Introduction
Thank you for purchasing our Floor Lamp. This lamp can be used as a reading lamp. Please read the following instructions carefully before use.
Parameters
| Model | B31-543V70(FLE-042-F2-C58-K1-ee-fff) |
| Input Voltage | 100V-240V~50/60HZ |
| Material | Iron+PC |
| Dimmable | Yes |
| Switch | Remote control + Touch Control |
| Power | Max 42W |
| CCT | CCT 2700K-6500K |
Cautions
- If the remote control can't control the lamp, please try to match the codes. If you still can't control the lamp after the code is matched, please contact us as soon as possible.
- Please make sure that the voltage is 100-240V. This product can only be used between 100-240V.
- Unplug before cleaning.
Product Dimensions and Adjustability
The floor lamp has a height of 68.89 inches. The base diameter is 9.84 inches. The lamp head is adjustable 180° up/down, and the pole allows for 350° rotation. The power cord is 1.8M (5.9FT) long.
Package List
- A. Lamp x 1
- B. Base x 1
- C. Power Adapter with Cable x 1
- H. Remote Control x 1
Assembling
- Connect the tube to the lamp head clockwise.
- Connect the tube to the other tubes clockwise.
- Connect the tube to the lamp base clockwise. After installation, plug in the adapter to use touch control or remote control.
Touch Control Functions
Power: Short touch: Master Lamp ON/OFF; Long touch: Sub-light ON/OFF.
Control Master Lamp: Short Press: Change color temperature; Long Press: Change brightness.
Control Sub-light: Short Press: Change color temperature; Long Press: Change brightness.
Usage Instructions
- Connect the power supply.
- Press the switch button on the remote control.
- Press the [mode shift button] button to control the main-lamp or sub-lamp.
CCT (Color Temperature): Press Color Temperature +/- buttons. Short press for graded dimming, long press for stepless dimming.
Brightness: Press Brightness +/- buttons. Short press for graded dimming, long press for stepless dimming.
Remote Control Layout
The remote control features the following functions:
- Main-Lamp: ON/OFF [power symbol]
- Sub-Lamp: ON/OFF [power symbol]
- Brightness + [brightness up symbol]
- Brightness - [brightness down symbol]
- Shift Between: Main Lamp & Sub-Lamp [mode shift symbol]
- Color Temperature + [color temperature up symbol]
- Color Temperature - [color temperature down symbol]
- Reading Mode [reading mode symbol]
- Working Mode [working mode symbol]
- 1-Hour Timing [timer symbol]
- Night Mode [night mode symbol]
- Breastfeeding Mode [breastfeeding mode symbol]
Remote Control Matching
Ensure the remote control matches the lamp. Plug in the adapter and use the remote. If it does not work, re-match them.
Tips On Remote Control
- The remote control distance is within 49.2ft.
- The remote controller requires two AAA batteries.
- Pairing is not required before use.
- The back of the remote controller is magnetic and can attach to metal surfaces like the lamp pole.
- If remote control fails: Re-pair the remote and lamp.
- Turn on the power switch.
- Unplug and reconnect the power cord 5 times. The floor lamp will flash quickly for 3-5 seconds.
- Within 1 minute, long press the "Main-Lamp ON/OFF" button on the remote for about 3 seconds until the light flickers twice. The remote is re-paired.
- To cancel pairing: Turn the power off and on repeatedly (off-on-off-on-off-on-off-on-off-on). The light will flicker, and cancellation is complete.
- The remote has a magnet for attachment to metal surfaces.
Cautions
- For indoor use only.
- Keep away from children and animals.
- Do not use in bathrooms or damp places.
- Place on a flat surface away from flammable materials.
- Ensure the lamp is switched off before cleaning or replacing the bulb.
- Allow the lamp to cool down before replacing the bulb.
- Do not pull the plug with wet hands.
- Damaged supply cords must be replaced by a qualified engineer.
- Do not touch the light bulb while the fixture is on.
- Never look directly at a lit bulb.
- Notice: Do not repeatedly turn the light on and off.
Care Instructions
- Unplug lamp before cleaning.
- Wipe with a soft, dry cloth or static duster.
- Avoid harsh chemicals or abrasive cleaners.
Contact and Importer Information
For any questions, please contact our customer care center:
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer: MH STAR UK LTD
Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH.
Made in China.
Recycling Information
This appliance, its accessories, cords, and batteries are recyclable. Dispose of them at collection points in stores or at waste disposal facilities. Find collection points at www.quefairedemesdechets.fr. Prioritize repair or donation of your appliance!
