Energizer PPS1100W2F Portable Power Station

Specifications

Model Name: PPS1100W2F

Cell Type: Lithium Manganese Iron Phosphate (LMFP)

Battery Capacity: 42Ah/26.25V, 1102.5Wh

DC Input: 24V/7.5A

AC Input: 230V/ 50Hz 1000W

AC Output: 3 x 230Vac/ 50Hz, 1200W Max. (Peak 2400W)

DC Output: 2 x 12V/10A (10A Max.)

Car Charger Outlet: 12V/10A Max. (Shared DC Output)

USB Output: 2 x 5V/3A, 9V/2A, 12V/1.5A

USB-C1 Output: PD 5V/3A, 9V/2A, 12V/1.5A (18W Max.)

USB-C2 Output: PD 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (100W Max.)

Solar Panel Input: MPPT 12V-30V (180W Max.)

LED Light: 5W

Material: Flame Retardant Plastic

Dimensions: 316(L) x 240(W) x 300(H) mm

Weight: 14kg ± 500g

Made in: China

Pure Sine Wave Output

This product generates a pure sine wave output, compatible with AC electrical appliances that operate with a sinusoidal waveform (power less than 1200W). It is intended for emergency situations and cannot replace standard DC or AC power supplies for household appliances or digital products.

Package Contents

• Portable Power Station x 1
• Power Cord x 1
• Solar Panel Extension Adapter x 1
• User Manual x 1

Product Description - Front Panel Layout

The front panel features:

• Handle
• DC button [DC]
• AC button [AC]
• USB output ports [USB]
• Cigarette lighter outlet
• DC input port [DC IN]
• DC output ports [DC OUT]
• AC output sockets [AC OUT]
• LED display
• USB button [USB]
• LED light button [LED]
• USB-C1 output port [USB-C1]
• USB-C2 output port [USB-C2]
• AC input port [AC IN]
• Power button [POWER]

Operating Instructions

AC Output

A. Press the [AC] button to activate AC mode. B. Connect your device's plug to the AC outlet to begin charging. Note: Do not connect devices exceeding 1200W. The AC plug type varies by region.

Power Button

A. Long press the [POWER] button for 3 seconds to turn the power station on or off.

AC On/Off Button

A. When the power station is on, short press the [AC] button to activate AC output. B. Short press the [AC] button again to deactivate AC output. C. To switch frequency (60Hz/50Hz), press and hold the [AC] button for 3 seconds.

LED Button

A. When the power station is on, press the [LED] button to activate the LED light. The light bulb icon [?] will appear on the display. B. Press the [LED] button to adjust brightness. C. Press the button again to cycle through modes: constant light, flashing light, SOS flashing mode, and off. The light bulb icon will disappear when off. D. Warning: DO NOT stare directly at the light.

USB Outputs

A. For fast charging, use compatible cables and devices. B. USB-C supports Power Delivery technology.

Note: If USB-A outputs are overloaded or short-circuited, short press the [POWER] button to reactivate charging. For USB-C, unplug and replug the cable to restore charging.

DC Outputs

A. Can connect to a car charger outlet (max 100W).

Note: Over-current or short-circuit protection will display an icon shutdown. Short press the [POWER] button to restore. For short-circuit, long press the [POWER] button to restart the station.

How to Recharge

The power station can be recharged via AC input or DC input (including solar).

• AC Input: Connect the AC power cord to the AC input port and a main power source. The fast charging icon [⚡] will light up, the battery level icon [?] will flash, and the fan icon [?] will light up indicating the fan is working.
• DC Input / Solar Panel: Connect to an adapter or solar panel via the DC input port. The DC IN icon [DC IN] will light up, the battery level icon [?] will flash, and the fan icon [?] will light up.

LED Display

A. The charging level is shown in a 10-segment pie chart [?]. B. A blinking light indicates charging status; a solid light indicates a full charge. C. Icons light up when their function is activated. D. The unit will automatically turn off after 3 minutes of inactivity. E. If the unit is in use, short press the [POWER] button twice to turn off the LED display (output continues). Short press any button to reactivate the display.

Charging While Discharging (Bypass Mode)

When connected to a main power source and charging other devices simultaneously, the current will power your devices and bypass the internal battery. The output will show 0 on the LCD. When disconnected from the main power, the unit will immediately switch to battery power, and the display will show the output power being discharged.

Recharge Through Solar Panel

A. Place the solar panel in a location with the strongest, most direct sunlight possible. B. Connect the cable to the input port to begin charging. Note: Actual charging efficiency varies with weather, temperature, sunlight strength, and panel angle. Use solar panels below 30V; the unit will cut off input above 30V. Built-in MPPT technology ensures efficient solar charging.

Function Introduction

This product is versatile and suitable for indoor and camping use.

• Use Cases: Long-Distance Travel, Camping, Wild Exploration.
• AC Inverter: The 230V AC inverter can power low-power appliances such as lamps, laptops, mini fans, and mini cookers.
• DC Outputs: Features DC output, cigarette lighter interface, 18W USB fast charging ports, and PD charging ports. It can power digital devices like mobile phones, GPS units, DVD players, and small mobile devices.
• LED Light: Equipped with a high-brightness LED offering adjustable brightness, flashing, emergency light, and SOS signal modes.

Precautions

• Do not short-circuit the product. Keep away from metal objects (coins, hairpins, keys, etc.).
• Do not heat the product, expose it to fire, water, or other liquids. Keep away from high ambient temperatures and direct sunlight.
• Keep away from humid and dusty places.
• Do not disassemble or reassemble the product.
• Do not drop, place heavy objects on, or subject the product to strong impacts.
• To charge some portable electronic devices, you may need to set those devices in charge mode first. Refer to their user manuals.
• Keep this product away from children.
• Do not cover the product with towels, clothing, or other items.
• Do not overcharge the product.
• When fully charged, disconnect the product from the power source immediately.
• Keep the product away from TVs, radios, and other equipment during charging to avoid radio wave interference.
• If not using the product for a long time, disconnect the cable before storing it.
• NOT Waterproof: Do not use or store in wet environments. Rain, water spray, juice, coffee, steam, sweat, and other liquids may cause breakdown.
• NOT Dustproof: Do not use in sandy and dusty environments (beaches, deserts) as it may cause breakdown.

Cold Weather Usage

Cold temperatures (-10-65°C) can affect battery capacity due to chemical characteristics. If operating off-grid in sub-zero conditions, keep the product in an insulated cooler connected to a power source (car charger/AC adapter/solar panel) to maintain battery capacity via generated heat.

Disposal and Recycle

This product should not be disposed of with household waste. Dispose of or recycle this product and its battery according to local rules and regulations.

Battery Information

This product has an internal, non-removable, rechargeable Lithium Manganese Iron Phosphate (LMFP) battery. Do not attempt to remove it. The battery can be charged and discharged over 2000 times.

Fault Codes

The following table lists common fault codes and their solutions:

PowerSafe Management & Customer Service

PowerSafe Management guarantees against short circuit and over-charging for your power station and connected devices.

For any questions about the product, please contact Energizer Customer Service at service@energizerpowerpacks.com.

Copyright and Trademarks

©2024 Energizer. Energizer, Energizer Character, and certain graphic designs are trademarks of Energizer Brands, LLC and its related subsidiaries, and are used under license by TennRich International Corp.

Document Version: UM_2_PPS1100W2F_EN_1.1