KALLAX Shelving Unit Assembly Instructions

Important Safety Information

WARNING!

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

The following languages are also available for safety warnings: Español, Portugues, 中文, 繁中, 한국어, 日本語, Bahasa Indonesia, Bahasa Malaysia, عربي, ไทย, Tiếng Việt.

Tools and Parts Overview

The following tools are recommended for assembly:

• Screwdriver (Phillips head)
• Hammer
• Level

The following parts are included in the package:

• 8x Screws (Part #104321, #104322)
• 80x Dowels (Part #101339)
• 4x Screws (Part #100372)
• 12x Caps (Part #153550)
• 2x Brackets (Part #115753)
• 2x Brackets (Part #103693)
• 2x Brackets (Part #118225)
• 2x Brackets (Part #118673)
• 2x Brackets (Part #119509)
• 1x Tool (Part #100092)
• 1x Tool (Part #121030)
• 4x Shelves
• 1x Back panel
• 20x Small square panels

Assembly Steps

Follow the numbered steps carefully. Ensure all parts are correctly aligned before proceeding.

1. Step 1: Assemble the base frame. Insert dowels into the side panels and connect them with the base panel. Use screws to secure. [Image: Two side panels being connected to a base panel with dowels and screws.]
2. Step 2: Insert dowels into the shelves. Attach the shelves to the side panels using dowels and a hammer to tap them in. [Image: Shelves being inserted into the side panels with dowels.]
3. Step 3: Insert the vertical dividers. Slide the dividers into the pre-drilled holes in the shelves. [Image: Vertical dividers being inserted into the shelves.]
4. Step 4: Attach the top panel. Insert dowels into the top panel and secure it to the side panels and vertical dividers. [Image: Top panel being attached to the assembled structure.]
5. Step 5: Continue adding shelves and dividers as per the diagram. [Image: Partially assembled unit with more shelves and dividers being added.]
6. Step 6: Secure the structure with dowels. [Image: Dowels being inserted into the unit for reinforcement.]
7. Step 7: Insert more vertical dividers. [Image: More vertical dividers being inserted.]
8. Step 8: Continue adding shelves. [Image: More shelves being added.]
9. Step 9: Secure the structure with dowels. [Image: Dowels being inserted into the unit.]
10. Step 10: Insert more vertical dividers. [Image: More vertical dividers being inserted.]
11. Step 11: Continue adding shelves. [Image: More shelves being added.]
12. Step 12: Secure the structure with dowels. [Image: Dowels being inserted into the unit.]
13. Step 13: Insert more vertical dividers. [Image: More vertical dividers being inserted.]
14. Step 14: Continue adding shelves. [Image: More shelves being added.]
15. Step 15: Secure the structure with dowels. [Image: Dowels being inserted into the unit.]
16. Step 16: Insert more vertical dividers. [Image: More vertical dividers being inserted.]
17. Step 17: Attach the side panels. [Image: Side panels being attached to the unit.]
18. Step 18: Secure the unit to the wall using the provided brackets and screws. [Image: Wall brackets being attached to the unit and the wall.]
19. Step 19: Secure the unit to the wall using the provided brackets and screws. [Image: Wall brackets being attached to the unit and the wall.]
20. Step 20: Attach the final side panel. [Image: Final side panel being attached.]
21. Step 21: Secure the unit to the wall using the provided brackets and screws. [Image: Wall brackets being attached to the unit and the wall.]
22. Step 22: Attach the caps to cover the screw heads. [Image: Caps being placed over screw heads.]
23. Step 23: Carefully lift the unit upright. [Image: Two people lifting the assembled unit.]
24. Step 24: Position the unit in its desired location. [Image: Two people tilting the unit to move it.]
25. Step 25: Attach the wall mounting brackets to the top of the unit. [Image: Wall brackets being attached to the top of the unit.]
26. Step 26: Secure the unit to the wall using the provided brackets and screws. Ensure the unit is level. [Image: Wall brackets being attached to the wall with screws.]
27. Step 27: Secure the unit to the wall using the provided brackets and screws. [Image: Wall brackets being attached to the unit and the wall.]
28. Step 28: Secure the unit to the wall using the provided brackets and screws. [Image: Wall brackets being attached to the unit and the wall.]

Final Check

Ensure all connections are secure and the unit is stable. If you have any issues, refer back to the instructions or contact IKEA for assistance.