HOMCOM Tripod Floor Lamp
Model: B31-162V70, B31-162V90
Specifications
| Model | B31-162V70_B31-162V90 |
|---|---|
| Max Power | 40W |
| Adapter Input | 230V/50HZ |
Important Information & Cautions
Important: Retain for future reference. Read carefully.
- For indoor use only.
- Keep out of reach of children and animals.
- Do not use in the bathroom or damp places.
- Place the lamp on a flat surface and ensure it is placed away from any flammable materials.
- Before cleaning the lamp, ensure it is switched off.
- Before replacing the bulb, ensure the plug has been removed from the socket and the lamp has cooled down.
- Do not pull the plug out of the socket with wet hands.
- If the supply cord is damaged, it must only be replaced by a qualified engineer.
- Do not touch light bulb while fixture is turned on.
- Never look directly at a lit bulb.
- Notice: Do not repeatedly turn the light on and off.
Care Instructions
- Unplug lamp before cleaning.
- Wipe clean with a soft, dry cloth or static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners as they may cause damage to the fixture's finish.
Assembly Instructions
Note: Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
Parts List:
- A x 1: Base ring
- B x 1: Central hub
- C x 1: Lampshade fabric
- D x 3: Legs
- E x 3: Leg supports/connectors
- F x 1: Lamp holder assembly with cord
- G x 12: M6*12 screws
- I x 9: M6*16 screws
Assembly Steps:
- Step 1: Assemble the lampshade. Roll the lampshade fabric (C) and attach it to the base ring (A) and the central hub (B).
- Step 2: Attach the lamp holder assembly (F) to the central hub (B).
- Step 3: Attach the three legs (D) to the central hub (B) using the leg supports (E) and M6*12 screws (G). Secure the leg supports (E) to the legs (D) using M6*16 screws (I).
The final assembly results in a tripod floor lamp with a lampshade and a central lamp holder.
Bulb Information
Bulb Type: LED
Base: E27 (medium) base (Not included)
Warning: DO NOT EXCEED THE SPECIFIED WATTAGE.
Contact Information
For any questions, please contact the customer care center. Contact details vary by region:
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk
- ES: 0034-931294512, atencioncliente@aosom.es
- FR: 0033-1-84166106, aosom@mhfrance.fr
- PT: 0034-931294512, info@aosom.pt
- DE: 0049-0(40)-88307530, service@aosom.de
- IT: 0039-0249471447, clienti@aosom.it
All products are manufactured in China.
