Energizer Portable Power Station PPS300W2
This document provides instructions and specifications for the Energizer Portable Power Station PPS300W2.
Product Overview
The Energizer Portable Power Station PPS300W2 is a versatile and powerful device designed for various power needs, from indoor use to outdoor adventures. It features a high-capacity lithium-ion battery, multiple output ports, and a built-in LED flashlight.
Key Features
- LED Flashlight: Features multiple modes including steady light, flashing, emergency light, and SOS signal. Can be removed for separate use.
- USB Outputs: Includes USB-A ports (one 18W fast charge) and a USB-C port with Power Delivery technology for fast charging compatible devices.
- DC Outputs: Provides DC outputs for powering various devices, including a car charger outlet (12V/10A Max.).
- AC Output: Offers a 230Vac/50Hz AC output with a maximum of 300W (peak 600W), suitable for low-power appliances.
- Wireless Charging: Features a wireless charging pad for compatible devices (5W/10W).
- Pure Sine Wave Output: Ensures compatibility with sensitive AC appliances.
- LCD Display: Shows real-time input/output power, battery level, and status indicators.
- Rechargeable: Can be recharged via solar panels (MPPT 12V-28V, 60W Max.), DC input (19V/3.15A), or USB-C PD input (up to 60W).
Specifications
| Specification | Details |
|---|---|
| Model Name | PPS300W2 |
| Cell Type | Lithium Ion |
| Battery Capacity | 20.4Ah/14.4V, 293.76Wh |
| DC Input | 19V/3.15A |
| AC Output | 1 x 230Vac/50Hz 300W Max. (Peak 600W) |
| DC Output | 2 x 12V/10A (10A Max.) |
| Car Charger Outlet | 12V/10A Max. (Shared DC Output) |
| USB-C Input/Output | PD 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A (60W Max.) |
| USB Output | 5V/3A, 9V/2A, 12V/1.5A |
| USB Output | 2 x 5V/2.4A |
| Wireless Output | 5W/10W |
| Solar Panel Input | MPPT 12V-28V (60W Max.) |
| LED Light | 4W |
| Material | V0 Fireproof PC+ABS |
| Dimensions | 250(L)*152(W)*144(H) mm |
| Weight | 3.55kg±100g |
| Made In | China |
How to Recharge
The power station can be recharged through several methods:
- Solar Panel: Place the solar panel in direct sunlight and connect it to the DC input port. Ensure the power station is shaded during charging to prevent overheating.
- DC Input: Use a compatible power adapter connected to the DC input port.
- USB-C PD Input: Connect a PD adapter to the USB-C PD input port. For optimal fast charging, a 60W or higher PD adapter is recommended. Both DC and USB-C PD inputs can be used simultaneously.
How to Use
- Power Button: Long press the Power & Display On/Off button for 3 seconds to turn the unit on or off. A short press turns the LCD display off while keeping outputs active.
- AC Button: Long press the AC button to activate the AC output.
- USB Button: Long press the USB output on/off button for 3 seconds to activate wireless charging. Place a compatible device in the center of the charging pad.
Important Safety Information
- Do not expose to fire, heat sources, or direct sunlight exceeding 265°F (130°C).
- Do not expose to water or wet environments; the product is not waterproof.
- Do not attempt to repair the product yourself.
- Ensure proper ventilation; do not block air vents.
- Do not connect devices exceeding the specified wattage limits (e.g., 300W for AC output).
- Keep fingers and hands away from the product's interior.
- Save these instructions.
Maintenance and Care
- If the product is not used for a long time, turn it off completely and store it in a dry place.
- Recharge the unit every 3 months and maintain the power level between 60%-80%.
- Charge the unit if the power level drops below 10%.
- Replace the car charger cable fuse (15A) with a compatible one if needed.
Troubleshooting (Fault Codes)
- E01: DC output overload or short-circuit. Solution: Disconnect devices, long press DC button to restore.
- E03: AC output/input overload or short-circuit. Solution: Disconnect AC device, long press AC button to restore.
- E04: AC output over-temperature. Solution: Disconnect AC device; fault clears when temperature normalizes.
- E05: PD input/output overload or short-circuit. Solution: Disconnect PD devices and reconnect.
- E06: Battery over-temperature or low-temperature. Solution: Disconnect all devices; fault clears when temperature normalizes.
- E08: USB-A output overload or short-circuit. Solution: Disconnect USB-A devices, long press USB button or connect PD output to restore.
- E9: DC charging over-voltage. Solution: Disconnect DC device; fault clears when voltage normalizes.
- E10: DC charging low-voltage. Solution: Disconnect DC device; fault clears when voltage normalizes.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Declaration of Conformity
Manufacturer: TennRich International Corp. Address: 1-3, Alley 5, Lane 305, Sec 1, Shin Nan Road, Lu Chu District, Taoyuan City, Taiwan 338. Model Number: PPS300W2. Equipment Model Designation: Energizer Portable Power Station. The manufacturer declares that the product conforms to relevant Union harmonization legislation, including EMC Directive 2014/53/EU and LVD Directive 2014/53/EU, and various EN standards. Test reports from Shenzhen BANTEK Testing Co., Ltd. and Shenzhen Alliance Testing Technology Co., LTD. are referenced, dated May 2024.
Customer Service
For any questions about the product, please contact service@energizerpowerpacks.com.
TennRich International Corp.
