KALLAX Shelving Unit

Important Safety Information

WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screws(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

Tools Required

The following tools are recommended for assembly:

• Screwdriver (Phillips head)
• Hammer
• Level
• Measuring tape

Parts List

The following parts are included in the package:

• 8x Screws (104321, 104322)
• 54x Dowels (101339)
• 4x Screws (115753)
• 1x Allen key (100372)
• 1x Wall attachment bracket (10091413)
• 2x L-brackets (10091413)
• 2x Wall mounting plates (103693)
• 2x Corner brackets (115754)
• 2x Corner brackets (118814)
• 2x Corner brackets (119509)
• 2x Corner brackets (118673)
• 2x Corner brackets (118225)
• 10x Circular caps (123550)
• 2x Wall attachment brackets (121030)
• 2x Wall attachment brackets (100092)

Assembly Steps

1. Step 1: Assemble the frame. Insert dowels (101339) into the designated holes on the side panels. Attach the top and bottom panels to the side panels using screws (104321, 104322) and the Allen key (100372).
2. Step 2: Insert the horizontal shelf supports. Use 6 dowels (101339) for each support.
3. Step 3: Insert the vertical shelf dividers. Ensure the arrows on the dividers point upwards.
4. Step 4: Attach the remaining horizontal shelf supports using 12 dowels (101339).
5. Step 5: Slide in the back panels.
6. Step 6: Insert dowels (101339) into the shelf dividers.
7. Step 7: Insert the vertical shelf dividers.
8. Step 8: Slide in the back panels.
9. Step 9: Insert dowels (101339) into the shelf dividers.
10. Step 10: Insert the vertical shelf dividers.
11. Step 11: Slide in the back panels.
12. Step 12: Insert dowels (101339) into the shelf dividers.
13. Step 13: Insert the vertical shelf dividers.
14. Step 14: Attach the L-brackets to the top of the unit using screws (100092).
15. Step 15: Secure the unit to the wall using the provided wall attachment brackets (121030) and screws (104321, 104322). Ensure you use appropriate wall plugs for your wall type.
16. Step 16: Insert dowels (101339) into the shelf dividers.
17. Step 17: Slide in the back panels.
18. Step 18: Attach the wall attachment brackets to the unit using screws (104321, 104322).
19. Step 19: Attach the circular caps (123550) to cover the screw heads.
20. Step 20: Position the unit against the wall. Attach the wall attachment brackets (10091413) to the unit and the wall using screws (100372).
21. Step 21: Secure the unit to the wall using the provided wall attachment brackets (103693) and screws.
22. Step 22: Attach the wall attachment brackets (121030) to the unit and the wall using screws (104321, 104322).
23. Step 23: Secure the unit to the wall using the provided wall attachment brackets (121184, 118673, 119509, 118225, 118814, 115754) and screws (104321, 104322).

Wall Attachment

It is crucial to secure the KALLAX shelving unit to the wall to prevent tipping. Follow the detailed instructions provided in the assembly steps to correctly install the wall attachment devices. Ensure you use appropriate wall fixings for your specific wall type (e.g., drywall, concrete, wood). If you are unsure, consult a professional.