Namron LED Dimmer 600W
Instruction Manual
220-240V~ 50Hz IP20
Product Description
This is a push/rotary dimmer designed for use in two-way switch systems with standard wiring. It is suitable for LED lights, electronic transformers, and halogen lamps.
Important Safety Information
⚠️ This dimmer can be used in a two-way switch system with a normal two-way switch wiring. Minimum load depends on the type of light source or electronic converter. It may be necessary to increase the load to a minimum of 10W.
Technical Specifications
| Parameter | Specification |
|---|---|
| Operating Voltage | 220-240V~ 50Hz |
| LED Light Load | 5-600W |
| Electronic Transformer/Halogen Load | 5-600W |
| Halogen Lamp 240V Load | 5-600W |
The dimmer mounts in a standard electrical box or surface mounting. It features short-circuit protection, overload protection, and lamp breakdown protection.
Wiring and Installation
Wiring Diagram
The dimmer has terminals for Live (L) and Neutral (N). It also includes terminals L1, L2, and Bx for connecting in a two-way switching configuration. The diagram indicates that the load connection can be placed optionally.
Note: For adjusting minimum brightness or to resolve flickering, there is an adjustment screw. ⚙️
Measurements
The physical dimensions of the dimmer are:
- Front face width: 84mm
- Depth: 22.70mm
- Mounting depth: 46.65mm
Installation Notice
? OBS! This product must be installed by an authorized electrician!
