KALLAX Shelving Unit Assembly Instructions

Safety Warning

WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

עברית אזהרה! נפילת הרהיט עלולה לגרום לפגיעה גופנית חמורה או קטלנית. על מנת למנוע את נפילת הרהיט, יש לקבע אותו לקיר באמצעות אבזרי הקיבוע הכלולים באריזה.

הברגים לקיבוע אינם כלולים מכיוון שיש להתאים אותם לחומר ממנו עשוי הקיר המיועד. לקבלת מידע נוסף על הברגים המתאימים לקיבוע, אנא פנו לאיש מקצוע. קראו ופעלו לפי ההוראות המפורטות בזהירות.

Tools Required

The following tools are recommended for assembly:

Screwdriver (Phillips head)
Hammer
Spirit level
Pencil

Parts List

The following parts are included in the package:

8x Dowel (Part #104321, #104322)
14x Screw (Part #101339)
1x Allen key (Part #100092)
2x Wall bracket (Part #115753, #103693)
2x Corner bracket (Part #115754, #118673, #118225, #119509)
4x Screw (Part #100372)
1x Long screw (Part #121030)
2x Screw (Part #100092)
2x Screw (Part #100372)
2x Screw (Part #101339)
1x Plastic cover (Part #109142)

Assembly Steps

Attach the side panels to the top and bottom panels using the provided dowels and screws. Ensure the panels are aligned correctly.
Diagram shows attaching side panels to top and bottom panels with dowels and screws.
Insert the shelf dividers into the pre-drilled holes. Use a hammer to gently tap them into place if needed.
Diagram shows inserting shelf dividers and tapping them with a hammer.
Attach the back panels to the assembled frame using the provided screws. Ensure the back panels are flush with the edges.
Diagram shows attaching back panels with screws.
Secure the unit by attaching the wall mounting brackets to the top of the unit using the provided screws. Ensure the brackets are firmly attached.
Diagram shows attaching wall mounting brackets to the top of the unit.
Position the unit against the wall where you intend to place it. Use a spirit level to ensure it is straight.
Diagram shows positioning the unit against the wall and checking with a spirit level.
Mark the wall through the holes in the wall mounting brackets. Ensure the marks are level.
Diagram shows marking the wall through the bracket holes.
Drill holes in the wall at the marked locations. Insert appropriate wall plugs (not included) if necessary.
Diagram shows drilling holes in the wall and inserting wall plugs.
Align the wall mounting brackets with the holes in the wall and secure the unit to the wall using suitable screws (not included).
Diagram shows securing the unit to the wall with screws.
Attach the plastic covers over the screw heads on the wall brackets for a finished look.
Diagram shows attaching plastic covers.

Final Check

Ensure all screws are tightened and the unit is securely attached to the wall. Check for stability.

Product Information

Product Name: KALLAX Shelving Unit

Manufacturer: IKEA

Article Number: AA-1009451-9

	KALLAX Shelving Unit Assembly Instructions Assembly instructions for the IKEA KALLAX shelving unit, including safety warnings and step-by-step guidance.
	KALLAX Shelving Unit Assembly Instructions Detailed instructions for assembling the IKEA KALLAX shelving unit, including safety warnings and part identification.
	KALLAX Shelf Unit Assembly Instructions Detailed assembly instructions for the IKEA KALLAX shelf unit, including safety warnings and step-by-step guidance for building and securing the furniture.
	KALLAX Shelving Unit Assembly Instructions and Safety Guide Comprehensive guide for assembling the IKEA KALLAX shelving unit, including important safety warnings about furniture tip-over and wall anchoring. Learn how to safely build and install your KALLAX unit.
	KALLAX Shelving Unit Assembly Instructions Assembly instructions for the IKEA KALLAX shelving unit, including essential safety warnings about tip-over prevention and detailed, step-by-step guidance for building and securely wall-mounting the unit.
	KALLAX Shelving Unit Assembly Instructions This document provides assembly instructions for the IKEA KALLAX shelving unit. It includes warnings, a list of parts, and step-by-step guidance for putting the unit together and securing it to the wall.
	KALLAX Shelving Unit Assembly Instructions Step-by-step guide for assembling the IKEA KALLAX shelving unit, including safety warnings and wall attachment instructions.
	KALLAX Shelving Unit Assembly Instructions Detailed assembly instructions for the IKEA KALLAX shelving unit, including safety warnings and step-by-step guidance.