Energizer Portable Power Station PPS300W2

Specifications

Pure Sine Wave Output

This product generates pure sine wave, which is compatible with AC electric appliances that work with sinusoidal waveforms. However, the product is intended for emergency situations and cannot replace standard DC or AC power supplies for household appliances or digital products.

Package Content

• Portable Power Station x 1
• Power Adapter x 1
• User Manual x 1
• Solar Panel Extension Adapter x 1
• Carry Bag x 1

Product Description

The portable power station features various ports and indicators for operation. A diagram illustrates the layout of the device:

• 1 Air Vents
• 2 LED Flashlight
• 3 USB Power Button
• 4 USB-C Input/Output
• 5 Wireless Charging Output
• 6 18W USB Output
• 7 AC Power Button
• 8 AC Power Output
• 9 USB-A Output
• 10 LED Display
• 11 Main Power Switch
• 12 LED Light Button
• 13 DC Input
• 14 DC Power Button
• 15 DC Output
• 16 Car Charger Outlet
• 17 USB-A Output
• 18 LED Flashlight Indicator

AC Output

A. Press the AC on/off button to activate AC mode.

B. Connect the appropriate plug to the electrical outlet/socket to begin charging.

NOTE:

A. Do not connect devices/appliances that draw over 600W.

B. The AC electric plug type is based on the country/region where the product is sold.

How to Charge

Power Button

A. Long press the power button for 3 seconds to turn on the power station.

B. Long press the power button to turn off the power station.

AC on/off Button

A. When the power is on, short press the AC button to turn on AC charging.

B. Short press the AC button to turn off the AC charging.

LED Flashlight Button

A. When the power is on, press the LED flashlight button to turn on the LED flashlight mode.

B. Press the button again to switch between modes: flashing light mode, SOS mode, and off mode.

C. The LED flashlight can be removed for separate use. Return it to its place to recharge, or recharge via the USB-C input port. Flashing LED lights indicate the flashlight is charging, and solid LED lights indicate it is fully charged.

D. Warning: DO NOT stare at the light directly.

USB Outputs

A. For fast charging, please use compatible cables and devices.

NOTE: When USB-A outputs are overloaded or enter short circuit mode, short press the power button to reactivate USB-A charging. For USB-C, unplug and plug in the USB-C cable again to restore charging.

DC Outputs

A. Can connect to a car charger that is no more than 100W.

NOTE:

A. Over-current protection: When the DC output is over current, the corresponding icon on the display will shut off. Short press the power button to restore.

B. Short-circuit protection: When the DC external short circuit protection is on, the corresponding icon on the display will shut off. Long press the power button to restart the power station and restore output.

How to Recharge

Fast Recharge Through DC Input+ USB-C PD Input

A. Connect the power adapter to the DC input port to begin recharge.

B. Connect the PD adapter to the USB-C PD input port to begin recharge.

C. The DC input port and USB-C PD input port can charge simultaneously.

Remark: To optimize fast charge performance, it is highly recommended to recharge your power station with a USB-C PD adapter (not included) with a high power input of 60W or above.

LED Display

The LED display shows real-time input power, battery level indicator, battery capacity, time remaining (Hrs), frequency (Hz), and various status icons. It indicates charging level with pie charts (5 segments), blinking lights for charging status, and solid lights for full charge. Icons light up when functions are activated. If the power station is not in use, it will automatically turn off in 3 minutes. If the power station is in use, short-press the power button once to turn off the LED display; the power supply remains uninterrupted. Short-press the power button again to turn on the LED display.

Recharge Through Solar Panel

A. Place the solar panel where it will get the strongest and most direct sunlight as possible.

B. Connect the cable to the input port to begin recharge.

NOTE:

A. The actual charging efficiency can vary widely depending on the weather, ambient temperature, sunlight's strength, and the angle that the solar panels face towards the sunlight, among other factors.

B. Use solar panels below 28V for charging; it will automatically cut off when input is higher than 28V.

C. Built-in MPPT technology allows the solar panel to recharge efficiently.

Function Introduction

1. This product is versatile and suitable for indoor and camping use, ideal for: Long-Distance Travel, Camping, Wild Exploration.

2. This product has a 120V AC inverter function, capable of powering low-power appliances such as: Mini Fan, Mini Cooker, Lamps, Laptop, etc.

3. This product features a DC output interface, 18W USB fast charging ports, and PD charging ports. DC output function allows it to power digital products such as Mobile Phones, GPS units, DVD Players, and small mobile devices.

4. This product includes a built-in high-capacity battery, making it suitable for camping activities. It is also equipped with a high brightness LED, which has several modes: adjustable-brightness lighting, flashing, emergency light, and SOS signal.

Cautions

• Do not short-circuit the product. To avoid short-circuiting, keep the product away from all metal objects (e.g., coins, hair-pins, keys, etc.).
• Do not heat the product, or dispose of it in fire, water, or other liquids. Keep it away from high ambient temperature. Do not expose the product to direct sunlight.
• Keep the product away from humid, dusty places.
• Do not disassemble or reassemble this product.
• Do not drop, place heavy objects on, or allow strong impact to this product.
• To charge some portable electronic devices, you may need to set those devices in charge mode first. Refer to the corresponding user manual of those devices for confirmation.
• Please keep this product away from children.
• Do not cover the product with towels, clothing, or other items.
• Do not overcharge this product.
• When fully charged, disconnect the product from the power source immediately.
• When charging this product, please keep it away from TVs, radios, and other equipment to avoid radio wave interference.
• If you are not going to use this product for a long time, please disconnect the cable before storing it away.

⚠️ Warning: This product is NOT waterproof. Do not use or store it in a wet environment. Rain, water spray, juice, coffee, steam, sweat, and other liquids may cause a breakdown. This product is NOT dustproof. Do not use in sandy and dusty environments, such as beaches and deserts, as it may cause a breakdown.

Cold Weather Usage

Cold temperatures (14~140°F / -10 ~ 65°C) can affect the product's battery capacity due to chemical characteristics. If you will be off-grid in sub-zero conditions, it is recommended to keep your product in an insulated cooler and connected to a power source (car charger/AC adapter/solar panel). The natural heat generated by the product contained in an insulated cooler will help maintain battery capacity. For charging the power station, the input temperature range is 32~113°F (0~45°C). The operating temperature range is 23~113°F (-5~45°C).

Disposal and Recycle

This product should not be disposed of with household waste. Please dispose of or recycle this product and its battery according to local rules and regulations.

Battery Information

This product has an internal, non-removable, Lithium Ion rechargeable battery. Do not attempt to remove the battery, as you may damage the device. The battery can be charged and discharged over 1500 times.

Fault Codes

The LED display may show malfunction alerts and fault codes. A diagram illustrates the display with indicators for input/output power, battery status, and fault codes.

• Fault Code: E01
  Fault Content: DC output overload
  Fault Solution: Disconnect the devices in the DC connection, short press the DC button to switch on the DC output function.
• Fault Code: E02
  Fault Content: DC output short-circuit
  Fault Solution: Disconnect the devices in the DC connection, short press the DC button to switch on the DC output function.
• Fault Code: E03
  Fault Content: AC output/input overload or short-circuit
  Fault Solution: Disconnect the AC output device, short press the AC button to switch on the AC function.
• Fault Code: E04
  Fault Content: AC output over-temperature
  Fault Solution: Disconnect the device in the AC connection. When the working temperature returns to the normal level, the fault code will be removed.
• Fault Code: E05
  Fault Content: PD input/output overload or short-circuit
  Fault Solution: Disconnect the devices in the PD connection and reconnect it.
• Fault Code: E06
  Fault Content: Battery over-temperature
  Fault Solution: Disconnect all the devices. When the working temperature returns to the normal level, the fault code will be removed.
• Fault Code: E07
  Fault Content: Battery low-temperature
  Fault Solution: Disconnect all the devices. When the working temperature returns to the normal level, the fault code will be removed.
• Fault Code: E08
  Fault Content: USB-A output overload or short-circuit
  Fault Solution: Disconnect the devices in USB-A connection first. Short press the USB button or connect the PD output interface then. After that, the fault code will be removed automatically.
• Fault Code: E09
  Fault Content: DC charging over-voltage
  Fault Solution: Disconnect the device in DC connection. Once the voltage turns to normal, the fault condition will be removed automatically.
• Fault Code: E10
  Fault Content: DC charging low-voltage
  Fault Solution: Disconnect the device in DC connection. Once the voltage turns to normal, the fault condition will be removed automatically.
• Fault Code: E11
  Fault Content: Battery input/output over-temperature
  Fault Solution: Disconnect all the devices. When the working temperature returns to the normal level, the fault code will be removed.

Additional Information

PowerSafe Management

❤️⚡ Guarantees against short circuit and over-charging for your power bank and devices.

Customer Service

For any questions about the product, please contact us at 1-888-782-5618 or support@energizerpowersolutions.com.

The product complies with FCC regulations, recycling standards, and battery disposal guidelines, as indicated by relevant symbols.

WARNING (California Proposition 65): This product can expose you to chemicals including Pb and Di(2-ethylhexyl) phthalate (DEHP), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.