Energizer PPS1500W2F Portable Power Station
Specifications
| Feature | Specification |
|---|---|
| Model Name | PPS1500W2F |
| Cell Type | LiFePO4 Lithium Iron Phosphate |
| Battery Capacity | 40Ah/ 38.4V, 1536Wh |
| AC Input | 220V-240V, 50Hz/60Hz, 1500W |
| AC Output | 2 x 220-240Vac 50Hz/60Hz (1800W Max.) |
| USB Output | 2 x 5V/3A, 9V/2A, 12V/1.5A (Total 36W Max.) |
| USB-C1 Output | PD 5V/3A, 9V/2.22A, 12V/1.67A (20W Max.) |
| USB-C2 Output | PD 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/5A (100W Max.) |
| Car Charger Outlet | 12V/10A Max. |
| Bypass Input | 2200W Max |
| Solar Panel Input | XT60 12V-90V (1200W Max.) |
| UPS | 0.01s |
| LED Light | 3W |
| Operating Temperature | -10~40C |
| Dimensions | 404(L)*218(W)*295(H) mm |
| Weight | 18kg 0.5kg |
| Made in | China |
Product Description
Pure Sine Wave Output
This product generates pure sine wave output, compatible with AC electric appliances that operate with a sinusoidal waveform (power <1800W). However, the product is intended for emergency situations only and cannot replace standard DC or AC power supplies for household appliances or digital products.
Package Content
- Portable Power Station x 1
- AC Charging Cable x 1
- User Manual x 1
Product Components
- 1. LCD Screen
- 2. DC Switch
- 3. Main Power Button
- 4. Light Switch
- 5. USB Switch
- 6. AC Switch
- 7. AC Charging Port
- 8. XT60 Input (Solar Panel and Car Charging)
- 9. Overload Protection Button
- 10. Battery Pack Interface
- 11. Cooling Fans
Display Interface Introduction
- 1. Main Charging
- 2. Total Input Power
- 3. Extra Battery Pack (S1, S2)
- 4. Main Engine Icon (M)
- 5. Power Percentage
- 6. Power Level Indicator
- 7. LED Light
- 8. Total Output Power
- 9. AC Output Status
- 10. XT60 Input Status
- 11. UPS
- 12. Charge/Discharge Time
- 13. High/Low Temperature
- 14. Fan Status
- 15. USB-C
- 16. Car Charger (12V) Output Status
- 17. USB-A
Screen Display Description
Power Display: When the product is charging, the battery progress bar rotates clockwise, and the battery level percentage increases. If the battery level is 0%, the icon flashes. Input and Output Status: When the product is operating, the screen displays total input power, total output power, and the corresponding working area cursor. Alarm Prompt: Refer to the troubleshooting table for details.
Troubleshooting
| Phenomenon | Cause | Processing Method |
|---|---|---|
| Output icon flashes and beeps | Output exceeds standard and is short-circuited | 1. Disconnect device and restart. 2. Test with different equipment. |
| Temperature warning icon flashes and beeps | Product temperature too high or too low | Remove device, turn off power. Wait for appropriate temperature. |
| AC connection icon flashes, product not charging | Charging cable poorly connected | Check cable connection and power supply. |
| Parallel light blinks | Parallel failure | Charge with lower capacity battery, or discharge with higher capacity battery (power difference <80%), then reconnect. |
Product Highlights
- Equipped with LiFePO4 battery, up to 1536Wh capacity (expandable to 4608Wh with additional packs).
- Pure sine wave AC output for compatibility with most electronics.
- Dual-way fast charging technology for a full charge in 1.5 hours.
- Versatile output interfaces including USB-A, Type-C PD3.0, and car charger.
- UPS mode with <10ms switchover time for seamless power transition.
- Multiple protection mechanisms for enhanced safety.
UPS Mode
This product functions as a backup uninterruptible power supply (UPS). When connected between a wall socket and an appliance with the product's power and AC switch ON, it enters UPS mode. AC mains power the appliance via a bypass circuit and charges the product. Ensure appliance power is below 1500W (100V-120V) or 1800W (220V-240V) to avoid overload protection.
Car/Vehicle Charging
Connect the car charging port to the product using the car charging cable while the car is running. Supports 12V/24V car chargers. Note: Ensure the car engine is running to prevent draining the car battery. Vehicle charging power is typically 90W-120W, resulting in longer charging times compared to AC mains charging.
Safety Precautions
- Do not short-circuit the product. Keep away from metal objects.
- Do not heat, incinerate, or immerse the product in water or liquids. Keep away from high ambient temperatures and direct sunlight.
- Keep away from humid and dusty places.
- Do not disassemble or reassemble the product.
- Do not drop, place heavy objects on, or subject the product to strong impacts.
- Some portable electronic devices may require setting to charge mode first. Refer to their user manuals.
- Keep out of reach of children.
- Do not cover the product with towels, clothing, or other items.
- Do not overcharge the product. Disconnect from power source immediately when fully charged.
- Keep away from TVs, radios, and other equipment during charging to avoid radio interference.
- If storing for a long time, disconnect the cable before storage.
- This product is NOT waterproof or dustproof. Avoid wet, sandy, or dusty environments.
PowerSafe Management & Customer Service
PowerSafe Management guarantees against short circuits and overcharging for your power bank and devices. For any product questions, contact Energizer at service@energizerpowerpacks.com.
©2024 Energizer. Energizer, Energizer Character, and certain graphic designs are trademarks of Energizer Brands, LLC and related subsidiaries, used under license by TennRich International Corp.
TennRich International Corp.
