Rev-A-Shelf Tiered Drawer System

Innovation through Organization™

Address: 12400 Earl Jones Way, Louisville, KY 40299

Customer Service: 800-626-1126

Tools Required

Screwdriver ?
Drill with 3/32" bit [3/32" drill bit]
#2 Phillips head screwdriver [#2 screwdriver]
Pencil [pencil]

Care and Maintenance

Clean with a damp cloth and wipe parts dry.

Limpie con un paño húmedo y seque las partes. / Nettoyez avec un linge humide et essuyez les pièces pour les sécher complètement.

Parts List

No.	Description	Qty.
A	Drawer Unit / Unidad de cajón / Bloc-tiroir	1*
B	Door-Mounting Kit / Figura 8 Soportes de montaje / Supports de montage en 8	1 or 2**
C	#6 x 1/2" Pan Head Screws / #6 x 1/2" Tornillos de cabeza plana / Vis à tête cylindrique #6 x 1/2 po	4
D	#8 x 5/8" Wood Screws / #8 x 5/8" Tornillos para madera / Vis à bois #8 x 5/8 po	10
E	BLUM Soft-Close Slides / Guías BLUM de cierre suave / Glissières BLUM à fermeture douce	2
F	Rear Brackets / Soportes traseros / Supports arrière	2
G	Locking Devices / Dispositivos de bloqueo / Dispositifs de verrouillage	2
H	Stabilizing Kit / Kit de estabilización / Trousse de stabilisation	1**
I	Spacer Kit / Kit de espaciadores / Trousse d'entretoises	1**

*Appearance varies depending on unit purchased / La apariencia varía dependiendo de la unidad comprada. / Le style varie selon le modèle acheté

**Dependent on unit purchased / Depende de la unidad comprada / Dépend de l'unité achetée

Installation Instructions

Step 1: Prepare Drawer Front

Remove the existing drawer box and slides from the cabinet, and flip over. Then, trace the bottom corners on the back side of the drawer front with a pencil. Remove the drawer front from the drawer box and set aside.

(Diagram shows tracing lines on the back of a drawer front.)

Step 2: Install Locking Devices

Place the Locking Devices (G) on the bottom of the Drawer Unit (A) as shown. Pre-drill hole locations using a 3/32" drill bit. Install the Locking Devices (G) using two #6 x 1/2" Pan Head Screws (C) per slide.

(Diagram shows attaching locking devices to the underside of the drawer unit with screws.)

Step 3: Attach Brackets to Drawer Unit

Using the Door-Mounting Kit(s) (B), install the brackets onto the front of the Drawer Unit (A) as shown.

(Diagram shows attaching brackets to the front of the drawer unit.)

Step 4: Attach Drawer Unit to Drawer Front

Align the bottom of the Drawer Unit (A) with the line drawn in Step 1. Pre-drill through the middle of each bracket. Attach the Drawer Unit (A) to the drawer front using screws from the Door-Mounting Kit(s) (B). Be careful not to drill through the drawer front.

(Diagram shows attaching the drawer unit to the prepared drawer front.)

Step 5: Install Slides and Rear Brackets

For Face Frame Cabinets: Attach the Rear Brackets (F) to the BLUM Soft-Close Slides (E). With the slides 1/8" back from the front edge, pre-drill and install using two #8 x 5/8" Wood Screws (D) per side. Then, use the provided measurements to attach the Rear Brackets (F) to the back of the cabinet using three #8 x 5/8" Wood Screws (D) per side.

For Frameless Cabinets: With the BLUM Soft-Close Slides (E) 1/8" back from the front edge, pre-drill and install using three #8 x 5/8" Wood Screws (D) per side. Note: A Spacer Kit (I) is included, if needed.

(Diagrams show detailed measurements for attaching rear brackets to face frame and frameless cabinets, and attaching slides to the cabinet interior.)

Step 6: Install Stabilizing Kit (If Applicable)

For 30" or wider units, follow the included directions and install the Stabilizing Kit (H).

(Diagram shows installation of the stabilizing kit.)

Step 7: Engage Drawer Unit

Place the Drawer Unit (A) on top of the BLUM Soft-Close Slides (E) and push back until you hear an audible click when fully engaged.

(Diagram shows sliding the drawer unit onto the cabinet slides.)

Video Tutorial

For a video tutorial, visit: www.rev-a-shelf.com/videos ▶️ [video tutorial]

	Rev-A-Shelf Door-Mounting Kit Installation Guide \| Model I-5WB-DMKIT-0725 Official installation instructions for the Rev-A-Shelf Door-Mounting Kit (Model I-5WB-DMKIT-0725). Learn how to attach door-mount brackets to cabinet slides and doors for improved organization. Includes parts list, tools required, and step-by-step guidance.
	Rev-A-Shelf Craftsman Collection Deep Drawer Divider Insert Installation Guide Step-by-step installation instructions and parts list for the Rev-A-Shelf Craftsman Collection Deep Drawer Divider Insert. Includes care and maintenance tips.
	Rev-A-Shelf Cutlery Tray Installation Guide Comprehensive installation instructions for the Rev-A-Shelf Cutlery Tray (Model I-CT-0825), detailing measurement, trimming, and care. Enhance your kitchen drawer organization with this guide.
	Rev-A-Shelf Heavy-Duty Mixer Lift Installation Instructions Detailed installation guide for the Rev-A-Shelf Heavy-Duty Mixer Lift, including tools required, parts list, preparation steps, and adjustment instructions for optimal performance.
	Rev-A-Shelf Door-Mount Kit Installation Instructions Comprehensive guide for installing the Rev-A-Shelf Door-Mount Kit, detailing parts, tools, and step-by-step assembly for cabinet doors.
	Rev-A-Shelf Vanity/Base Cabinet Filler Installation Instructions Step-by-step guide for installing the Rev-A-Shelf Vanity/Base Cabinet Filler, including tools required, assembly time, and maintenance tips.
	Rev-A-Shelf Tip-Out Tray System Installation Instructions Comprehensive installation guide for the Rev-A-Shelf Tip-Out Tray System, covering hinge types, tray assembly, and mounting for polymer and slim series trays. Includes tools required, helpful hints, and customer support contact.
	Rev-A-Shelf 53WC Double Waste Container Specifications and Dimensions Comprehensive specifications and dimensional data for the Rev-A-Shelf 53WC Double Waste Container, featuring two 50-quart polypropylene bins, full-extension undermount slides, and soft-close functionality.