intellectual capacities must not use the device without supervision. Children must never be allowed to play with the device.
• When not in use, the tool must be placed on its wire stand (6).

2. Electrical Safety

• Ensure the mains plug matches the mains socket and is not modified. Do not use adapter plugs with earthed devices.
• Avoid touching earthed surfaces (pipes, radiators, ovens, refrigerators) to reduce the risk of electric shock.
• Keep the device away from rain or moisture.
• Do not use the mains lead for unintended purposes (carrying, hanging, pulling plug). Keep the lead away from heat, oil, and sharp edges. If the lead is damaged, pull the plug immediately.
• When working outdoors, use extension cables approved for outdoor use.

3. Personal Safety

• Remain alert, watch your actions, and proceed with caution. Do not use the device if tired or under the influence of drugs, alcohol, or medication.

4. Burns and Injury Prevention

DANGER OF BURNS! The glue and nozzle can reach temperatures of 200 °C. Do not touch the nozzle or glue. Keep others and animals away. If contact occurs with skin, hold the affected part under running cold water for several minutes. Do not attempt to remove glue from the skin.

5. Careful Handling and Use of Electrical Power Tools

• Pull the mains plug before making adjustments, changing accessories, or putting the device away to prevent unintentional starting.
• Keep electrical power tools out of reach of children. Do not let inexperienced individuals use the device without reading instructions. Let the device cool down completely before storing.
• Look after the device carefully. Check moving parts for proper function. Inspect for broken or damaged parts that could affect performance and have them repaired before use.
• Always work with the mains lead leading away from the rear of the device.

Operation

Before First Use: Preparing the Glue Site

• Do not use flammable solvents to clean the glue site.
• Ambient and material temperature should be between +5 °C and +50 °C.
• Glue sites must be clean, dry, and free of grease.
• Roughen smooth surfaces before gluing.
• Warm materials prone to rapid cooling (e.g., steel) to improve adhesion.
• Screw on the appropriate nozzle (8) and fit the wire stand (6).

Preparing the Tool for Use

Working with the Mains Lead Connected:

1. Connect the mains lead (11) to the glue gun connection (10).
2. Insert the mains plug into the mains socket.
3. Fold forward the wire stand (6) and stand the device up.
4. Push a glue stick into the feed channel (1).
5. Let the device heat up for about 4 minutes. It is now ready for use.

Cordless Working (via Charger):

1. Connect the mains lead (11) to the charger connection (3).
2. Insert the mains plug into the mains socket.
3. Place the glue gun into the charger (4).
4. Push a glue stick into the feed channel (1).
5. Let the device heat up for about 4 minutes. It is now ready for use.
6. Repeat heating if the feed switch becomes stiff or glue output becomes viscous.

Gluing

• Press the feed clamp (5) to regulate glue flow.
• Apply glue in dots or zig-zags on flexible materials.
• Press materials together immediately for about 30 seconds. The joint can be loaded after about 5 minutes.
• During breaks, set the glue gun on its wire stand (6) or in the charger (4).
• Remove residue with a sharp knife after cooling. Glued joints can be loosened by applying heat.

Switching Off the Device

• Pull the mains lead out of the mains socket.

Changing the Nozzle

• Wear protective gloves (?).
• Heat up the device for about 4 minutes.
• Change the nozzle (8) when it is hot.
• DANGER OF BURNS! Touch the nozzle (8) only by the heat shield (9). The nozzle tip is hot!

Maintenance and Cleaning

The glue gun is maintenance-free.

• WARNING! Pull the mains lead out before cleaning.
• Keep the device clean and dry. Do not allow liquids to enter.
• Use a soft cloth to clean the housing. Never use petrol, solvents, or cleaning agents that might attack plastic.

Service

• WARNING! Have your device repaired only by qualified specialist personnel using original manufacturer parts to ensure safety.
• If the plug or mains lead needs replacement, have it carried out by the manufacturer or its service centre.

Warranty

This appliance is guaranteed for 3 years from the date of purchase. Keep your receipt as proof. Contact your service centre for warranty queries. This warranty applies only to the initial purchaser and is non-transferable.

The warranty covers material or manufacturing faults, not normal wear or damage to fragile parts. The appliance is intended solely for private, not commercial, use. Improper handling, abuse, or unauthorized interventions void the warranty. This warranty does not affect your statutory rights.

Contact Information:

• GB: DES UK LTD, Tel.: 0871 5000 700 (£ 0.10/minute), e-mail: support.uk@kompernass.com
• IE: Kompernaß Service Ireland, Tel.: 1850 930 412 (0.082 €/Min.) [*Standard call rates apply. Mobile operators may vary.], e-mail: support.ie@kompernass.com

Disposal

• Packaging is made of recyclable materials; dispose of at local recycling facilities.
• Do not dispose of electrical appliances in household waste.
• Used power tools must be collected separately and recycled ecologically, in accordance with EU Directive 2002/96/EC.
• Information on disposal options can be obtained from your local or city council.

Declaration of Conformity / Manufacturer

We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum, Germany, declare that this product complies with the requirements of the following EU directives:

• EU Low Voltage Directive (2006/95/EC): EN60335-1, EN60335-2-45
• Electromagnetic compatibility (2004/108/EC): EN55014, EN55014-2, EN61000-3-2, EN61000-3-3

Description of the device: PARKSIDE Hot glue gun PHKP 500 SE

Bochum, 30.11.2009

Hans Kompernaß
- Managing Director -

We reserve the right to make technical modifications in the course of further development.