MC3300 / MC3300X / MC3300AX Accessories Guide

I. Accessories that POWER devices

1 Cradles

• 1.1 Single-slot cradles

  Single-slot charge / USB cradle
  SKU# CRD-MC33-2SUCHG-01
  Single-slot USB cradle for charging one MC3300 / MC3300x / MC3300ax device and its spare battery.
  

  • Allows USB communication to the device with an additional micro-USB cable.
  • Supports fast-charging for the MC3300 / MC3300x / MC3300ax device and its high-capacity battery (5200mAh) in about 3.5 hours, and the extended-capacity battery (7000mAh) in 4.5 hours.
  • LED notification of spare battery charging status.
  • Sold separately: Power Supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-388A1-01, micro-USB cable SKU# 25-124330-01R, and country-specific three-wire AC cable.

  Single-slot charge / USB cradle kit
  SKU# KT-CRD-MC33-2SUCHG-01
  Single-slot USB cradle kit for charging one MC3300 / MC3300x / MC3300ax device and its spare battery.
  

  • Allows USB communication to the device with an additional micro-USB cable.
  • Supports fast-charging for the MC3300 / MC3300x / MC3300ax device and its high-capacity battery (5200mAh) in about 3.5 hours, and the extended-capacity battery (7000mAh) in 4.5 hours.
  • LED notification of spare battery charging status.
  • Includes: Power Supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-388A1-01
  • Sold separately: Micro-USB Cable SKU# 25-124330-01R, and country-specific three-wire AC cable.

• 1.2 Multi-slot cradles

  Five-Slot charger cradle
  SKU# CRD-MC33-5SCHG-01
  Five-slot charge-only cradle, charges up to five MC3300 / MC3300x / MC3300ax devices.
  

  • Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
  • Sold separately: Power Supply SKU# PWR-BGA12V108WOWW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable.

  Four-Slot charger cradle with spare battery charging
  SKU# CRD-MC33-4SC4BC-01
  Four-slot charge-only cradle for MC3300 / MC3300x / MC3300ax devices and their four spare batteries.
  

  • Supports fast-charging for the MC3300 / MC3300x / MC3300ax device and its high-capacity battery (5200mAh) in about 3.5 hours, and the extended-capacity battery (7000mAh) in 4.5 hours.
  • Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
  • Sold separately: Power Supply SKU# PWR-BGA12V108WOWW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable.

  Five-Slot Ethernet charger cradle
  SKU# CRD-MC33-5SETH-01
  Five-slot charge / Ethernet cradle for up to five MC3300 / MC3300x / MC3300ax devices with network speeds of up to 1 Gbps.
  

  • Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
  • Sold separately: Power Supply SKU# PWR-BGA12V108WOWW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable.

  Five-Slot Ethernet charger cradle with spare battery charging
  SKU# CRD-MC33-4SE4BC-01
  Four-slot charge-only cradle for MC3300 / MC3300x / MC3300ax devices and their four spare batteries with network speeds of up to 1 Gbps.
  

  • Supports fast-charging for the MC3300 / MC3300x / MC3300ax device and its high-capacity battery (5200mAh) in about 3.5 hours, and the extended-capacity battery (7000mAh) in 4.5 hours.
  • Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
  • Sold separately: Power Supply SKU# PWR-BGA12V108WOWW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable.

• 1.3 Adapter cup

  Adapter charge-only cradle cup for legacy cradles
  SKU# ADP-MC33-CRDCUP-01
  MC3300 / MC3300x / MC3300ax adapter charge-only cradle cup for MC30 / MC31 / MC32 legacy cradles.
  

  • Charges standard rate from 0-90% in about 3 hours.
  • One cup is required per slot in a cradle.

2 Batteries and additional charging accessories

• 2.1 Spare Li-ion batteries

  High-capacity battery with PowerPrecision Plus
  SKU# BTRY-MC33-52MA-01
  5,200 mAh high-capacity battery with PowerPrecision Plus.
  

  • Premium-grade battery cells with longer lifecycle.
  • Obtain advanced battery state-of-health and state-of-charge information including charge level and battery age based on usage patterns.
  • Designed to meet rigorous controls, standards and help prevent overcharging.
  • Also available as a 10-pack 10 batteries- SKU# BTRY-MC33-52MA-10.
  • Also available in India - PowerPrecision+ Lithium-Ion battery pack, 5200mAh, provides advanced State of Charge and State of Health – SKU# BTRY-MC33-52MA-IN

  Extended-capacity battery with PowerPrecision Plus
  SKU# BTRY-MC33-70MA-01
  7,000 mAh extended-capacity battery with PowerPrecision Plus.
  

  • Premium-grade battery cells with longer lifecycle.
  • Obtain advanced battery state of health information including charge level and battery age based on usage patterns.
  • Designed to meet rigorous controls, standards and help prevent overcharging.
  • Also available as a 10-pack 10 batteries- SKU# BTRY-MC33-70MA-10.
  • Also available in India - PowerPrecision+ Lithium-Ion battery pack, 7000mAh, provides advanced State of Charge and State of Health, supports fast-charge. SKU# BTRY-MC33-70MA-IN

  Bluetooth enabled extended-capacity battery with PowerPrecision Plus
  SKU# BTRY-MC33-7BLE-01
  7,000 mAh Bluetooth extended-capacity battery with PowerPrecision Plus.
  

  • Premium-grade battery cells with longer lifecycle.
  • Obtain advanced battery state of health information including charge level and battery age based on usage patterns.
  • Designed to meet rigorous controls, standards and help prevent overcharging.
  • BLE beacon allows device with this battery to be located even if powered off using Zebra Device Tracker.
  • Sold separately: Zebra Device Tracker licenses for either 1-year SKU# SW-BLE-DT-SP-1YR or 3-years SKU# SW-BLE-DT-SP-3YR.
  • The secondary BLE beaconing functionality is only supported through MC3300x, MC3300ax devices.
  • Also available as a 10-pack 10 batteries- SKU# BTRY-MC33-7BLE-10.
  • Also available in India - PowerPrecision+ Lithium-Ion battery pack, 7000mAh, with Secondary BLE Beacon. – SKU# BTRY-MC33-7BLE-IN.

• 2.2 Spare battery chargers

  Four-slot spare battery charger
  SKU# SAC-MC33-4SCHG-01
  Spare battery charger to charge any four MC32xx ; MC3300 / MC3300x / MC3300ax spare batteries.
  

  • Supports fast-charging for the standard battery from 0-90% in about 2 hours, the high-capacity battery in about 3.5 hours, and the extended-capacity battery in 4.5 hours.
  • Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01 for four chargers or could be used standalone.
  • Sold separately: Power Supply SKU# PWR-BGA12V50WOWW, DC cable SKU# CBL-DC-388A1-01, and country-specific AC cable.

  20-slot spare battery charger
  SKU# SAC-MC33-20SCHG-01
  Spare battery charger to charge any 20 MC32xx ; MC3300 / MC3300x / MC3300ax spare batteries.
  

  • Supports standard-charging for the standard battery from 0-90% in about 3 hours, the high-capacity battery in about 5.5 hours, and the extended-capacity battery in 4.5 hours.
  • Mounting options for standard 19-inch rack systems using mounting accessory SKU# BRKT-SCRD-SMRK-01.
  • Sold separately: Power Supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, mounting accessory SKU# BRKT-SCRD-SMRK-01, and country-specific AC cable.

• 2.4 Additional Charging Accessories

  Cigarette lighter adapter plug
  SKU# CHG-AUTO-USB1-01
  USB cigarette lighter adapter plug.
  

  • Used with USB communication / charging cable adapter SKU# CBL-MC33-USBCHG-01 to charge in-vehicle.
  • Includes two USB Type A ports providing higher current (5V, 2.5A) for faster charging.
  • Sold separately: USB communication / charging cable adapter SKU# CBL-MC33-USBCHG-01

  USB communication / charging cable
  SKU# CBL-MC33-USBCHG-01
  USB charge / communications cable adapter.
  

  • USB cable provides both USB communications and charging support with a USB-C connector.
  • The cable length is 60 inches.
  • Requires: Country-specific USB Power Supply for indoor use and USB cigarette lighter adapter SKU# CHG-AUTO-USB1-01 for in-vehicle use.

  USB communication / charging cable
  SKU# CBL-MC33-USBCHG-02
  USB charge / communications cable adapter.
  

  • USB cable provides both USB communications and charging support with a USB-C connector.
  • The cable length is 36 inches.
  • Requires: Country-specific USB Power Supply for indoor use and USB cigarette lighter adapter SKU# CHG-AUTO-USB1-01 for in-vehicle use.

  Micro-USB to USB-A cable
  SKU# 25-124330-01R
  Micro-USB to USB-A active-sync cable allows for active-sync cable.
  

  • To use with single-slot communication cradles.
  • The cable length is 48 inches.

3 Power supply, cables, and adapters

Power supply, cables, and adaptors

Country-specific AC line cords: grounded, 3-prong

Country-specific AC line cords: ungrounded, 2-prong

II. Accessories that ENABLE productivity solutions

4 Styluses

• Fiber tipped stylus

  SKU# SG-STYLUS-TCX-MTL-03
  Set of three fiber tipped stylus.
  

  • Heavy-duty and made from stainless steel / brass. No plastic parts - real pen feel. Can be used in rain.
  • Micro-knit, hybrid-mesh, fiber tip provides silent, smooth gliding use. 5" length.
  • Big improvement over rubber tipped or plastic tipped stylus.
  • Compatible with all capacitive touch screen devices.
  • Tether to device or hand strap using SKU# SG-TC5NGTC7NG-TETHR-03.

• Capacitive stylus

  SKU# SG-TC7X-STYLUS1-03
  Set of three capacitive styluses optimized for enterprise durability.
  

  • Made of conductive carbon-filled plastic material with 5mm tip. 3.5″ length.
  • Can be stored in loop of hand strap or holster.
  • Also available as a 50-pack - 50 styluses— SKU# SG-TC7X-STYLUS-50.

• Capacitive stylus with coiled tether

  SKU# SG-TC7X-STYLUS-03
  Set of three capacitive styluses with coiled tether.
  

  • Includes: Capacitive stylus SKU# SG-TC7X-STYLUS-03 and coiled tether SKU# KT-TC7X-TETHR1-03.
  • Also available as a 6-pack - 6 styluses and 6 coiled tethers— SKU# SG-TC7X-STYLUS-06.

5 Trigger handle

• Trigger handle for MC33 straight shooter

  SKU# SG-TC7X-STYLUS-03
  Trigger handle for MC33 straight-shooter.
  

  • Configures straight-shooter to be used as a gun handle device and trigger handle mechanically presses the left trigger button on the MC33 when trigger handle is pulled.

6 Mounting and Headsets

• Un-powered forklift mount

  SKU# MNT-MC33-FLCH-01
  Allows installing the device on a roll bar or square surface of a forklift.
  

  • Sold separately: RAM double socket arm for 1-inch ball SKU# MNT-RAM-B201U, RAM forklift clamp 2.5-inch max width square rail base with 1-inch ball SKU# MNT-RAM-B247U25.

• RAM mount arm

  SKU# MNT-RAM-B201U
  RAM double socket arm for 1-inch ball.
  

  • Used with un-powered forklift mount SKU# MNT-MC33-FLCH-01
  • Uses RAM mount P/N SKU# RAM-B-201U

• RAM mount base

  SKU# MNT-RAM-B247U25
  RAM forklift clamp 2.5-inch max width square rail base with 1 inch ball
  

  • Used with un-powered forklift mount SKU# MNT-MC33-FLCH-01 and attaches to square shaped post of forklift.
  • Uses RAM mount P/N SKU# RAM-B-201U

• Rack mounting for space optimization

  SKU# BRKT-SCRD-SMRK-01
  Rack / wall mounting bracket, allows to install the 16-slot battery charger or up to four 4-slot battery chargers on a wall or a 19″ server rack.

• Rugged wired headset with over-the-head headband

  SKU# HS3100-OTH
  HS3100 Rugged Bluetooth headset with over-the-head headband. Included HS3100 boom module and HSX100 OTH headband module

• Rugged wired headset with behind-the-neck headband (left).

  SKU# HS3100-BTN-L
  HS3100 Rugged Bluetooth headset with behind-the-neck headband (left).

III. Accessories that PROTECT devices

7 Rubber boots

• Rubber boot for MC33 brick unit

  SKU# SG-MC33-RBTS-01
  Rubber boot for MC33 brick units.
  

  • Compatible with fabric holsters
  • Boot must be removed before inserting into cradles.

• Rubber boot for MC33 turret head scanner unit

  SKU# SG-MC33-RBTRD-01
  Rubber boot for MC33 turret head scanner.
  

  • Compatible with fabric holsters
  • Boot must be removed before inserting into cradles.

• Rubber boot for MC33 gun unit

  SKU# SG-MC33-RBTG-01
  Rubber boot for MC33 with or without laser and imager gun units.
  

  • Compatible with fabric holsters.
  • Boot must be removed before inserting into cradles.

• Rubber boot for MC33 series RFID unit

  SKU# SG-MC33-RBTG-02
  Rubber boot only for MC33 series RFID unit.
  

  • Includes holder for optional stylus (stylus not included) and tether point for stylus tether.
  • Compatible with fabric holsters
  • Boot must be removed before inserting into cradles.

• Half rubber boot for MC33 series RFID unit

  SKU# SG-MC33-RBTG-03
  Half rubber boot only for MC33 series RFID unit.
  

  • Includes holder for optional stylus (stylus not included) and tether point for stylus tether.
  • Compatible with fabric holsters
  • Boot must be removed before inserting into cradles.

8 Fabric holsters, and other accessories

• Rigid holster

  SKU# SG-MC33-RDHLST-01
  Rigid holster, secures to a belt.
  

  • Not compatible with MC33 RFID units or devices with rubber boot.

• Fabric holster

  SKU# SG-MC3X-SHLSTB-01
  Fabric holster, secures to a belt or a shoulder strap for brick / straight-shooter or rotating head configurations.
  

  • Compatible with devices with or without rubber boot.
  • Includes: Shoulder strap SKU# 58-40000-007R.

• Fabric holster for gun configuration

  SKU# SG-MC3021212-01R
  Fabric holster for gun configurations, secures to a belt or a shoulder strap. Allows to carry the gun device on the hip or cross-body.
  

  • Compatible with devices with or without rubber boot.
  • Sold separately: Shoulder strap SKU# 58-40000-007R or belt SKU# 11-08062-02R.

• Replacement buckle for lanyard

  SKU# SG-MC33-LNYBK-01
  Replacement buckle for lanyard.
  

  • Used with lanyard SKU# SG-MC33-LNYDB-01.

• Protective cup

  SKU# SG-MC33-RBTRT-01
  Protective cup for MC33 turret head scanner.
  

  • Typically ordered with boot for turret head scanner SKU# SG-MC33-RBTRD-01.

9 Hand straps, shoulder strap, belt, lanyard, and screen protector

• Replacement gun hand strap

  SKU# SG-MC33-HDSTPG-01
  Replacement gun hand strap.
  

  • Included with MC3300 gun, MC3300 RFID, and MC3300x RFID but not MC3300x gun, or MC3300ax gun units.

• Shoulder strap

  SKU# 58-40000-007R
  Universal shoulder strap for fabric holster.
  

  • Extends from 22 to 55 inches and is 1.5 inches wide.

• Belt for holster

  SKU# 11-08062-02R
  Universal belt for fabric holster.
  

  • Extends 48 inches and is 2 inches wide.

• Replacement brick hand strap

  SKU# SG-MC33-HDSTPB-01
  Protective boot for gun configurations, protects the device from wear and tear.
  

  • Strap included with MC3300 and MC3300x brick units.
  • Includes loop for storing optional stylus.

• Lanyard

  SKU# SG-MC33-LNYDB-01
  Lanyard only for MC3300 brick styles.
  

  • Lanyard can be worn cross-body or can be attached to a belt SKU# 11-08062-02R.

• Glass screen protector

  SKU# MISC-MC33-SCRN-01
  Set of five tempered glass screen protectors..
  

  • Includes alcohol wipes, cleaning cloth, and instructions needed for screen protector installation.

10 Stylus tethers

• Stylus tether

  SKU# SG-TC5NGTC7NG-TETHR-03
  Stylus tether – pack of 3.
  

  • Can be attached to device tower bar.
  • When hand strap is used, tether should attach to hand strap SKU# SG-NGTC5TC7-HDSTP-03 directly (not to terminal towel bar).
  • String type tether prevents loss of stylus.

• Stylus coiled tether replacement

  SKU# KT-TC7X-TETHR1-03
  Set of three coiled tether for stylus to replace previously lost or damaged tethers.
  

  • Not recommended when using fiber tipped stylus SKU# SG-STYLUS-TCX-MTL-03

• Stylus coiled tether replacement

  SKU# SG-ET5X-SLTETR-01
  Coiled tether for stylus to replace previously lost or damaged tethers.
  

  • Not recommended when using fiber tipped stylus SKU# SG-STYLUS-TCX-MTL-03