Parkside Hot Glue Gun PNKP 105 A1

Introduction

Congratulations on your new product. You have selected a high quality product. The instructions for use are a part of this product. They contain important information about safety, use and disposal. Before using the product, please familiarise yourself with all the operating and safety instructions. Only use the product as described and for the indicated purpose. When passing this product on to others, please be sure to include all its documentation.

Intended Use

This device is specially designed for a multitude of creative hobby tasks for gluing heat sensitive materials such as paper, flowers, wood, cardboard, packaging, plastic, leather, ceramic, glass and fabric. The material which is to be glued must be clean, dry and grease free. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufacturer is not liable for damage caused by improper use. The device is not intended for commercial use.

Features

• 1 Feed canal: The channel for feeding glue sticks into the gun.
• 2 Mains lead: The power cable to connect the device to the mains socket.
• 3 Feed trigger: Squeezed to control the flow of glue.
• 4 Stand leg: A support to keep the hot glue gun stable when not in use.
• 5 Nozzle: The tip from which the hot glue is dispensed.
• 6 Heat protected cover of the nozzle: Protects against burns from the hot nozzle.
• 7 Glue sticks: The consumable adhesive sticks used with the gun.

Scope of Delivery

• 1 Hot glue gun PNKP 105 A1
• 1 Stand leg
• 6 Glue sticks
• 1 Set of operating instructions

Technical Data

Mains voltage: 230V~ 50Hz

Rated power: 5W (at start up 20W)

Operating temperature: 105–140 °C

Heating up time: approx. 5 min.

Protection class: II /

For glue sticks: Ø 7 mm e.g. Dremel GG02, GG04, GG05, PARKSIDE PNKPZ 20A1

Safety Instructions ⚠️

ATTENTION! Read all the instructions. Failure to observe the following instructions can result in electric shock, fire and/or serious injury.

Keep all safety advice and instructions in a safe place for future reference.

• This appliance may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the appliance and understand the associated risks. Children should not be allowed to play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.
• Children should be supervised in order to ensure that they do not play with the device.
• ATTENTION! This device must be stood on its stand leg 4 when it is not in use.
• Keep the device away from rain and moisture. Water entering an electrical device increases the risk of electric shock.
• Do not use the cable for any purpose for which it was not intended, e.g. to carry the product, to hang it up or to pull the mains plug out of the mains socket. Keep the cable away from heat, oil, and sharp edges. If the mains cable is damaged or severed whist in use, do not touch it, remove the mains plug immediately.
• Damaged or tangled cables increase the risk of an electric shock.
• If the mains power cable of this appliance is damaged, it must be replaced by the manufacturer or its service department, or a similarly qualified person to prevent hazards.
• Use in weather protected rooms only.
• Unplug if you will not be using the device for more than 30 minutes.
• Let the device completely cool down after use and before storing.
• Do not use on material containing asbestos.
• Avoid the risk of injury and burns as well as health hazards:
• Risk of burning! The glue and the nozzle reach over 105 °C. Do not touch the nozzle or the glue. Do not let the hot glue touch people or animals. If there is contact with skin immediately put the affected area under cold running water for several minutes. Do not try to remove the glue from your skin.
• Always run the power cable away from the appliance to the rear.

Operation

Preparing the area to be glued:

• Do not use any flammable solvents to clean the area.
• The room temperature and the temperature of the material to be glued may not be colder than +5 °C and no warmer than + 50 °C.
• The area must be clean, dry and grease free.
• Smooth out the surface before gluing.
• Warm up cooled material such as e.g. steel for a better join.

Start-up:

1. Fold the stand leg 4 out. Set the device aside.
2. Put a glue cartridge in the feed canal 1.
3. Let the device warm up for 5 minutes. The device is now ready to use.

Gluing:

Press the feed trigger 3 to start and control the flow of glue.

1. Apply the glue in dots. Apply the glue in a zigzag line on flexible material e.g. textiles.
2. Press both glued together work-pieces together immediately after applying the glue for approx. 30 seconds. The glued area is resilient after approx. 5 minutes.
3. Place the glue gun on its stand leg 4 between gluing.

Switching the device off:

Pull the mains plug from the socket.

Maintenance and Cleaning

The low temperature glue gun is maintenance free.

WARNING! Unplug the mains plug from the socket before cleaning.

• Always keep the device clean, dry and free of oil or grease.
• Do not allow liquids to enter the equipment.
• Please use a soft cloth for cleaning the housing. Never use petrol, solvents or cleaning agents that attack plastic.

Service

WARNING! Have your appliance repaired by qualified specialist personnel using OEM parts only. This will maintain the safety of the device.

WARNING! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will maintain the safety of the device.

Note: Spare parts not listed (e.g. carbon brushes, switches) can be ordered through our call centre.

Warranty

The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured.

The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e.g. buttons or batteries. This product is for private use only and is not intended for commercial use.

The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty.

The warranty period will not be extended by repairs made under warranty. This applies also to replaced and repaired parts. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment.

Service Great Britain

Tel.: 0871 5000 720 (0.10 GBP/Min.)

e-mail: kompernass@lidl.co.uk

IAN 93549

Disposal

The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre.

Do not dispose of electrical equipment in the household waste! ?️

According to European Directive 2002/96/EC, used electrical devices must be collected and recycled in an environmentally friendly manner. Contact your local refuse disposal authority for more details of how to dispose of your worn-out devices.

Declaration of Conformity

This product complies with the following standards, normative documents and EU directives:

• EU Low Voltage Directive (2006/95/EC): EN 60335-1:2012, EN 60335-2-45/A2:2012, EN 62233:2008
• Electromagnetic compatibility (2004/108/EC): EN 55014-1/A2:2011, EN 55014-2/A2:2008, EN 61000-3-2/A2:2009, EN 61000-3-3:2008
• RoHS Directive (2011/65/EU)

Type/Device description: Hot glue gun PNKP 105 A1

Date of manufacture (DOM): 10–2013

Serial number: IAN 93549

Bochum, 31.10.2013

Manufacturer: KOMPERNASS HANDELS GMBH, BURGSTRASSE 21, 44867 BOCHUM, GERMANY